Granite I-CART User manual

Revised: JULY 2017
75116-01
I-CART
INSTRUCTION MANUAL

2
CONTENTS
Specs......................................................................3
Parts Diagram ........................................................4
Assembly................................................................5
TOOLS NEEDED
• 7/16” Wrench
• Ratchet with 7/16” Socket
• Needle Nose Pliers
• Box Cutters / Utility Knife
WARRANTY
3 Year Limited Warranty. Carts, excluding any
finishes, casters and wheels are warranted for three
(3) years from date of original purchase. Casters
and wheels are warranted for 90 days from date of
original purchase. We will repair, without charge,
any defect due to faulty material or workmanship.
These warranties do not cover failures due to
abuse, misuse, improper installation, accidental
damage or when repairs or modifications have been
made or attempted to be made by anyone other
than Granite Industries. Any defective products
that meet warranty specifications and Granite
Industries approval, may be returned to the factory
to be repaired or replaced free of charge. (Granite
Industries will pay to ship replacement item(s) to the
customer; however the customer is responsible for
shipment of products to the factory.) This remedy
is the sole remedy in contact, tort or otherwise,
and Granite Industries is not liable for incidental,
consequential or special damages. These warranties
give you specific legal rights, and you may have
other rights which vary from state to state. Should
you have any questions, contact Granite Industries
(Proof of purchase may be required).
Customer Service
877-447-2648
M-F, 8am - 5pm EST
To view more products from
American Cart & Rack
scan the QR code with your phone
or visit AmericanCartAndRack.com

3
SPECS
Overall Dimensions: W: 51” D: 27” H: 46”
Weight: 66 lbs. Capacity: 3000 lbs.

4
ITEM NO QTY PART NO DESCRIPTION
1 1 MI-12-4815 Fork Hand Truck Body
2 2 MI-01-5829 Hand Grip
3 2 PI-06-0004 Fork
4 2 PI-01-0025 1” Round Cap
5 2 PI-06-0045 1/4” Hex Bolt (3/4” L) 7/16” Socket/Wrench
6 2 PI-01-0079 1/4” Lock Nut 7/16” Socket/Wrench
7 4 PI-01-0030 10” Steel Offset Hub Wheel
8 2 PI-01-0037 1-1/4” Cotter Pin
9 4 PI-05-0113 3/4” Washer
PARTS DIAGRAM

5
3
2
COMPONENTS
ITEM NO QTY DESCRIPTION
1 1 Fork Hand Truck Body
7 2 10” Steel Offset Hub Wheel
8 2 1-1/4” Cotter Pin
9 4 3/4” Washer
10 1 Axle Rod
11 2 10” Steel Center Hub Wheel
TOOLS
7/16” Socket/Wrench
After all 4 bolts are finger tightened, go
through and tighten them down with a
wrench. Repeat this for THREE of the four
casters.
STEP 1: FRONT WHEEL ASSEMBLY
1
Align a caster over the holes provided. Slide
a lock washer, then a 3/4” washer onto a
bolt and insert it through the caster and cart
body. Finger tighten all of the bolts
Install the locking mechanism onto the 4th
caster. Align the holes and install the bolts
like you did in step 1.
4
Once all 4 bolts are in place, tighten them
securely in place with a wrench.

NOTES:
6

NOTES:
7

8
GRANITE INDUSTRIES
595 EAST LUGBILL ROAD
877-447-2648
[email protected]