GLIDEAWAY MOTION 400 User manual

QUICK START GUIDE: MOTION 400
1
E
A
INCLUDED
DE
G
HI J
K
x6
x2
x2 x2
x2
BC
INSTRUCTIONS (continued on back)
F
A
TO CONTROL BOX
LOCK
3
2
4
IMPORTANT
All 6 legs must be tightened securely to
base before turning base over for use.
WARNING
DO NOT TILT or LEAN base on legs when
turning base over.
DO NOT rest bed on its side as damage to
USB port will occur.
Repeat on both sides of base.
B
I
D
H
G
TO OUTLET
6
J
C
7
F
F
B
for use with TXL,
SCK, SQ models only
KEEP HANDS CLEAR OF HINGE PINCH POINT
Lay the base at before unfolding base.
5
ZG
MEMORY
A
FLAT
POSITIONS
MEMORY
B
ANTI
SNORE

QUICK START GUIDE: MOTION 400
SAFETY INFORMATION
ATTENTION!
IMPORTANT SAFETY INSTRUCTIONS. SAVE THIS MANUAL! PLEASE READ
THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT.
PROPER OPERATION OF YOUR ADJUSTABLE BED IS NECESSARY TO
ENSURE THE LONG LIFE AND DURABILITY YOU EXPECT FROM A HIGH
QUALITY PRODUCT. THE MANUFACTURER HAS TESTED AND INSPECTED
THIS PRODUCT PRIOR TO SHIPMENT.
RADIO FREQUENCY IS 2.4 GHZ
FCC compliance device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation. Any
change to the antenna or the device could result in the device exceeding the
RF exposure requirements and void the user’s right to operate the device.
The input voltage is AC100-240 50/60HZ; the output voltage is DC29V 1.8A.
ELECTRICAL SAFETY
Always unplug this adjustable bed frame from the electrical outlet before
any cleaning or maintenance of the bed frame. To safely disconnect, remove
the plug from the outlet. Keep cord away from heated surfaces. Use only
indoors. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO MOISTURE. Discontinue use of this adjustable bed
base and contact the manufacturer for repair if: (1) it has a damaged cord
or plug, (2) it is not working properly, (3) it has been dropped or damaged.
FOR OPTIMAL SAFETY, YOUR ADJUSTABLE BED SHOULD BE PLUGGED
INTO A SURGE PROTECTOR (not supplied with this adjustable bed).
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced.
Replace only with the 6LR61 9V batteries and LR03 AAA batteries.
2. Be sure to follow the correct polarity when installing the batteries as
indicated in the battery compartment. A reversed battery may cause
damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline,
Rechargeable and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can
overheat and rupture. (Follow battery manufacturer’s directions.)
WARRANTY WARNING
This bed is specically designed to require no maintenance by you, the user.
Any opening or tampering with the control box, motors or hand controls
(with the exception of the battery compartment, if equipped) will void the
warranty. Do not attempt to alter component wiring or adjust or modify the
structure of the product in any way or the warranty will be void. Only those
authorized may conduct repairs or part replacement on your adjustable bed.
IN-HOME USE ONLY
This adjustable bed is designed exclusively for in-home use.
HOSPITAL/COMMERCIAL DISCLAIMER
This base is NOT designed for commercial or hospital use and is NOT
designed to meet hospital standards. Do not use this base with TENT TYPE
oxygen therapy equipment or use near explosive gases.
PRODUCT RATINGS
Lift Motor Restrictions: The lift motors in this bed are NOT designed
to operate continuously for more than one (1) minute over a nine (9)
REV 07.17. 20
SYNCING 2 BASES TO ACT AS ONE
minute time period, or approximately 12% duty cycle. To ensure reliable
functionality and full life of this product, do not attempt to exceed these
limits. NOTE: Attempting to circumvent or exceed this rating will shorten the
life expectancy of the product and may void the warranty.
Weight Restrictions: The recommended weight limits on our adjustable
beds are: Queen: 600 lb Full/XL: 500 lb Twin/XL: 400 lb (800 lb if using
two twin XLs as a King) 1/pc King: 800 lbs
The structure of the bed will support the recommended weight when
distributed evenly across the bed. The head and foot sections are not
designed to individually support or lift this amount of weight. For optimal
performance and integrity of structure, enter and exit ONLY when head
and foot sections are at. NOTE: Exceeding the recommended weight
restrictions could damage your adjustable bed and void your warranty.
SMALL CHILDREN AND PETS WARNING
Immediately dispose of all packing materials as they can pose a smothering
risk to small children and pets. Injury could occur also if children or pets are
permitted to play on or under the bed. Do not allow children to operate this
bed without adult supervision.
LUBRICATION AND CLEANING
This product is designed to be maintenance free. The lift motors are
permanently lubricated and sealed—no additional lubrication is required.
Do not apply lubricant to lift motor lead screws or any nylon nuts or the base
may inadvertently creep downward from the elevated position.
LIFT WARNING
DO NOT SIT ON THE HEAD OR FOOT SECTIONS WHILE IN THE RAISED
POSITION, OR DURING LIFT OR LOWERING CYCLES.
LOCATION ENVIRONMENT
The level of sound experienced during operation is directly related to the
location environment. For example, when a base is located on a hardwood
oor with the vibe feature in operation, a vibrating tone will be audible. To
minimize this resonance, place a piece of carpet under each leg of the base.
It is possible to experience vibration or noise from the headboard brackets,
headboards or foot boards if mounting bolts are not rmly tightened.
MOVING AFTER INSTALLATION
Do not place adjustable bed base vertically on its head, foot sections or
sides. This may cause injury to persons or damage to base.
WARNINGS
To reduce the risk of burns, re, electric shock, or injury to persons:
• Unplug from outlet before putting on or taking off accessories.
• Close supervision is necessary when this base is used by, or near
children, invalids, disabled persons, or pets.
• Use this base only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
• Never operate this base if it has a damaged cord or plug, is not working
properly, has been dropped or damaged, or dropped in water.
• Keep the cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
• To disconnect, remove plug from outlet.
• DO NOT USE NEAR PEOPLE USING OR WEARING MEDICAL DEVICES.
FOR HOUSEHOLD/RESIDENTIAL USE ONLY.
Simultaneously press
and hold the HEAD
UP and HEAD DOWN
buttons on remote until
the remote back lights
ash and stay lit, then
release remote buttons.
Double click the PAIR
button on the control
box (light will turn
blue during the pairing
process).
With both bases
in FLAT position,
connect each base to
the other by inserting
SYNC CABLE into
each control box slot
labeled sync.
If SYNCING 2 bases (TXL, SCK, SQ)
together, follow these instructions.
KCustomer Service
1-855-581-3095
Owner’s manual and warranty information
are available at glideaway.com
PAIRING REMOTE TO BASE
NOTE:
Your base comes with a ready-to-use,
factory paired remote. Pairing instructions
are for replacement remotes or trouble
shooting purposes.