Global Fire Equipment Vulcan 2 CS User manual

Instruction Manual V3 - 02/2016
Vulcan 2 CS
Conventional Sounder - Beacon
The VULCAN 2 CS is a low consumption
conventional sounder designed to be used as
an unobtrusive low profile sounder or as a
base sounder to be installed in conjunction
with a detector. This leads to reduced
installation costs and improves the aesthetics
of the fire alarm system.
Four different tones are available and selected
by a 2-way DIL switch. The Sound level can be
lowered if required using the potentiometer.
MECHANICAL SPECIFICATION
FEATURES
High Quality
Certified to EN54-3
Low Current Consumption Max.
6.0 mA Combined Sounder/Beacon
Available in both White
and Red Colours
Enclosure Construction Material
Flame Retardant rating 94V0
White ABS - Transparent PC
Weight
Base Sounder - 100 g*
Including Lid - 120 g
*Including electronic circuits
and fixings
Protection
Type A - Indoor Use
Rating IP21C
100 mm
37.5 mm
29 mm
Made in Portugal - EU
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL
Tel: [phone] • Sales: [e-mail] • Technical Support: [e-mail] • www.globalfire.pt
20 V to 30 V DC
Beacon 2.5 mA
0.5-2.5 mm²
White or Red / ABS
o o
-10 C to 55 C / 95% RH Non-Condensing
100 (D) x 50 (H) mm inc. base / 144 g inc. base
71 db
75 db
78 db
89 db
o
15
o
15
75 db
77 db
79 db
88 db
o
45
o
45
82 db
80 db
80 db
96 db
o
75
o
75
79 db
82 db
80 db
93 db
o
105
o
105
75 db
76 db
79 db
90 db
o
165
o
165
o
135
o
135
80 db
75 db 75 db 80 db 76 db 76 db80 db
81 db
80 db
96 db
2.5 mA
5 mA
2.5 mA
2.5 mA
3.3 mA
6.0 mA
3.3 mA
3.3 mA
SOUNDER SOUNDER/BEACON
SUPPLY VOLTAGE
SOUNDER / BEACON ACTIVE
Sweeping Tone 800-1000 Hz
Alternating High Freq. 2.7-3.2 Khz
Continuous Tone 800 Hz
Alternating Low-Freq. 800-1000 Hz
LOOP CURRENT - BEACON
MINIMUM SOUNDER OUTPUT @ 1 metre/ 20 V DC
Angle
Alternating High Freq. 2.7-3.2 Khz
Continuous Tone 800 Hz
Sweeping Tone 800-1000 Hz
Alternating Low-Freq. 800-1000 Hz
MAXIMUM SOUNDER OUTPUT @ 1 metre/ 30VDC
Angle
-
CABLE SIZE
COLOUR / CASE MATERIAL
OPER. TEMPERATURE / MAX. HUMIDITY
DIMENSIONS / WEIGHT
TECHNICAL SPECIFICATIONS
ORDER CODE
2.5 mA
5 mA
2.5 mA
2.5 mA
3.3 mA
6.0 mA
3.3 mA
3.3 mA
SOUNDER SOUNDER/BEACON
100 mm
37.5 mm
1234 5 6 7 8
29 mm
VULCAN 2 CS
VULCAN 2 CSB
VULCAN 2 CB
VULCAN 2 L
VULCAN 2 LT
DESCRIPTION
CONVENTIONAL BASE SOUNDER
CONVENTIONAL BASE SOUNDER W/ BEACON
CONVENTIONAL BEACON
LID FOR VULCAN 2
TRANSPARENT LID FOR VULCAN 2
20 V to 30 V DC
Beacon 2.5 mA
96 dB (@ 1 meter - 30 V DC)
0.5-2.5 mm²
White or Red / ABS
o o
-10 C to 55 C / 95% RH Non-Condensing
100 (D) x 50 (H) mm inc. base / 144 g inc. base
SUPPLY VOLTAGE
SOUNDER / BEACON ACTIVE
SWEEPING TONE 800-1000 Hz
ALTERNATING HIGH FREQ. 2.7-3.2 Khz
CONTINUOUS TONE 800 Hz
ALTERNATING LOW-FREQ. 800-1000 Hz
LOOP CURRENT - BEACON
MAXIMUM S
CABLE SIZE
COLOUR / CASE MATERIAL
OPER. TEMPERATURE / MAX. HUMIDITY
DIMENSIONS / WEIGHT
OUNDER OUTPUT
CERTIFICATE N0.
1328-CPR-0289
1328-CPR-0289
-
-
-

CONNECTIONS AND TONE CONNECTIONS
Please note that this device is polarised.
NOTE:
Only last device in Sounder Circuit should have e.o.l. (end of line)
fitted across + and - terminals.
To next device
in Sounder Circuit
Volume
Adjustment
Sounder
Circuit
PANEL
SWEEPING
TONE
800-1000 Hz
CONTINUOUS
TONE
800 Hz
ALTERNATING
LOW-FREQUENCY TONE
800-1000 Hz
ALTERNATING
HIGH-FREQUENCY TONE
2.7 KHz-3.2 KHz
T - Tone
T
T
T
T
T
- Vol +
T - Tone
T
E.O.L
Conventional
Sounder Base