Graco 1E47ZBA User manual

Graco PD285987B 9/14
OWNER'S MANUAL

•PLEASE SAVE OWNER’S
MANUAL FOR FUTURE USE.
•THIS PRODUCT REQUIRES
ADULT ASSEMBLY. Follow
assembly instructions
carefully. If you experience
any difficulties, please contact
the Customer Service
Department.
•TO PREVENT SERIOUS
INJURY OR DEATH FROM
INFANTS FALLING OR
BEING STRANGLED IN
STRAPS:
• Always secure infant in the
restraint system provided.
After fastening buckles,
adjust belts to get a snug fit
around your infant.
• Never leave infant
unattended in swing.
• Never carry swing with
infant in it.
• Never use on elevated
surface.
• Child's movement can slide
swing. Always place swing
on floor.
• Discontinue use of swing
when infant attempts to
climb out or reaches
25 pounds (11.3 kg).
•Keep swing seat fully
reclined until child is at least
4 months old AND can hold
up head without help.
Young infants have limited
head and neck control. If
seat is too upright, infant's
head can drop forward,
compress the airway, and
result in DEATH.
•STRANGULATION
HAZARD:
• Child can strangle in loose
restraint straps. NEVER
leave child in product when
straps are loose or undone.
• DO NOT place swing in any
location where there are
cords, such as window blind
cords, drapes, phone cords,
etc.
• Strings can cause
strangulation. DO NOT
place items with a string
around your child’s neck,
such as hood strings or
pacifier cords.
• DO NOT suspend strings
over the swing or attach
strings to toys.
Failure to follow these warnings and the
assembly instructions could result in serious
injury or death.

•DISCONTINUE USING
YOUR SWING should it
become damaged or broken.
•DO NOT place product near
water and moisture. Do not
use the product near possible
wet areas, such as a bathtub,
shower, wash basin, sink,
laundry tub, swimming pool,
wet basement, etc.
• DO NOT use the swing
without the seat cover.
•DO NOT use the AC adapter
if it has been exposed to
liquids, has been dropped, or
is damaged.
• Protect the power cord. Place
it so it is not walked on or
pinched by furniture or other
items.
•DO NOT use with an
extension cord.
• Use only power cord
provided.

Parts list
2X
Rear tube
This model may not include some features shown below. Check that
you have all the parts for this model BEFORE assembling your
product. If any parts are missing, call Customer Service.
No tools required.
ALL MODELS
Front tube

1
Frame Assembly
2X
Battery
Feet
Insert one of the swing feet
tubes into the battery housing
leg tube until the button clicks
into place as shown.
2Insert the other side of the
swing feet into the other
housing leg until the button
clicks into place as shown.
SNAP!
SNAP!

3
SNAP!
Insert the other feet into the rear
leg tubes until the button clicks
into place as shown.
Frame is assembled.
SNAP!

Attaching Swing Arms
1Turn seat over. Insert the
tube with the single bracket
with the buttons facing
toward the head end of seat
as shown.
Bracket
Button
Head end
of seat
2Push tube into mounts
until it snaps into place.
SNAP!
SNAP!
Head end of seat

4
3
Insert the tube with the
double brackets with the
buttons facing toward the head
end of seat as shown.
SNAP!
Button
Push tube into mounts until it
snaps into place.
SNAP!
Head end of seat
Bracket

5
Rotate brace and attach it to the
front tube. It will snap into place.
SNAP!

7
Fasten 2 straps to the tube with
the single bracket as shown.
6a
MAKE SURE straps go
in-between the tubes and not over
the tubes as shown 6a.
Wrap seat pad through the tubes
as shown.
6
Single Bracket
SNAP!