Globe GPS5 User manual

Instruction Manual for Globe
Portion Control Scale Model GPS5
Serial #:
Visit our website for information on additional
products available from Globe.
GLOBE FOOD EQUIPMENT CO.
2153 DRYDEN RD.
DAYTON, OH 45439
PHONE: [phone]
TOLL FREE: 800-347-5423
FAX: [phone]
www.globeslicers.com
Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers & Scales
This manual contains important safety instructions which
must be strictly followed when using this equipment.
- IMPORTANT SAFETY NOTICE -
Globe Food Equipment Company (“GFE”) warrants to the original
purchaser of new equipment that said equipment, when installed in
accordance with our instructions within North America and subjected to
normal use, is free from defects in material or workmanship for a period of
1 year from installation or 18 months from actual shipment date, whichever
date occurs rst.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER
EXPRESSED OR IMPLIED. GFE EXPRESSLY DISCLAIMS ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESSED OR
IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
GFE’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS
EXPRESSLY LIMITED TO REPAIRING AND REPLACING EQUIPMENT
WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP
WITHIN THE APPLICABLE WARRANTY PERIOD. All repairs pursuant
to this Warranty will be performed by an Authorized Designated GFE
Service Location during normal working hours. IN NO EVENT SHALL
GFE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
TO BUYER OR ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION,
LOSS OF PROPERTY, PERSONAL INJURY, LOSS OF BUSINESS
OR PROFITS OR OTHER ECONOMIC LOSSES, OR STATUTORY OR
EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE, WARRANTY,
STRICT LIABILITY, OR OTHERWISE.
This warranty is given only to the rst purchaser from a retail dealer. No
warranty is given to subsequent transferees.
Periodic maintenance of equipment including, but not limited to, weight
checks or calibration, damage to load cell, lost parts, misuse and abuse,
adjustments, water damage, improper installation, and normal wear are
not covered under this warranty.
This warranty is not in force until such time as an online registration form
has been received by GFE within 30 days from the date of installation.
Register at www.globeslicers.com/warranty.asp.
THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND
EXCLUSIVE STATEMENT BETWEEN THE BUYER AND SELLER. GFE
NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO ASSUME
FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION
WITH SAID EQUIPMENT.
Visit our website to register your product
WWW.GLOBESLICERS.COM
Limited Scale Warranty
© Globe Food Equipment Company, 2012
Printed in the U.S.A. 2-2012
*NOT LEGAL FOR TRADE

This manual contains a number of precautions to follow in order to help promote safe
use of this equipment.
Warnings affecting your personal safety are indicated by:
Warnings related to possible damage to the equipment are indicated by:
To ensure proper and safe operation, the general safety tips below must be followed.
• DO NOT disassemble the scale.
• ONLY trained and qualied service personnel should attempt repairs.
• DO NOT drop or apply a strong shock to the scale.
• DO NOT leave any items on the weighing platter. This can damage the scale.
• NEVER immerse the scale in water.
• DO NOT put the scale in a dishwasher.
1. Place the scale on a stable at surface.
2. Get power to the unit by...
a. Installing Batteries – Open the lid on the bottom of the scale and install three
AA-batteries. NOTE: Batteries are not included with the scale.
b. Or connect the AC Adapter to the receptacle located on the right side of the
scale and plug into an electrical outlet.
3. Place the stainless steel weighing platter over the top portion of the scale.
1. Make sure nothing is on or touching the weighing platter.
2. Turn the unit on by pressing the On/Off key. The scale display will initially show
all 8’s and after three seconds the display will show 0’s.
3. The scale weighs in pounds (lb), ounces (oz), and grams (g) mode.
Safety Tips
Installation
Operating Instructions
Press the Units key (U) to switch between weighing modes. An arrow will illuminate
on the display screen next to the unit of measure selected.
4. The scale can weigh in Gross or Net modes.
a. If Net weighing is needed, place the empty platter bowl provided on to the
weighing platter. (Tare weight of the platter bowl). Press the Tare (T) key.
b. The display will show zeros and an arrow will illuminate on the left of the
display next to Tare.
c. When the empty platter bowl is removed from the weighing platter, the Tare
weight is shown as a negative amount and is indicated by an arrow on the
display next to Tare.
d. NOTE: When no Tare weight is used, you are in the Gross weighing mode and
there will be no arrow next to Tare.
5. Place the product (including the platter bowl if Tare weight is being used) on the
stainless steel weighing platter. The total weight is displayed.
NOTE: If the weight of the object is over the maximum capacity, the display will
show “----”. Remove the object from the patter and reduce the weight of the object.
6. Remove the rst product and continuing weighing the next item. If the Tare weight
needs to be changed for a new product, then press the Tare/Zero key again to set it
to zero and repeat the steps above for Net weighing.
7. Press the On/Off key to turn the scale off. NOTE: The scale will automatically
shut-off after 5 minutes of no activity whether it is operating on battery or AC power.
• NEVER place scale in sink or dishwasher.
• DO NOT hose down or pressure wash any part of the scale.
• Excess moisture will damage scale and void warranty.
1. If the scale is running on AC power, unplug the scale for cleaning.
2. Remove the stainless steel platter and platter bowl. Wash them with warm soapy
water.
3. Soak a clean cloth in a mild detergent and warm water solution. Ring out excess
water from cloth. Clean and wipe down the entire scale. Use a mild, non-bleach,
non-chlorine sanitizer if required. Dilute sanitizer per supplier’s instruction!
Cleaning
Operating Instructions