golmar PCM/G+ User guide

PCM/G+
PCM/G+ REV.0121|ENGLISH
INSTALLER MANUAL

CATEGORY 1_HEADERCATEGORY 2_HEADER
2Footer Infos
INSTALLER MANUAL
PCM/G+IP G+
2
www.golmar.es
INDEX
1. Device description..............................................................................................................................................3
2. Connection..........................................................................................................................................................4
2.1. Connection to the monitor.......................................................................................................................4
2.2. Connection to the door opener................................................................................................................4
3. Operation ............................................................................................................................................................5

3
PCM/G+ IP G+
www.golmar.es
1. DEVICE DESCRIPTION
Camera with 70º viewing angle. Night vision leds
Call pushbutton
+ +
+
+
+
12325401
PLACA
INTERIOR
PCM/G+
GOLMAR S.A.
C/ Silici. 13, 08940 - SPAIN
V01
CN1
BLUE/AZUL(NA)
ORANGE/NARANJA(COM)
GREEN/VERDE(NC)
WHITE/BLANCO(AUDIO)
BLACK/NEGRO(GND)
RED/ROJO(POWER)
YELLOW/AMARILLO(VIDEO)
MICROPHONE SPEAKER
CN2
-
+
-
+
CN1 (Door opener connection
wire)
CN2 (Monitor connection
wire)
Private call interior panel dessigned to be directly connected to the monitor and perform the functions of doorbell for the apartment door.
It is necessary to use a 6502/G+ entry panel or a Nexa panel modular composition for its operation.Es necesario el uso de una placa
exterior 6502/G+ o una composición de placa Nexa modular para su funcionamiento.

4
PCM/G+IP G+
www.golmar.es
2. CONNECTION
2.1. Connection to the monitor:
For connecting the PCM/G+ interior panel to the monitor, we must connect the coloured wires of the monitor connection wire (CN2) with
the connector supplied matching both coloured wires.
Once done the step described before, we will plug the connector in the PCM IN port located in the backside of the monitor.
Monitors suitable for connection PCM/G+ interior panels are the ART 7G+/PCM, the ART 7W/G+/PCM and the Android monitor
ART 7AW/G+
2.2. Connection to the door opener
For connecting the PCM/G+ interior panel with the door opener, we will need to add a TF-104 AC power supply. To do the connection, we
will connect the coloured wires of the door opener connection wire (CN2) in the next way:
DUAL
POE
MONITOR IP 7”
ART 7/G+/48
12310704
GOLMAR S.A.
C/ Silici, 13
08940 - SPAIN
DUAL
POE
48V 48V
18V 18V
JP1
JP2
1 8
12V
GND
PCM IN
HZ+
HZ-
RJ45
PCM OUT
+ +
+
+
+
12325401
PLACA
INTERIOR
PCM/G+
GOLMAR S.A.
C/ Silici. 13, 08940 - SPAIN
V01
CN1
BLUE/AZUL(NA)
ORANGE/NARANJA(COM)
GREEN/VERDE(NC)
WHITE/BLANCO(AUDIO)
BLACK/NEGRO(GND)
RED/ROJO(POWER)
YELLOW/AMARILLO(VIDEO)
MICROPHONE SPEAKER
CN2
-
+
-
+
PRI 230V50/60HZ
SEC: 12V 6VA
12V
230V
TF-104
(*)
(*) Important: Place a varistor directly over the door opener connection terminals.

5
PCM/G+ IP G+
www.golmar.es
Once we have connected the PCM/G+ interior panel to the monitor and the door opener, we will need to enable it accessing the “Devices”
section in the system settings menu. en, just press the call pushbutton to make a call to the apartment monitor.
e monitor will be able to answer the call and open the door from the communication screen.
In case of a call from the PCM/G+ interior panel when the monitor is in communication with the door entry panel, a notication will appear
in the communication screen reporting the user that such a call is taking place.
If you want to preview images from the PCM/G+ interior panel only press the icon in the right bottom of the “View” screen.
3. OPERATION
Sistema
Devices
Lift control
Staircase light control
Floor number
Link to access control
Private call module

Sist
emas de comunicación S.A.
C/ Silici 13. Poligon Industrial Famadas
08940 – Cornellà del llobregat – Spain
[e-mail]
Telf: 934 800 699
www.golmar.es