Graco 244641 User manual

309345H
EN
Instructions
Bulk Grease
Transfer Package
For transferring bulk grease to a dispense pump in a lubrication system. For professional
use only.
Model No. 244641, 3:1 Bulldog Ram
120 psi (0.8 MPa, 8.3 bar) Maximum Air Input Pressure
360 psi (2.5 MPa, 25 bar) Maximum Fluid Working Pressure
Model No. 244848, 3:1 Bulldog Sinker
120 psi (0.8 MPa, 8.3 bar) Maximum Air Input Pressure
360 psi (2.5 MPa, 25 bar) Maximum Fluid Working Pressure
Model No. 244905, 50:1 Fire-Ball®425 Ram
80 psi (0.6 MPa, 5.5 bar) Maximum Air Input Pressure
4000 psi (27.6 MPa, 276 bar) Maximum Fluid Working Pressure
Model No. 244906, 75:1 Fire-Ball®425 Ram
53 psi (0.4 MPa, 3.7 bar) Maximum Air Input Pressure
4000 psi (27.6 MPa, 276 bar) Maximum Fluid Working Pressure
Model No. 244642, 5:1 Dynastar®120 lb Drum
1000 psi (6.9 MPa, 69 bar) Maximum Hydraulic Input Pressure
5000 psi (34.5 MPa, 345 bar) Maximum Fluid Working Pressure
Model No. 244643, 5:1 Dynastar®400 lb Drum
1000 psi (6.9 MPa, 69 bar) Maximum Hydraulic Input Pressure
5000 psi (34.5 MPa, 345 bar) Maximum Fluid Working Pressure
Model No. 257589, 50:1 Fire-Ball®425 Ram
80 psi (0.6 MPa, 5.5 bar) Maximum Air Input Pressure
4000 psi (27.6 MPa, 276 bar) Maximum Fluid Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual. See
related manuals for Warnings and installation, operation
and service instructions and when necessary, consult
your system installer. Save all instructions.

2309345H
Installation
Model No. 244641, 3:1 Bulldog Ram*
(includes 1, 2, 4, 9, 10, 11, 12, 13)
Model No. 244848, 3:1 Bulldog Sinker*
(includes 1, 3, 8, 9, 10, 11, 12)
Model No. 244905, 50:1 Fire-Ball®425 Ram*
(includes 1, 2, 3, 9, 13, 14, 15, 16)
Model No. 244906, 75:1 Fire-Ball®425 Ram*
(includes 1, 2, 3, 9, 13, 14, 15, 16)
Model No. 244642, 5:1 Dynastar®120 lb
Drum
(includes 1, 5, 6, 7, 10, 11, 12)
Model No. 244643, 5:1 Dynastar®400 lb
Drum
(includes 1, 5, 6, 7, 10, 11, 12)
Model No. 257589, 50:1 Fire-Ball®425 Ram*
(includes 1, 2, 3, 13, 14, 15, 16)
*See instruction manual 3A0233 for assembly instructions.
1
8
14
2
9
4
3, 15
11 10
12
16
13

Parts
309345H 3
Parts
Ref
No. Part No. Description Qty.
1 205148 PUMP, 3:1 Bulldog, used on
models 244641 and 244848
1
205395 PUMP, 50:1 Fire-Ball 425, used
on models 244905, 257589
1
239730 PUMP, 75:1 Fire-Ball 425, used
on model 244906
1
224751 PUMP, 5:1 Dynastar, used on
model 244642
1
224752 PUMP, 5:1 Dynastar, used on
model 244643
1
2 257435 RAM, used on models 244641
and 257589
1
25R470 RAM, used on models 244905
and 244906
3 224266 KIT, inductor, used on models
244905, 244906, 257589
1
222404 KIT, inductor, used on model
244848
1
4 206537 CLAMP, drum, used on model
244641
1
5 236864 MANIFOLD, hydraulic fluid con-
trol, used on models 244642
and 244643
1
6 204574 COVER, drum, used on model
244642
1
200326 COVER, drum, used on model
244643
1
7 223700 PLATE, follow, used on model
244642
1
223701 PLATE, follow, used on model
244643
1
8 244845 REGULATOR, air, 3/4” (fbe),
used on model 244848
1
9 208610 HOSE, air, 3/4” ID; 3/4”
npt(mbe) x 6 ft, used on models
244641 and 244848
1
222076 KIT, hose and fitting, used on
models 244905 and 244906
1
10 247969 HOSE, fluid, 2” ID; 2” npt(mbe)
x 6 ft, used on models 244641
and 244848
1
215441 HOSE, fluid, 1/2” ID; 1/2”
npt(mbe) x 10 ft, used on
244642 and 244643
1
11 512213 VALVE, fluid shut off; 2”
npt(fbe), used on models
244641 and 244848
1
202869 VALVE, fluid shut off; 1/2”
npt(fbe), used on models
244642 and 244643
1
12 116470 ADAPTER, swivel, straight; 2”
npt(m) x 2” npsm(f), used on
models 24464 and 244848
1
156684 ADAPTER, swivel, straight; 1/2”
npt(m) x 1/2” npsm(f), used on
models 244642 and 244643
1
13 157785 SWIVEL, 3/4” npt, used on
models 244641, 244905,
244906, 257589
1
14 247337 PLATE, mounting, used on
models 244905, 244906 and
257589
1
15 247335 KIT, ram plate seal, used on
models 244905, 2449906 and
257589
1
16 107219 BUSHING, 1/2”(f) to 3/4”(m),
used on models 244905,
244906, 257589
1
Ref
No. Part No. Description Qty.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.

All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM309345
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2001, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision H, February 2020
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: [phone] or Toll Free: 1-800-533-9655, Fax: [phone]