Grandstream Networks BroadWorks BroadSoft GXW-400X User manual

Analog IP Gateway GXW-400x
Quick Installation Guide
SW version 1.0.0.17
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

www.grandstream.com
Grandstream Analog IP Gateway GXW-400x
Quick Installation Guide
SW version 1.0.0.17
WARNING: Please DO NOT power cycle the GXW-400x when LED lights are flashing during
system boot up or firmware upgrade. You may corruptfirmware images and cause the unit to
malfunction.
WARNING: use only the power adapter included in the GXW-400x package. Using an alternative
power adapter may permanently damage the unit.
Overview
The new GXW-400x series has a compact and quietdesign (no fans) and offers superb audio
quality, rich feature functionality, strong security protection, and good manageability. It is auto-
configurable, remotely manageable and scalable.
The GXW-400x features 4 or 8-port FXS interface for analog telephones,dual 10M/100Mbps
network ports with integrated router, PSTN life line in case of power failure, and an RS232 serial
port for administration. In addition, it supports 2 SIP account profiles, caller ID for various
countries/regions, T.38 fax, 1 or 2-stage dialing, flexible dialing plans, security protection
(SIPS/TLS), comprehensive voice codecs including G.711 (a/u-law), G.723.1, G.726, G.728,
G.729A/B/E and iLBC.
Package
Unpack and check all accessories. Equipment included in the package:
•one 12V universal power adapter
•one Ethernet cable
•one device unit
GXW- 400xv
Dis
p
la
y
F
X
S
p
ort
[e-mail] GXW-400x Quick InstallGuide, p. 2
Firmware 1.0.0.17 Updated: 11/2006
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

www.grandstream.com
APPLICATION Diagram
There are three scenarios where the GXW-400x series can be effectively used to enable any
business to leverage the benefits of VoIP and the Internet.
Scenario One:
GXW- 400x FXS Gateway Configuration
PBX Scenario, VoIP
Anywhere in the world
Scenario Two:
GXW- 400x FXS Gateway Configuration
No PBX Scenario, VoIP
INTERNET
CLOUD
PB
GXW FXS Series
4 or 8 Ports
PSTN
Analog
Lines
Trun Lin
FXS Trunks
Anywhere in the world
INTERNET
CLOUD
GXW FXS Series
4 or 8 Ports
PSTN
Analog
Lines
FXS Gateway acts as a ‘virtual office’,
connecting analog lines directly to the
gateway
[e-mail] GXW-400x Quick InstallGuide, p. 3
Firmware 1.0.0.17 Updated: 11/2006
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

www.grandstream.com
Scenario Three: -410x Scenario ations)
port on GXW-400x to your PC.
GXW-400x & GXW
(maintain toll-free calling between loc
ACCESSING THE WEB CONFIGURATION PAGES
1. Connect the Power to the GXW-4008 unit.
2. Connect an Ethernet cable between the LAN
3. Your PC will be assigned an IP address like 192.168.2.100
4. Launch web browser and type http://192.168.2.1 at Address of web browser. This
ou can logi
ONFIGURATION
will let you to connect to build-in web server of GXW-400x.
n using either admin or 123 as the password.Y
C
LAN/WAN
RJ-45 Ethernet
FXS
Ports
Power
Supply Console
Connection
Ports
GXW- 400x
PSTN
Line
Branch A - Boston, MA
Branch B – Denver, CO
6 employees
(PC
connection)
4 employees
I
In nt te er
r
n
ne et t
C
Cl lo ou ud dGXW 400x
GXW 410x
PSTN
P
PS ST TN N
Analog
Lines
FX0
GXW-410x can also
C
Cl lo ou ud d
directly connect to
the line-side of a
[e-mail] GXW-400x Quick Install Guide, p. 4
Firmware 1.0.0.17 Updated: 11/2006
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

