GME G COM GX400 User manual

Marine and CB frequencies (user selectable)
Waterproof speaker microphone
Large backlit LCD screen with dimming function
Ingress protection to IPX7*
Channel scanning with memory
Dual watch and triple watch functions
Channel 88 safety channel for marine application
Two priority channels
Available in black or white, multiple mounting options
GME’s GX400 is a versatile marine communication tool featuring both 27 MHz
Marine Band and 27 MHz Citizen Band transceivers in one unit. Built tough to
withstand some of the harshest environments in the world, the GX400 is equally
at home at sea or on land.
Switchable
Frequency
GX400
27 MHz RADIO

Iss.2 - 11/16
Dealer:
SPECIFICATIONS
Ingress protection to IPX7* allows the GX400 to be positioned right on the
dashboard, either by flush mount or gimbal bracket mount as supplied.
With a compact mounting depth of only 45 mm, it’s possible to mount this
compact unit into tight locations where space is limited.
For enhanced clarity and ease of use, the GX400 is equipped with dual
speakers. One in the front panel and a second built into the waterproof
speaker mic.
The optional SPK45 extension speaker can be added to your installation,
ensuring clear audio no matter where you are on the vessel.
With programmable channel scanning, dual and tri-watch functions, users
will be sure to not miss important communications, and the large red
Channel 88 channel button enables simple emergency communication in the
case of distress.
Available in black or white, the GX400 is a stylish and versatile addition to
your vessel.
ACCESSORIES INCLUDED
Cabin cover
Mounting bracket, gimbal knobs and hardware
Microphone bracket
DC power lead
Instruction manual
OPTIONAL ACCESSORIES
MK008B Flush mounting bracket – Black
MK008W Flush mounting bracket – White
MK011B Flush mounting bracket large – Black
MK011W Flush mounting bracket large – White
SPK45B Extension speaker – Black
SPK45W Extension speaker – White
Manufactured under a management system
certified as complying with ISO 9001: 2008
by SGS Australia Pty. Ltd.
The GX400 will operate over the 26 – 30 MHz frequency range. For information specific to
frequencies outside of the Australian Marine or the Australian and New Zealand CB bands,
please refer to the appropriate amendment, or contact GME at: [e-mail].
*http://www2.gme.net.au/IPRatings
GENERAL
Complies with AS4367:2007
Frequency Range 26 – 30 MHz
Channel Set Australian 27 MHz CB (26.965 – 27.405 MHz)
Australian Marine (27.680 – 27.980 MHz)
Modulation AM (A3E)
Supply Voltage 12 V DC nominal
10.8 – 15.6 V DC range
Frequency Error ±1.4 kHz
Dual Watch Monitor time – 250 ms
Scan Rate 5 channels/second
TRANSMITTER
Modulation Frequency Response 300 Hz to 3 kHz, + 1 – 3 dB
Max Modulation Depth 100%
Carrier Output Power 4 watts max
Spurious Emissions <-26 dBm
RECEIVER
Demodulated Frequency
Response
300 Hz to 3 kHz, + 1 – 3 dB
Receive Sensitivity for 12 dB
SINAD @ 30% Modulation
-110 dBm
Max Squelch < -65 dBm
Adjacent Channel Sensitivity ≥ 55 dB
Spurious Response Immunity ≥ 55 dB
Conducted Spurious Radiation ≤-57 dBm
Audio Output Power 8 Ohms 2.5 watts
MECHANICAL
Dimensions 169 (w) x 68 (h) x 74 (d) mm
Weight 450 grams
ENVIRONMENTAL
Temperature Range -0°C to +55°C
Specifications are subject to change without notice or obligation.
GX400
27 MHz RADIO
A division of Standard Communications Pty Ltd.
AUS: 1300 463 463. NZ: [phone].
All international enquiries email: [e-mail]