
3
Cleaning and maintenance
The unit is heating up during operation, reaching high temperature, so before cleaning the
unit must be switched off. Also, the unit must be left for the time of cooling down
completely. For cleaning purposes use the soft cloth with small amount of washing liquid.
Neither the equipment nor electric wires can be cleaned with running water or immersed in
the water. Do not use sharp tools for scrubbing.
Warning- temperature setting
The panel is equipped with temperature control device for monitoring ambient
temperature. Do not use the panel in small rooms occupied by people unable to leave the
room without assistance, unless they are supervised.
Do not cover the unit
Due to high operation temperature do not cover the unit.
Safety instructions for fixing and operation of heating unit
Do not fix the unit directly under the socket.
Due to the application and protection degree the unit shall be connected to sockets
with pin.
Do not install the unit in the proximity of the bath-tube, shower or sink.
Connect only to the 230V AC inlet.
Do not immerse the unit in the water.
Do not place any objects on the unit and do not cover it- danger of overheating
exists.
At all times it is necessary to provide access for and possibility to switch the unit off
using switch or thermostat.
In case of direct connection, connect the unit to the junction box.
Minimum distance from other objects must be 50 cm in the from, 50 cm laterally and
10 cm from the top.