GOAL ZERO Lighthouse 400 User manual

1

1
FREQUENTLY ASKED QUESTIONS
Table of Contents
Frequently Asked Questions 1
Get To Know Your Gear 2-3
How It Works 4-5
Technical Specifications 6-7
Français 8-15
日本語 16-23
Deutsch 24-31
Español 32-39
How often do I need to charge the Lighthouse 400?
It is recommended to charge your Lighthouse 400
lantern every 3 months. The blue LED lights indicate
the current battery level.
Does it matter what direction I turn the hand crank?
Nope. You can turn the hand crank in either direction
for power. Remember, 1 minute of crank time equals
about 10 minutes of light on low.
Goal Zero products:
Nomad Solar Panels
Sherpa Power Packs
Goal Zero Yeti Solar Generators
CHARGE FROM
DEMO MODE
Take the Lighthouse 400 out of the current demo
mode by quickly turning the hand crank three times,
enough for the blue battery indicator to illuminate.

1
FREQUENTLY ASKED QUESTIONS
Table of Contents
Frequently Asked Questions 1
Get To Know Your Gear 2-3
How It Works 4-5
Technical Specifications 6-7
Français 8-15
日本語 16-23
Deutsch 24-31
Español 32-39
How often do I need to charge the Lighthouse 400?
It is recommended to charge your Lighthouse 400
lantern every 3 months. The blue LED lights indicate
the current battery level.
Does it matter what direction I turn the hand crank?
Nope. You can turn the hand crank in either direction
for power. Remember, 1 minute of crank time equals
about 10 minutes of light on low.
Goal Zero products:
Nomad Solar Panels
Sherpa Power Packs
Goal Zero Yeti Solar Generators
CHARGE FROM
DEMO MODE
Take the Lighthouse 400 out of the current demo
mode by quickly turning the hand crank three times,
enough for the blue battery indicator to illuminate.

2 3
HANG IT
Put the Lighthouse 400 anywhere
with the built-in hanger.
CHARGE IT
Charge through any USB port, with the
dynamo crank, or with Goal Zero solar panels.
POWER IT
Use the USB port to recharge a
phone or boost a tablet.
LIGHT IT
Multiple brightness and directional lighting
options. Red light for emergencies.
STAND IT
Convenient foldaway legs for easy
transport and hassle-free storage.
GET TO KNOW YOUR GEAR

4 5
Dynamo Crank
Recharge by dynamo crank function: flip the
crank handle up from the top of the lantern
and rotate. One minute of cranking will provide
approximately ten minutes of light on low power.
USB Rechargeable Light
Power up the Lighthouse 400 from any USB
port with the built-in cord. Blue LED lights
indicate battery level.
Dualite™ Directional Lighting
Turn the knob right or left for different
directional lighting and brightness options.
Emergency Light
Push the triangle button for red, emergency
alert mode.
Power Your Gear
Recharge smartphones, and boost tablets
through the USB port.
HOW IT WORKS

4 5
Dynamo Crank
Recharge by dynamo crank function: flip the
crank handle up from the top of the lantern
and rotate. One minute of cranking will provide
approximately ten minutes of light on low power.
USB Rechargeable Light
Power up the Lighthouse 400 from any USB
port with the built-in cord. Blue LED lights
indicate battery level.
Dualite™ Directional Lighting
Turn the knob right or left for different
directional lighting and brightness options.
Emergency Light
Push the triangle button for red, emergency
alert mode.
Power Your Gear
Recharge smartphones, and boost tablets
through the USB port.
HOW IT WORKS

6 7
Hand Crank:
Hand Crank 1 W (cranking at 130 RPM)
1 minute of crank =
10 minutes of light on low
Ports:
USB Port (output) 5V, up to 1.5A (7.5W max),
regulated
USB Port (input) 5V, up to 1A (5W max)
General:
Chainable No
Weight 1.1 lbs (498 g)
Dimensions 4.5 x 5 x 6.5 in
(11.4 x 12.7 x 16.5 cm)
Operating Usage Temp. 32-104 F (0-40 C)
Certs
Warranty 12 months
Be sure to register your product at goalzero.com/support
Charge times:
Nomad 7 7-14 hrs
USB Source 5 hrs
Run time:
One Side Lit (low power) 48 hrs
One Side Lit (high power) 6 hrs
Both Sides Lit (low power) 24 hrs
Both Sides Lit (high power) 2.5 hrs
Battery:
Cell Chemistry Li-ion NMC
Cell Capacity 16.3Wh (3.7V, 4400mAh)
Lifecycles Hundreds of cycles
Shelf-life Charge every 3-6 months
Fuses None
Management System Charging and low-battery
protection built-in
Light:
LED (output) 2x3W warm white LED 400
Lumens
Color Temperature 3,500 Kelvin
TECHNICAL SPECIFICATIONS

6 7
Hand Crank:
Hand Crank 1 W (cranking at 130 RPM)
1 minute of crank =
10 minutes of light on low
Ports:
USB Port (output) 5V, up to 1.5A (7.5W max),
regulated
USB Port (input) 5V, up to 1A (5W max)
General:
Chainable No
Weight 1.1 lbs (498 g)
Dimensions 4.5 x 5 x 6.5 in
(11.4 x 12.7 x 16.5 cm)
Operating Usage Temp. 32-104 F (0-40 C)
Certs
Warranty 12 months
Be sure to register your product at goalzero.com/support
Charge times:
Nomad 7 7-14 hrs
USB Source 5 hrs
Run time:
One Side Lit (low power) 48 hrs
One Side Lit (high power) 6 hrs
Both Sides Lit (low power) 24 hrs
Both Sides Lit (high power) 2.5 hrs
Battery:
Cell Chemistry Li-ion NMC
Cell Capacity 16.3Wh (3.7V, 4400mAh)
Lifecycles Hundreds of cycles
Shelf-life Charge every 3-6 months
Fuses None
Management System Charging and low-battery
protection built-in
Light:
LED (output) 2x3W warm white LED 400
Lumens
Color Temperature 3,500 Kelvin
TECHNICAL SPECIFICATIONS

CA082316
GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
1-888-794-6250
Designed in the U.S.A.
Made in China
Nomad is a trademark of Goal Zero.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.