GRASS VALLEY 8925EMB-U User manual

Specifications Ordering Information
218925EMB-U SD/HD Unbalanced Audio Embedder
Key Features
Eight-channel (four stream) SD/HD digital•
audio embedder (multiplexer)
Four unbalanced AES inputs•
Accepts asynchronous PCM audio•
Supports Dolby E•
Three SD/HD SDI outputs with embedded•
audio
Sample rate conversion accepts 32 kHz,•
44.1 kHz, 48 kHz, or 96 kHz
Embeds 20 or 24 bits•
Fiber-ready option for receiving or•
transmitting over fiber
Applications
Embedding audio into an HD-SDI stream•
Embedding asynchronous PCM digital•
audio
Embedding audio channels and sending•
an HD-SDI signal over fiber
Suitable for use where existing embedded•
audio needs to be combined with
incoming embedded audio
Supported Frame Types
GeckoFlex with 8900NET (Net Card) for configuration
Power Rating
7.7 Watts – single slot
Video Inputs
SD/HD-SDI:
•Inputequalization:HDupto125m,SDupto330m
•Auto-sensing:yes
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50,
720p @ 59.94, 50, 480i @ 59.94, 576i @ 50,
1080p @ 23.98, 1080sF @ 23.98
Audio Inputs
AES: Four inputs
•Signaltype–unbalanced:AES-3id-2001
•Commonmoderange:N/A
•Samplingrate:32,44.1,48,or96kHz
•Resolution:20-or24-bit
•Inputreturnloss:>–25dB(100kHzto12MHz)
•Inputimpedance:75Ω
•Connectortype:BNC
Video Outputs
SD/HD-SDI: Four outputs
•Returnloss:>15dB,5to270MHz;>15dBtypical,
to 1.5 GHz
•Signallevel:SDI800mVp-p±10%
•Rise/falltime(20-80%):140pstypicalforHD,
640 ps typical for SD
Output jitter, low jitter applied:•
< 0.2 UI HD > 100 kHz
< 1.0 UI HD 10 Hz > 100 kHz
< 0.2 UI SD > 1 kHz
< 0.2 UI SD 10 Hz > 1 kHz
Optical: Single-mode (optional)
Electrical Length (delay)
Minimum SDI Video Delay Mode:
HD input: <19 µs, SD input: <13 µs
Minimum SDI Audio/Video Offset Mode:
HD input: <84 µs, SD input: <525 µs
PCM Audio with SRC (at 48 kHz):
HD input: 3.04 ms, SD input: 3.45 ms
Non-PCM audio or PCM with SRC off:
HD input: 0.15 ms, SD input: 0.56 ms
Minimum Audio/Video Output Offset:
SD: 40 µs, HD: 62 µs
Embedding
Delete individual embedded audio group: Yes/no
Embedded audio stream: Silence, any incoming
group or any audio input
Output audio resolution: 20-, 24-bit, or auto as input
This module can be mounted in a GeckoFlex
frame but not in other 8900 series frames,
including Gecko-A or Gecko-V frames. As this
module has no card-edge controls, an 8900NET
(Net Card) Network Interface card is required to
configure this module.
8925EMB-U
SD/HD embedder, front and rear, four unbalanced
audio inputs, front and rear module set
SFP-13103G-M1TRX
Fiber transceiver. Low-power 1310 nm single-mode
optical transceiver
SFP-13103G-M1DTX
Dual fiber transmitter. Dual low-power 1310 nm single-
mode optical transmitter
SFP-13103G-M1DRX
Dual fiber receiver. Dual low-power 1310 nm single-
mode optical receiver
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular
The 8925EMB-U is a compact eight-channel
SD/HD digital audio embedder (multiplexer)
module. It provides three distributed SDI
outputs with embedded audio and one output
acting as an input reclocked loop-through. This
module is ideal for building dense SD/HD and
audio infrastructure for production and playout
applications.
The module automatically detects the audio
format, and Dolby E streams are also detected
and passed transparently. The AES inputs can
handle asynchronous audio and sampling rates
from 32 kHz to 96 kHz, which are converted
to synchronous 48 kHz embedded within the
video stream.
With its fiber-ready architecture, the
8925EMB-U can be configured to support up
to two fiber inputs and two fiber outputs. With
the fiber transmitter or transceiver option, it
can take video from copper or fiber, embed
audio, and transmit over fiber in one single slot.
The receiver option makes it ideal for receiving
incoming feeds from longer distances and
locally embedding audio.
8900UVF-R
J1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
Audio
Input
Audio
Input
SD/HD
SDI Out
SD/HD
SDI Out
Reclocked
Output
SD/HD
SDI In
Audio
Input
Audio
Input
SD/HD
SDI Out
SD/HD
SDI Out
Fiber In/Out
Connector
All parameters can be adjusted via standard
HTML Web browsers or via the Newton Control
Panel. In addition NetConfig and NetCentral
can be used for remote configuration and
signal health monitoring.
Bypass
Bypass
Sample Rate
Converter
3X SD/HD
SDI Out
SD/HD
Reclocked
SDI Out
SD/HD
SDI In
Equalizer and
Reclocker
Delay
Block
Only one fiber
option may be
selected
Fiber TX
Fiber TX
Fiber TX
Fiber RX
Fiber RX
Fiber RX
SD/HD
Optical In
2X SD/HD
Optical In
SD/HD
Optical Out
2X SD/HD
Optical Out
Option Option
Option
MUX
4X
AES
In