Grandstream Networks GDS3710 Quick start guide

Outdoors Indoors
Power Supply for GDS
DC 12V 1A minimum
12V
GND
Power Supply for
Electric Strike
DC 6-24V
GDS3710
Power Supply for GDS
V-
V+
V-
V+
IN1+
IN1-
GDS3710 Connection & Wiring Diagrams ---- “Fail Safe” Electric Strike, 3rd Party Power Supply
Door Lock Switch
COM2
NO2
NC2
IN2+
IN2-
“Fail Safe ” Model
Electric Strike
COM1
NO1
GND
to protect people:
The lock is released if power cuts off
Oponal
Oponal

GDS3710 Connection & Wiring Diagrams ---- “Fail Secure” Electric Strike, 3rd Party Power Supply
12V
GND
Power Supply for Both
GDS3710 and Electric Strike:
DC 12V 2ANote minimum.
GDS3710
V-
V+
IN1+
IN1- Door Lock Switch
COM2
NO2
NC2
IN2+
IN2-
“Fail Secure” Model
Electric Strike
COM1
NO1
GND
12V 1A at least for GDS3710
NOTE:
•The input voltage of Electric
Strike must be DC 12V in this
case.
•The total current of power
must refer to the max.
current of electric strike to
sum up.
•e.g.: striker need 500mA, the
total should be 1 + 0.5 =1.5A
minimum for the 3rd party DC
Power Supply.
Outdoors Indoors
to protect property:
The lock remains closed if power cuts off
Oponal
Oponal

POE
Power Supply for
Electric Strike
DC 6-24V
GDS3710
POE Switch
V-
V+
IN1+
IN1-
Door lock Switch
COM2
NO2
NC2
IN2+
IN2-
“Fail Safe” Model
Electric Strike
COM1
NO1
POE
Eth
Eth
Eth
Eth
Cat 5e/6 Ethernet Cable
Outdoors Indoors
GDS3710 Connection & Wiring Diagrams ---- “Fail Safe” Electric Strike, 3rd Party Power Supply + POE
Oponal
Oponal

POE
Power Supply for
Electric Strike
DC 6-24V
GDS3710
POE Switch
V-
V+
IN1+
IN1-
Door lock Switch
COM2
NO2
NC2
IN2+
IN2-
“ ecure” ModelFail S
Electric Strike
COM1
NO1
POE
Eth
Eth
Eth
Eth
Cat 5e/6 Ethernet Cable
Outdoors Indoors
GDS3710 Connection & Wiring Diagrams ---- “Fail Secure” Electric Strike, 3rd Party Power Supply + POE
Oponal
Oponal

12V
GND
V+
V-
Power Supply for Both
GDS3710 and Electric Strike:
DC 12V 2ANote minimum.
GDS3710
V-
V+
COM2
NO2
NC2
COM1
NO1 Lamp
110VAC
or
220VAC
Relay limit 125VAC/0.5A, 30VDC/2A
GDS3710 Connection & Wiring Diagrams ---- Inappropriate Electric Strike Connection
Outdoors Indoors

12V
GND
Power Supply for Both
GDS3710 and Electric Strike:
DC 12V 2ANote minimum.
GDS3710
V-
V+
COM2
NO2
NC2
COM1
NO1
High power
Device
V+
V-
V+ V-
NOCOM
110VAC or 220V AC
N
L
Low voltage DC power
Add relay for Isolaon protenon
GDS3710 Connection & Wiring Diagrams ---- Good Electric Strike &High Power DeviceConnection
Outdoors Indoors

12V
GND
Power Supply for Both
GDS3710 and Electric Strike:
DC 12V 2ANote minimum.
GDS3710
V-
V+
IN1+
IN1-
COM2
GND
GND
WG_D0_IN
WG_D1_IN
LED
BEEP
DC-/GND
WG-D0-OUT
WG-D1-OUT
LED
BEEP
5V DC+
GDS only powers
LED and Beep are output for GDS
Don't connect If RFID reader is output
GDS3710 Connection & Wiring Diagrams ---- Wiegand RFID Reader
Outdoors Indoors
NO2
NC2
DC V 12 RFID devices
DC5V RFID devices