www.grandstream.com
1. After you login, you will see six different tabs (Status, Basic Settings, Advanced Settings,
2. Proxy/Registrar information, click on Profile 1. Enter
3. t information, click on FXS ports.
Profile 1, Profile 2 and FXS Ports) on the top of the screen. By clicking on each tab, you
can open that page for configuration.
In order to enter your SIP Server/ SIP
the IP Address (or FQDN) of the Server under:-
SIP Server and/or Outbound Proxy.
Now, to enter the extensions or accoun
As requested, you will need to fill in the information for each extension.
FXS
Port SIP User ID Auth ID Authentication Name Password Profile
1 601 601 *** Ext 1 Profile1
2 602 602 *** Ext 2 Profile1
3 603 603 *** Ext 3 Profile1
4 604 604 *** Ext 4 Profile1
5 605 605 *** Ext 5 Profile1
6 606 606 *** Ext 6 Profile1
7 607 607 *** Ext 7 Profile1
8 608 608 *** Ext 8 Profile1
4. he ext s are configured, you are finished. C Update af
5. are successfully registered.
IMPORTANT Settings igure the following settings according to the local environment. NOTE:
Once t ension lick ter changing any
setting and then Reboot to let the changes take effect.
After reboot, check under Status page whether the extensions
You can then start using your Standard Phones connected to ports FXS1 to FXS8 to make
calls.
The end-user must conf
Most settings on the web configuration pages are set to the default values.
. NAT SettingsA
If you plan to keep the gateway within a private network behind a firewall, we recommend using
have, or look up a free public STUN
2. tings, so set this parameter to
STUN Server. Here are 3 settings that can be useful in such a scenario:-
1. STUN Server (under Advanced Settings webpage)
Enter a STUN Server IP (or FQDN) that you may
Server on the internet and enter it on this field. If using Public IP, keep this field blank.
Use Random Ports (under Advanced Settings webpage)
This is a tricky setting. It really depends on your network set
Yes or No, whichever works. If using a Public IP address, set this parameter to No.
[e-mail] GXW-400x Quick InstallGuide, p. 5
Firmware 1.0.0.17 Updated: 11/2006
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

www.grandstream.com
3. NAT Traversal (under the Profile webpages)
Set this to Yes when gateway is behind firewall on a private network.
. DT you will find DTMF Settings:
RFC2833)
hods based on your PBX system.
nge of voice codecs. Under Profile webpages, you can
e, follow these steps: ur TFTP or HTTP Server IP address (or
2. et it to Yes
B MF Methods
Under Profile pages,
•DTMF in-audio
•DTMF via RTP (
•DTMF via SIP INFO
Enable one or more DTMF met
eferred VOCODER (Codec)C. Pr
The GXW-400x supports a broad ra
choose your preferred order of different codecs: PCMU (or G711u), PCMA (or G711a),
G729A/B, G723, G726-32, iLBC, G728 and G729E.
RADED. FIRMWARE UPG
To upgrade your unit firmwar
1. Under Advanced Settings webpage, enter yo
FQDN) next to the “Firmware Upgrade: Upgrade Server” field.
Select via TFTP or HTTP accordingly.
3. If you plan to use Automatic Upgrade, s , otherwise No (this will make it check
efault factory settings is to follows these four (4) steps:
on the back panel of the gateway unit next to the power
for upgrade every time you reboot).
E. FACTORY RESET
The ONLY way to reset d
1. Unplug the Ethernet cable.
2. Locate a needle-sized hole
connection.
Insert a pin in t3. his hole, and press for about 7 seconds. settings.
ions, please email [email protected]
4. Take out the pin. All unit settings are restored to factory
For any quest OR call our technical support at our
Brookline or LA offices.
Grandstream Networks, Inc. Corporate Headquarters
[e-mail] GXW-400x Quick Install Guide, p. 6
Firmware 1.0.0.17 Updated: 11/2006
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

www.grandstream.com
www.grandstream.com
[email protected]
1297 Beacon Street
B
Tel:
andstream Networks, Inc. is an award-winning designer and manufacturer of next generation
rookline, MA 02446
+1 (617) 566 – 9300
Fax: [phone] – 1987
Gr
IP voice & video products for broadband networks. Our products are consistently recognized by
industry experts for their innovation, affordability and superior value. Grandstream’s products
deliver superb sound and picture quality, rich telephony features and are fully interoperable and
compatible with most service providers, IP-PBXs, Softswitches and PBXs. Grandstream
Networks is headquartered in Brookline, MA with offices in Los Angeles, Dallas and China. For
more information, please visit www.grandstream.com.
Dallas, TX Los Angeles, CA Shenzhen, China
ker Rd, Ste 102 urt 45 one 2828 W. Par
Plano, TX 75075
469-241-0260
1301 John Reed Co
City of Industry, CA 917
626-956-0260
Bldg #1 Industrial Z
Nan Shan Industrial Park
Shenzhen, China 518057
[e-mail] GXW-400x Quick Install Guide, p. 7
Firmware 1.0.0.17 Updated: 11/2006
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]