Goji G5WC19C User manual

IB-G5WC19C-200115V2
Declaration of Conformity (RED)
Hereby, DSG Retail Ltd. declares that the radio
equipment type [G5WC19C] is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
https://www.teamknowhow.com/
Click on SEARCH and enter the model number.
Wireless Charging Pad
Instruction Manual
G5WC19C
Specications
Power Supplies Input: 5V 2A
Output: 5V 1A
Charging Distance 6 mm (max.)
Frequency Band(s) 108 – 150.5 KHz
Max. Radio Frequency
Power Transmitted
2 dBuA/m @10m distance
Dimension (L x W x H) 84 x 84 x 13.5 mm
Net Weight 47 g
Features and specications are subject to change without
prior notice.
Trouble Shooting
If any functional abnormality is encountered, unplug the
unit from the mains socket and reconnect it again. Replace
your mobile device on the unit.
1. The LED indicator ash in red.
a) Mobile device is not placed in a correct position.
b) Placing any metal or other item with electric eld
may cause short circuit, such as credit card, key,
memory card, etc.
c) The charging system is malfunction.

Thank you for purchasing your new
product.
We recommend that you spend some time reading
this instruction manual in order that you fully
understand all the operational features it oers.
You will also nd some hints and tips to help you
resolve any issues.
Read all the safety instructions carefully before
use and keep this instruction manual for future
reference.
Product Overview
LED indicator
Qi sensor USB input socket
Charging Your Digital Devices
1. Connect the USB charging cable to the product.
2. Connect the other end of the USB charging cable to a
powered USB device.
3. Place your mobile device on the top of the product.
Ensure it is on the right position/direction.
LED indicator
Qi sensor
This product only supports mobile device with
Qi feature.
Status Charging indicator
Charging Light up in red
Fully charged Light up in blue
Error Flash in red
(Charger sold
separately)
Charging pad’s Qi
sensor
Mobile device’s Qi
sensor
4. Both Qi sensors must overlap.