Gold Note ES78 User manual

Fig. 2
Fig. 1
ES78
OWNERʼS MANUAL
ES78
OWNERʼS MANUAL
Thank you for your purchase of the ES78 stereo cartridge.
Read these Operating Instructions carefully before using your ES78 and keep it for future reference.
Before Using
1. The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a finger can break it. Handle the
cartridge with the utmost care.
2. A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver or other such item near the
cartridge will result in it being attracted by the magnet and may result in damage to the stylus, so care must be taken.
Package Content
• Cartridge body
• Aluminium sets of head-shell xing 2,5mm screws and bolts
• Ownerʼs Manual
Method of Use
1. Mounting the cartridge on the tone arm Head-Shell using
the supplied Allen Wrench and one set of the 2,5mm screws.
Adjust it to the stylus position specified for the turntable
system you are using mounting it properly without tilting or
turning it. (See Figure 1.)
• The output terminals are colours coded for identification
as illustrated in Figure 2.
Match the colors of the tone arm head-shell leads to the
terminals and connect each other properly.
NOTE:
When connecting the cartridge, be sure to use the tipped
leads and press them onto the terminals.
Applying heat to the output terminals of the cartridge, such
as in direct soldering, will cause internal damage to the coils.
Method of Use
1. Mounting the cartridge on the tone arm Head-Shell using
the supplied Allen Wrench and one set of the 2,5mm screws.
Adjust it to the stylus position specified for the turntable
system you are using mounting it properly without tilting or
turning it. (See Figure 1.)
• The output terminals are colours coded for identification
as illustrated in Figure 2.
Match the colors of the tone arm head-shell leads to the
terminals and connect each other properly.
NOTE:
When connecting the cartridge, be sure to use the tipped
leads and press them onto the terminals.
Applying heat to the output terminals of the cartridge, such
as in direct soldering, will cause internal damage to the coils.
Thank you for your purchase of the ES78 stereo cartridge.
Read these Operating Instructions carefully before using your ES78 and keep it for future reference.
Before Using
1. The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a finger can break it. Handle the
cartridge with the utmost care.
2. A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver or other such item near the
cartridge will result in it being attracted by the magnet and may result in damage to the stylus, so care must be taken.
Package Content
• Cartridge body
• Aluminium sets of head-shell xing 2,5mm screws and bolts
• Ownerʼs Manual
GREEN (right ch. -)
RED (right ch. +)
WHITE (Left ch. +)
BLUE (Left ch. -)
Fig. 2
Fig. 1
GREEN (right ch. -)
RED (right ch. +)
WHITE (Left ch. +)
BLUE (Left ch. -)
il suono italiano
GOLD NOTE
il suono italiano
GOLD NOTE
x2 x2

Tel. [phone]
www.goldnote.it
Tel. [phone]
www.goldnote.it
With its computer shape design achieving top audio performance, ES78 combines convenience and performance the best.
Its high dampening body firmly block the cartridge; its ultra-rigid cantilever in aluminium features a custom elliptical diamond tip,
exclusively developed for Gold Note.
To let you enjoy even the finest sound details, the cantilever is securely and directly installed into the metal body to enhance
structural rigidity for top trackability, so that you can experience the greatest and largest bandwidth response.
SPECIFICATIONS
Typology: MM Phono Cartridge
Output level: 4.0mV
Frequency response: 15-25000Hz
Impedance: 1000Ω
Suggested load: 47KΩ
Inductance: 500mH
Compliance: 10×10-6cm/dyne
Channel separation: > 22dB
Channel balance: < 2dB
Suggested tracking weight: 2.0g
Cantilever: Aluminum
Diamond: Micro Elliptical
Diamond size: 7.5*15.5µm
Coil Wire: Copper
Magnet: Samarium-Cobalt
Mounting hole diamond distance: 9mm
Physical
Total weight: 6g
With its computer shape design achieving top audio performance, ES78 combines convenience and performance the best.
Its high dampening body firmly block the cartridge; its ultra-rigid cantilever in aluminium features a custom elliptical diamond tip,
exclusively developed for Gold Note.
To let you enjoy even the finest sound details, the cantilever is securely and directly installed into the metal body to enhance
structural rigidity for top trackability, so that you can experience the greatest and largest bandwidth response.
SPECIFICATIONS
Typology: MM Phono Cartridge
Output level: 4.0mV
Frequency response: 15-25000Hz
Impedance: 1000Ω
Suggested load: 47KΩ
Inductance: 500mH
Compliance: 10×10-6cm/dyne
Channel separation: > 22dB
Channel balance: < 2dB
Suggested tracking weight: 2.0g
Cantilever: Aluminum
Diamond: Micro Elliptical
Diamond size: 7.5*15.5µm
Coil Wire: Copper
Magnet: Samarium-Cobalt
Mounting hole diamond distance: 9mm
Physical
Total weight: 6g