gorilla sports 100822 User manual

MULTIFUNCTION SMITH MACHINE
100822
1
MMuullttiiffuunnccttiioonn SSmmiitthh
MMaacchhiinnee
100822

2
TABLE OF CONTENT
Page 3 - 4 ..................................................................................................................................
Page 6-10 ....................................................................................................................................................
Page 11-43 ....................................................................................................................................
Page 46-47 ..............................................................................................................................
Table of content
Safety Instructions
Technical data overview
Parts list
Assembling steps
Cleaning/Maintenance/Disposal
Warranty
Training information
Warm-Up/Stretching
Notes

3
IMPORTANT INFORMATION
AND SAFETY INSTRUCTIONS
General information
Please ensure that all persons using the device have read and understood the assembly and operating
instructions. The assembly and operating instructions must be regarded as part of the product and kept
in a safe place so that they can be referred to at any time if necessary. Ensure that the safety and main-
tenanceinstructions are followed exactly. Any use that deviates from these instructions may result in
damage tohealth, accidents or damage to the device, for which the manufacturer and distributor cannot
accept any liability.
Personal safety
Before starting to use the device, you should consult your family doctor to determine whether the
training is suitable for you from a health point of view. This applies especially to people who have a
hereditary predisposition to high blood pressure or heart disease, smoke, have high cholesterol
levels, are overweight and/or have not exercised regularly in the last year. If you are on medication
that affects your heart rate, medical advice is absolutely essential. Please also note that excessive
exercise can seriously jeopardize your health. If you experience any signs of weakness, nausea,
dizziness, pain, shortness of breath or other abnormal symptoms during training, please stop training
immediately and consult a doctor in case of emergency.
As a general rule, sports equipment is not a toy. Unless otherwise described, the equipment may only
be used by one person at a time for training. It may therefore only be used as intended and by
appropriately informed and instructed persons. Persons such as children, invalids, physically and
mentally impaired persons should only use the device in the presence of another person who can
provide assistance and guidance. Suitable measures should be taken to prevent unsupervised
children from using the device. It must be ensured that the user and other persons never move or
stand with any parts of their body in the area of moving parts.

4
IMPORTANT INFORMATION
AND SAFETY INSTRUCTIONS
Training clothes and shoes suitable for fitness training with the device must be worn. The clothing
must be such that it cannot get caught in the device during training due to its shape (e.g. length).
The training shoes should be chosen to match the training equipment, basically give the foot a firm
grip and have a non-slip sole.
Assembly
Check that all parts and tools listed in the parts list are present. Please keep in mind that some
parts may be pre-assembled. Keep children and animals away from the assembly area during
assembly. Tools, packaging materials (e.g. foil) or small parts may pose a risk of injury or
suffocation. Also make sure that you have enough space to move around during assembly.
Beforeusing the device for the first time and at regular intervals, check the tightness of all screws,
nuts and other connections to ensure the safe operating condition of the device.
Location
Set up the device in a flat, stable and dry place. Uneven surfaces can be compensated by adjustable
parts of the device, if available. To protect sensitive surfaces against pressure marks and dirt, we
recommend placing a floor protection mat underneath. Please also remove all objects within the
required training radius before starting training. Use outdoors or in rooms with increased humidity is
not permitted.

5
TECHNICAL DATA
OVERVIEW
2
Maximum load
300 kg
Maximum load
250 kg
Maximum load
180 kg
Maximum load
200 kg
Maximum load
100 kg
Maximum load
200 kg

6
PARTS LIST
3
01 02 03
04 05 06
07 08 09
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24 70
PART PHOTOS

7
PARTS LIST
4
25 26 27
28 29 30
31 32 33
34 35 36
37 38 39
40 41 42
43 44 45
46 47 48
PART PHOTOS

8
PARTS LIST
6
49
50
51
52 53
1PCS2PCS2PCS1PCS1PCS

9
PARTS LIST
7
(54) Nylon Lock Nut M10 56pcs
(56) Washer ? 10.5* ? 20*1.5t 130pcs
(58) Hexagon Head Bolt M10*20 27 PCS
(55) Washer ? 8.5* ? 16*1.5t 4pcs
(57) Hexagon Head Bolt M8*15 4PCS
(60) Hexagon Head Bolt M10*45 23 PCS
100822(1/2)

