Goodmans MICRO 1930DVD User manual

10
11
MW Indoor Loop Aerial
A high-performance MW loop aerial provided with the receiver is
sufcient for good reception in most areas.
Connect the loop aerial's wires to the MW aerial terminals as
shown.
Place the aerial in a suitable location and rotate it until you
receive the best reception. Keep the aerial as far away as
possible from the entire system, speaker cords and the power cord,
to prevent unwanted noise.
To stand the aerial on a surface, x the claw to the slot.



How to connect
Press the lever, insert the stripped end of the cord, then release
the lever.
Make sure it is fastened securely by pulling the cord lightly. Make
sure only the bare, stripped wire is inserted in the socket and that no
plastic insulation is preventing contact between the aerial wire
and terminal.
Connecting Aerial (1)

10
11
FM Indoor Aerial
If you live reasonably close to a transmitter and want to use the
provided lead-type FM aerial, you will have to connect it direct to
the "FM 75." socket.
Fit the metal sleeve of the lead-type aerial over the core (center)
conductor of the "FM 75." socket, extend the lead and x it to a
window frame or wall with thumbtacks, or the like, where reception
is best.
FM Outdoor Aerial
In an area where FM signals are weak, it will be necessary to use
a 75-ohm unbalanced-type outdoor FM aerial using the optional
matching transformer, as shown. Generally, a 3-element aerial
will be sufcient; if you live in an area where the FM signals are
particularly weak, it may be necessary to use one with 5 or more
elements.
Connecting Aerial (2)
Lead-type FM Aerial(75)(provided
Outdoor FM Aerial(75)