Good Vibrations 4 Life Inc.™ Whole Body Oscillating Vibration Therapy GVM™ 4.
Safety Precautions
To maintain the operational standard of the GVM™, please note the following:
. Use the GVM™ only for its intended use as described in this user guide
2. Do not use force to relocate the GVM™. Move it gently, using the roller located on the bottom of the
GVM™. Undue care when moving may cause damage to the GVM™ or the floor surface.
3. When the machine is not in use, turn off the power on the GVM™ and unplug the power cord.
4. Take care not to damage the platform of the GVM™. Do not place heavy objects on it, or scratch or
bump the GVM™ with any force.
Electrical Hazard
The GVM is an electrical device and should be treated with appropriate care and caution.
The Power Source for the GVM™ is 0 to 20 Volts AC
The machine includes a ground electrical cord (three-pronged electrical cord, see figure , below).
Grounding reduces the possibility of electric shock if a short circuit occurs. Do not modify or interfere with
the grounding mechanism. If a grounded power source is not available in your location, consult a
qualified electrician for advice on grounding.
Do not use outside. The GVM™ is intended for indoor use.
Install the machine against a wall or other location where passersby will not trip over the power cord.
Protect the power cord from damage or abrasion. Do not roll up (coil) the power cord if the machine is to
be used. Coiling the power cord can cause electrical resistance and a possible dangerous buildup of heat.
Do not operate the machine with a damaged electrical cord.
Check the power cord for damage at regular intervals.
Do not touch the machine or the power cord with wet or damp hands, this could result in electrical shock,
presenting a health hazard to the user and/or damage to the machine.
If you unplug the machine, good by removing the plug. Do not pull on the power cord.
Do not drop or otherwise forcefully relocate the machine.
Do not operate the machine if the machine appears to be damaged.
Do not attempt to fix the machine if it is damaged. This may void the warranty.
Opening up the machine could expose a person to a risk of fire or electrical shock. Visit our website or call
Good Vibrations 4 Life Inc. for advice on service and repair options.
Do not use the machine if you suspect a gas leak. If you suspect a gas leak, turn the machine off, vacate
the building and report the gas leak immediately.
To not immerse the machine in water or any other liquid.
Do not install the machine near a water source such as a spa or swimming pool where users may use or be
tempted to use the machine when wet.
Clean only with a damp cloth (see machine maintenance)
If the machine comes in contact with water, unplug the machine and do not plug it in again until it has
completely dried. In such a case, do not step in the water to unplug the machine. Turn the electrical
circuit off from a dry location.