10
PARTS LIST
8
(59)Hexagon Head Bolt M10*25 4PCS (69)Hexagon Head Bolt M10*30 3PCS (68)Hexagon Head Bolt M10*50 4PCS
(61)Hexagon Head Bolt M10*55 2PCS
(62)Hexagon Head Bolt M10*75 14PCS
(63)Hexagon Head Bolt M10*90 1PCS
(64)Hexagon Head Bolt M10*100 4PCS
Allen Wrench 4#/1PCS
Spanner 17#/19# 2PCS
Spanner 14#/17# 2PCS
100822(2/2)

11
ASSEMBLING STEPS
9
01
02
03
05
04
04
56
56
56
56
56
56
56
56
56
56
64
64
64
64
56
56
58
58
58
58
54
54
54
54
Assembly Instruction
Important: When assembling the equipment, use only those components and fasteners that are included
with the equipment. Please note. at least two or three adults are required to assemble this machine.
ASSEMBLY STEPS
STEP 1
PART LIST
№
NAME
QTY
№
NAME
QTY
01
Main frame Right
1
54
Locknut M10
4
02
Main frame Left
1
56
Washer φ10
12
03
Main frame bottom
connection tube
1 58 Hex. Bolt M10*20 4
04
Curved metal plate
2
64
Hex. Bolt
M10*100
4
05
Main frame top connection
tube
1
Please note, this machine
needs 3 persons to assemble.
Noted that all screws or bolts
can be preassembled, but not
fully tighteened till all parts is
well assembled.
1.

12
ASSEMBLING STEPS
10
06
23
22
56
56
56
56
56
56 56
56
54
54
54
54
62
62
62
62
STEP 2
PART LIST
№
NAME
QTY
№
NAME
QTY
06
Top side Chin up tube
1
54
Locknut M10
4
22
Roof side Pulley/ bracket set-L
1
56
Washer φ10
8
23 Roof side Pulley/ bracket set-R 1 62 Hex. Bolt M10*75 4
2.

11
56
56
58
58
07
STEP 3
PART LIST
№
NAME
QTY
№
NAME
QTY
07
Back bottom feet tube
1
56
Washer φ10 2
58
Hex. Bolt
M10*20
2
13
ASSEMBLING STEPS
3.

12
16
16
56
58
STEP 4
PART LIST
№
NAME
QTY
№
NAME
QTY
16
Weight plate Guide rod
2
56
Washer
φ10
1
58
Hex. Bolt M10*20 1
14
ASSEMBLING STEPS
4.

13
11
11
17
STEP 5
PART LIST
№
NAME
QTY
№
NAME
QTY
11
Rubber Pad
2
17
Weight plate slide carriage set
1
15
ASSEMBLING STEPS
5.

14
08
56
56
56
58
58
63
STEP 6
PART LIST
№
NAME
QTY
№
NAME
QTY
08 Back roof connection tube 1 63
Hex. Bolt
M10*90
1
56 Washer φ10 3
58 Hex. Bolt M10*20 2
16
ASSEMBLING STEPS
6.

15
11
11
11
11
11
11
12
13
14
14
15
09
09
10
10
STEP 7
PART LIST
№
NAME
QTY
№
NAME
QTY
09
Smith Guide rod
2
13
Smitch Safety hook Right
1
10 Fixed Sleeve 2 14 Heavy duty spring 2
11
Rubber Pad
6
15
Barbell bar with safety hooks
1
12
Smith Safety hook Left
1
Noted the direction
Noted the direction
Noted the direction
Noted the direction
direction
Noted the direction
direction
Noted the direction
direction
Noted the direction
direction
Please note, this step needs 2 person proceed simultaneously. Follow up
above photo for each part postion and well assemble.
17
ASSEMBLING STEPS
7.

16
STEP 8
PART LIST
№
NAME
QTY
№
NAME
QTY
Use No.67 Allen Wrench 4# to tighteen the screw
18
ASSEMBLING STEPS
8.

17
56
56
56
56
54
54
18
68
68
STEP 9
PART LIST
№
NAME
QTY
№
NAME
QTY
18
Back Pulley fixed bracket
1
68
Locknut
M10*50
2
54
Locknut
M10 2
56 Washer φ10 4
19
ASSEMBLING STEPS
9.

18
27
50
STEP 10
PART LIST
№
NAME
QTY
№
NAME
QTY
27 Assisted Weight plate 2
50
Cable wire #50
2
Assemble No. 27 Assisted Weight plate with No. 50 Cable wire set
as photo above. And tighteen it. Total is 2 sets.
20
ASSEMBLING STEPS
10.