Globe GPS10 User manual

Instruction Manual for Globe
Portion Control Scale Model GPS10
Serial #:
Visit our website for information on additional
products available from Globe.
GLOBE FOOD EQUIPMENT CO.
2153 DRYDEN RD.
DAYTON, OH 45439
PHONE: [phone]
TOLL FREE: 800-347-5423
FAX: [phone]
www.globeslicers.com
Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers & Scales
This manual contains important safety instructions which
must be strictly followed when using this equipment.
- IMPORTANT SAFETY NOTICE -
Globe Food Equipment Company (“GFE”) warrants to the original purchaser of new equipment that said
equipment, when installed in accordance with our instructions within the United States and subject to
normal use, is free from defects in material or workmanship for a period of one year (excludes wear/
expendable parts) from purchase date. Contact factory for warranty procedures if scale failure occurs.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR
IMPLIED. GFE EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
EXPRESSED OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
GFE’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO
REPAIRING OR REPLACING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL
OR WORKMANSHIP WITHIN THE APPLICABLE WARRANTY PERIOD. All repairs pursuant to this
Warranty will be performed by an Authorized Designated GFE Service Location during normal working
hours. IN NO EVENT SHALL GFE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
TO BUYER OR ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION, LOSS OF PROPERTY,
PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR OTHER ECONOMIC LOSSES, OR
STATUTORY OR EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE,
WARRANTY, STRICT LIABILITY, OR OTHERWISE.
This warranty is given only to the rst purchaser from a retail dealer. No warranty is given to
subsequent transferees.
Periodic maintenance of equipment including but not limited to weight checks or recalibration, damage
to load cell, lost parts, misuse and abuse, adjustments, water damage, improper installation, and
normal wear are not covered under this warranty.
This warranty is not in force until such time as an online registration form has been received
by GFE within 30 days from the date of installation. Register at www.globeslicers.com/warranty.asp.
THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT
BETWEEN THE BUYER AND SELLER. GFE NEITHER ASSUMES NOR AUTHORIZES ANY
PERSONS TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH
SAID EQUIPMENT.
Visit our website to register your procuct
WWW.GLOBESLICERS.COM
Limited Scale Warranty
© Globe Food Equipment Company, 2013
Printed 2-2013
*NOT LEAGAL FOR TRADE
WARRANTY REGISTRATION
SCAN THE QR CODE WITH YOUR MOBILE
DEVICE OR GO TO WWW.GLOBESLICERS.
COM TO FILL OUT AND SUBMIT YOUR
WARRANTY REGISTRATION.
http://www.globeslicers.com/site/warranty.asp

This manual contains a number of precautions to follow in order to help promote safe
use of this equipment.
Warnings affecting your personal safety are indicated by:
Warnings related to possible damage to the equipment are indicated by:
To ensure proper and safe operation, the general safety tips below must be followed.
• DO NOT disassemble the scale.
• ONLY trained and qualied service personnel should attempt repairs.
• DO NOT drop or apply a strong shock to the scale.
• DO NOT leave any items on the weighing platter. This can damage the scale.
• NEVER immerse the scale in water.
• DO NOT put the scale in a dishwasher.
1. Place the scale on a stable at surface.
2. Get power to the unit by...
a. Installing Batteries – Open the lid on the bottom of the scale and install three
C-batteries. NOTE: Batteries are not included with the scale.
b. Or connect the AC Adaptor to the receptacle located on the right side of the
scale and plug into an electrical outlet.
3. Place the stainless steel weighing platter over the top portion of the scale.
4. Adjust the feet of the scale until the level’s air bubble remains in the center of the
circle (located on the front of the scale).
1. Make sure nothing is on or touching the weighing platter.
2. Turn the unit on by pressing the On/Off key. The scale display will initially show
all 8’s and after three seconds the display will show 0’s. NOTE: A “Lo” warning
will appear on the display when the battery power is insufcient.
Safety Tips
Installation
Operating Instructions
3. The scale weighs in pounds (lb), ounces (oz), kilograms (kg), and grams (g) mode.
Press the Units key to switch between weighing modes. An arrow will illuminate
on the display screen next to the unit of measure selected.
4. The scale can weigh in Gross or Net modes.
a. If Net weighing is needed, place the empty container (or tare weight) on the
weighing platter and press the Tare/Zero key.
b. The display will show zeros and an arrow will illuminate on the left of the
display next to Tare.
c. When the empty container is removed from the weighing platter, the tare
weight is shown as a negative amount and is indicated by an arrow on the
display next to tare.
d. NOTE: When no tare weight is used, you are in the Gross weighing mode and
there will be no arrow next to tare.
5. Place the product (including container if tare weight is being used) on the stainless
steel weighing platter. The total weight is displayed.
NOTE: If the weight of the object is over the maximum capacity, the display will
show “----”. Remove the object from the patter and reduce the weight of the object.
6. Remove the rst product and continuing weighing the next item. If the tare weight
needs to be changed for a new product, then press the Tare/Zero key again to set it
to zero and repeat the steps above for Net weighing.
7. Press the On/Off key to turn the scale off. NOTE: The scale will automatically
shut-off after 5 minutes of no activity whether it is operating on battery or AC power.
• NEVER place scale in sink or dishwasher.
• DO NOT hose down or pressure wash any part of the scale.
•Excess moisture will damage scale and void warranty.
1. If the scale is running on AC power, unplug the scale.
2. Remove the stainless steel platter and wash with warm soapy water.
3. Soak a clean cloth in a mild detergent and warm water solution. Ring out excess
water from cloth. Clean and wipe down the entire scale. Use a mild, non-bleach,
non-chlorine sanitizer if required. Dilute sanitizer per supplier’s instruction!
Cleaning
Operating Instructions