Graco 244679 Operation manual

309353D
EN
Instructions - Parts List
Air-Operated Double
Diaphragm Bulk
Transfer Packages
For dispensing non-corrosive and non-abrasive oils and lubricants only. For professional
use only.
Not approved for use in European explosive atmosphere locations.
Model Number 244679, 1050 AODD Dual Inlet
120 psi (0.8 MPa, 8.3 bar) Maximum Air Working Pressure
120 psi (0.8 MPa, 8.3 bar) Maximum Fluid Working Pressure
Model Number 244680, 1050 AODD Single Inlet
120 psi (0.8 MPa, 8.3 bar) Maximum Air Working Pressure
120 psi (0.8 MPa, 8.3 bar) Maximum Fluid Working Pressure
Model Number 244681, 515 AODD Dual Inlet
100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
Model Number 244682, 716 AODD Single Inlet
100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
Related Manuals
Important Safety Instructions
For complete warnings refer to the Operating
and/or Repair manual for Husky® 1050A
UL-Listed Diaphragm Pumps, Husky 515
Air-Operated Dual Inlet Diaphragm Pump, or
Husky 716 Air-Operated Diaphragm Pump.
Manual in
English Description
313597 Husky 1050A UL-Listed Diaphragm Pumps
309204 Husky 515 Air-Operated Dual Inlet Diaphragm Pump
308573 Husky 716 Air-Operated Diaphragm Pump

Parts
2 309353D
Parts
✺Two Suction Kits (236054) are supplied with models 244679 and
244681
† Two Nipples (158555) are supplied with model 244679
‡Two Adapters (156589) are supplied with model 244679, and two
Adapters (160327) are supplied with model 244681.
Model 244681, install Thermal Relief Kit (9) and
bushing (15) at center fluid outlet port of pump.
1
Ref. Part Description Qty.
1 647016 PUMP, Husky 1050 AODD (Models
244679 and 244680.) See Related
Manuals. page 1.
1
243669 PUMP, Husky 515 AODD (Model 244681)
See Related Manuals, page 1.
1
241906 PUMP, Husky 716 AODD (Model 244682)
See Related Manuals, page 1.
1
2 244844 REGULATOR, air, 1/2 npt(fbe), includes
gauge (Models 244679 and 244680) See
Related Manuals, page 1.
1
110147 REGULATOR, air, 1/4 npt(fbe), includes
gauge (Models 244681 and 244682) See
Related Manuals, page 1)
1
3 115042 HOSE, fluid, 1 in. ID, 1 npt(mbe) x 6 ft.
(Models 244679 and 244680)
1
109105 HOSE, fluid, 3/4 in. ID, 3/4 npt(mbe) x6 ft.
(Models 244681 and 244682)
1
4 205418 HOSE, air, 1/2 in. ID, 1/2 npt(mbe) x 6 ft
(Models 244679 and 244680)
1
109125 HOSE, air, 1/4 in. ID, 1/4 npt(mbe) x 6 ft
(Models 244681 and 244682)
1
5 110225 VALVE, air shutoff, 1/2 npt(fbe) (Models
244679 and 244680)
1
110223 VALVE, air shutoff, 1/4 npt(fbe) (Models
244681 and 244682)
1
6 189233 BRACKET, wall mounting, (Models
244679 and 244680)
1
224835 BRACKET, wall mounting (Models
244681 and 244682)
1
7 685984 Manifold, dual inlet (Model 244679) 1
8✺236054 KIT, suction (see manual 308335) 1
9 238428 KIT, thermal relief (see form 406172) 1
10 156684 ADAPTER, swivel, straight, 1/2 npt(m) x
1/2 npsm(f) (Models 244679 and 244680)
1
156823 ADAPTER, swivel, straight, 1/4 npt(m) x
1/4 npsm(f) (Models 244681 and 244682)
1
11 158491 NIPPLE, 1/2 npt (Models 244679 and
244680)
1
156971 NIPPLE, 1/4 npt (Models 244681 and
244682)
1
12† 158555 NIPPLE, 1 npt x 3/4 npt (Models 244679
and 244680)
1
13‡ 156589 ADAPTER, swivel, 90o, 3/4 npt(f) x 3/4
npsm(f) (Models 244679 and 244680)
1
160327 ADAPTER, swivel, 90o, 3/4 npt(m) x 3/4
npsm(f) (Models 244680 and 244681)
1
14 160022 ADAPTER, swivel, straight, 1 npt(m) x 1
npsm(f) (Models 244679 and 244680)
1
157785 ADAPTER, swivel, straight, 3/4 npt(m) x
3/4 npsm(f) (Models 244681 and 244682)
1
15 100081 BUSHING, 1/2 npt(m) x 3/8 npt(f) (Model
244681)
1
Ref. Part Description Qty.

Recycling and Disposal
309353D 3
Recycling and Disposal
End of Product Life
At the end of the product’s useful life, dismantle and
recycle it in a responsible manner.
• Perform the Pressure Relief Procedure for your
pump manual
• Drain and dispose of fluids according to applicable
regulations. Refer to the material manufacturer’s
Safety Data Sheet.
• Deliver remaining product to a recycling facility.
Technical Specifications
The system maximum air and fluid working pressure ratings are on the cover. See the separate Technical
Data/Technical Specifications section in the pump and motor instruction manuals that came with your pump/motor.
California Proposition 65
Wetted parts
Pump See separate pump instruction manuals
Output fitting, hose, valve Steel, brass, rubber
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.

All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 309353
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2001, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision D, June 2022
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification
of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be
returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or
workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental
or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder,
or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered
into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu
que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés,
à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: [phone] or Toll Free: 1-800-533-9655, Fax: [phone]