Gold Note Vasari Gold User manual

RED (right ch. +)
GREEN
(right ch. -)
WHITE (Left ch. +)
BLUE
(Left ch. -)
Fig. 2
x2
Fig. 1
RED (right ch. +)
GREEN
(right ch. -)
WHITE (Left ch. +)
BLUE
(Left ch. -)
Fig. 2
x2
Fig. 1
il suono italiano
GOLD NOTE
VASARIGOLD
OWNERʼS MANUAL il suono italiano
GOLD NOTE
VASARIGOLD
OWNERʼS MANUAL
Thank you for your purchase of the Vasari Gold stereo cartridge.
Read these Operating Instructions carefully before using your Vasari Gold and keep it for future reference.
Before Using
1. The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a finger can break it. Handle the
cartridge with the utmost care.
2. A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver or other such item near the
cartridge will result in it being attracted by the magnet and may result in damage to the stylus, so care must be taken.
Package Content
•Cartridge body
•Stainless Steel no-magnetic two sets of head-shell xing 2,5mm screws
•Ownerʼs Manual
Method of Use
1. Mounting the cartridge on the tone arm Head-Shell
using the supplied Allen Wrench and one set of the 2,5mm
screws. Adjust it to the stylus position specified for the
turntable system you are using mounting it properly
without tilting or turning it. (See Figure 1.)
• The output terminals are colours coded for identification
as illustrated in Figure 2.
Match the colors of the tone arm head-shell leads to the
terminals and connect each other properly.
NOTE:
When connecting the cartridge, be sure to use the tipped
leads and press them onto the terminals.
Applying heat to the output terminals of the cartridge, such
as in direct soldering, will cause internal damage to the
cartridge, such as wire breakage.
Thank you for your purchase of the Vasari Gold stereo cartridge.
Read these Operating Instructions carefully before using your Vasari Gold and keep it for future reference.
Before Using
1. The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a finger can break it. Handle the
cartridge with the utmost care.
2. A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver or other such item near the
cartridge will result in it being attracted by the magnet and may result in damage to the stylus, so care must be taken.
Package Content
•Cartridge body
•Stainless Steel no-magnetic two sets of head-shell xing 2,5mm screws
•Ownerʼs Manual
Method of Use
1. Mounting the cartridge on the tone arm Head-Shell
using the supplied Allen Wrench and one set of the 2,5mm
screws. Adjust it to the stylus position specified for the
turntable system you are using mounting it properly
without tilting or turning it. (See Figure 1.)
• The output terminals are colours coded for identification
as illustrated in Figure 2.
Match the colors of the tone arm head-shell leads to the
terminals and connect each other properly.
NOTE:
When connecting the cartridge, be sure to use the tipped
leads and press them onto the terminals.
Applying heat to the output terminals of the cartridge, such
as in direct soldering, will cause internal damage to the
cartridge, such as wire breakage.

Tel. [phone]
www.goldnote.it
Tel. [phone]
www.goldnote.it
With an innovative and beautiful shape, computer designed and then finely machined to achieve top audio performance, Vasari
combines style and technology.
Its high dampening body firmly block the cartridge; its ultra-rigid cantilever in aluminium features a custom elliptical diamond tip,
exclusively developed for Gold Note
To let you enjoy even the finest sound details, the cantilever is securely and directly installed into the metal body to enhance struc-
tural rigidity for top trackability, so that you can experience the greatest and largest bandwidth response.
Vasari completes our range of cartridges with the best designed MM model ever made.
Please Note: to preserve the uniqueness all Vasari Gold cartridges have the serial number indelibly printed.
SPECIFICATIONS
Typology: MM Phono Cartridge
Output level: 4.0mV
Frequency response: 15-25000Hz
Impedance: 1000Ω
Suggested load: 47KΩ
Inductance: 500mH
Compliance: 10×10-6cm/dyne
Channel separation: > 22dB
Channel balance: < 2dB
Suggested tracking weight: 2.0g
Cantilever: Aluminum
Diamond: Elliptical
Diamond size: 7.5*15.5µm
Coil Wire: Copper
Magnet: Alnico
Mounting hole diamond distance: 9mm
Physical
Total weight: 9.5g
Body
solid block machined Duraluminium
Color
black body - gold logo - gold name
With an innovative and beautiful shape, computer designed and then finely machined to achieve top audio performance, Vasari
combines style and technology.
Its high dampening body firmly block the cartridge; its ultra-rigid cantilever in aluminium features a custom elliptical diamond tip,
exclusively developed for Gold Note
To let you enjoy even the finest sound details, the cantilever is securely and directly installed into the metal body to enhance struc-
tural rigidity for top trackability, so that you can experience the greatest and largest bandwidth response.
Vasari completes our range of cartridges with the best designed MM model ever made.
Please Note: to preserve the uniqueness all Vasari Gold cartridges have the serial number indelibly printed.
SPECIFICATIONS
Typology: MM Phono Cartridge
Output level: 4.0mV
Frequency response: 15-25000Hz
Impedance: 1000Ω
Suggested load: 47KΩ
Inductance: 500mH
Compliance: 10×10-6cm/dyne
Channel separation: > 22dB
Channel balance: < 2dB
Suggested tracking weight: 2.0g
Cantilever: Aluminum
Diamond: Elliptical
Diamond size: 7.5*15.5µm
Coil Wire: Copper
Magnet: Alnico
Mounting hole diamond distance: 9mm
Physical
Total weight: 9.5g
Body
solid block machined Duraluminium
Color
black body - gold logo - gold name