GRASS VALLEY T2 User manual

15 October, 2009
User Manual — Remote Control —
T2
INTELLIGENT DIGITAL DISK RECORDER

2T2 ― User Manual ― Remote Control ―
Cautions
(1) It is prohibited to copy a part or all of this product without prior permission.
(2) Thecontentsorspecicationsofthisproductmaybechangedwithoutprior
notice.
(3) We have prepared the contents of this product to the best of our ability;
however if you have any questions about the contents, or if there are any errors
ormissingitems,pleasecontactGrassValley.
(4) Howeverwedonottakeanyresponsibilityformalfunctionsarisingfromuse,
irrespective of the points outlined in (3).
(5) Irrespectiveofwhetheritwasduetoausageerror,GrassValleytakesno
responsibilityforextraordinary,incidentalorderivativeclaims,includingthose
forlostearningsgeneratedbytheapplicationofthisproduct.
(6) Itisprohibitedtoanalyze,reverseengineer,decompileordisassembleanyof
theitemsincludedwiththisproduct,includingthesoware,hardwareand
manual.
(7) MicrosoandWindowsareregisteredtrademarksoftheMicroso
Corporation, USA.
(8) DVCPROHDisthetrademarkofthePanasonicCorporation.
(9) HDVandHDVlogosarethetrademarksofSonyCorporationandVictor
CompanyofJapan,Limited(JVC).
(10) Otherproductnamesorrelatedbrandnamesaretrademarksorregistered
trademarks of their respective companies.
About this manual
The screens used as examples in this manual are those of the development•
stage,sotheymayvaryfromthoseinthenalproduct.
If there are any variations between the explanation in this manual and the•
actualapplicationmethod,priorityisgiventotheactualapplicationmethod.
Thismanualiswrienforpeoplewhohaveabasicknowledgeofhowtousea•
computer. If there are no special instructions, perform the same operation as a
normal computer operation.
In this manual, the system of the T2 is called "Workstation".•

3T2 ― User Manual ― Remote Control ―
Warning
Health precautions•
Inrarecases,ashinglightsorstimulationfromthebrightlightofacomputer
displayorTVmonitormaytriggertemporaryepilepticseizuresorloss
of consciousness. It is believed that even individuals whom have never
experienced such symptoms may be susceptible. If you or close relatives have
experiencedanyofthesesymptoms,consultadoctorbeforeusingthisproduct.
T2
User Manual – Remote Control –
October 15, 2009
Copyright © 2009 Thomson
All rights reserved.

4T2 ― User Manual ― Remote Control ―

T2 ― User Manual ― Remote Control ― 5
Remote Control
Overview
WiththeremotecontrolsoftheT2,thefollowingcontrolsandactionsare
available.
Asadevice,T2receivescommandsinputviatheREMOTERS422port•
on the T2 rear panel.
T2 controls external devices with the commands output via the•
REMOTERS422portontheT2rearpanel.
Asadevice,T2receivescommandsinputviaEthernet.•
T2controlsexternaldeviceswithcommandsoutputviaEthernet.•
T2supportsBVWprotocolpartially(RS422only).•
T2supportsAMPprotocolpartially(Ethernetonly).•
AccordingtotheGPIinput,thecorrespondingactionsareperformed.•
AccordingtothePlaylist>Eventseings,thecorrespondingGPI•
triggersareoutput.
Functions
1 R1 - VTR mode
Asacontroller(master),T2controlstheexternaldevice(VTR).•
When"In-OutRec"isexecuted,T2controlstheVTRsoastocapture•
therangebetweenthespeciedtimecodes.
2 P1/P2 – Remote mode
As a device (slave), T2 receives the commands sent by external controllers.
Section 1

T2 ― User Manual ― Remote Control ― 6
Section 1 ―
Remote Control
2-1 BVW
BVW commands
COMMAND RETURN
00 11 DEVICE TYPE REQUEST 12 11 DEVICE TYPE RETURN
20 01 PLAY
20 04 STANDBY OFF
20 05 STANDBY ON
20 10 FAST FWD
2X 11 JOG FWD
2X 12 VAR FWD
2X 13 SHUTTLE FWD
2X 20 REWIND
2X 21 JOG REV
2X 22 VAR REV
2X 23 SHUTTLE REV
24 31 CUE UP WITH DATA
20 54 ANTI-CLOG TIMER DISABLE
20 55 ANTI-CLOG TIMER ENABLE
44 00 TIMER-1 PRESET
40 08 TIMER-1 RESET
41 36 TIMER MODE SELECT
61 0C CURRENT TIME SENSE
74 00 TIMER-1 DATA
74 04 LTC TIME DATA
78 04 LTC TIME & UB DATA
74 05 LTC UB DATA
74 06 VITC TIME DATA
78 06 VITC TIME & UB DATA
74 07 VITC UB DATA
70 0D REQUEST TIME MISSING
61 20 STATUS SENSE 7X 20 STATUS DATA
60 2E COMMAND SPEED SENSE 71 2E COMMAND SPEED DATA
60 36 TIMER MODE SENSE 71 36 TIMER MODE DATA
Thesymbolsinthetableindicatethefollowing:
1) Commands marked with areavailableforexecutionwhentheT2isperformingarelevant
operation.IfavalueislistedintheRETURNcolumn,"RETURN+DATA"isreturned.Ifthecolumn
is empty, "10 01 ACK" is returned.
2) Commands marked with return"ACK"or"STATUS"as"RETURN",butdonotexecutetheactual
operation.
3) Start Delay value = 0F

T2 ― User Manual ― Remote Control ― 7
Functions
2-2 AMP
AMP commands
COMMAND
20.00 Stop
20.01 Play
20.10 Fast Forward
21.13 Shuttle Forward <Only Pause(0x) is supported>
24.11 Jog Forward
20.20 Rewind
24.21 Jog Reverse
22.22 Variable Reverse <Only reverse playback (-1x) is supported>
4A.14 In Preset <Loading only one Clip (Playlist) is supported>
4A.15 Out Preset <Only returns "ACK" without executing the actual operation>
40.41 Auto Mode On <Only returns "ACK" without executing the actual operation>
41.42 Set Loop Playback Mode
61.0C Current Time Sense
61.20 Status Sense
A0.16 ID Loaded Request
A2.09 Get Thumbnail
A2.0E Set Working Folder
A0.0F Get Working Folder
A2.14 List First ID
A1.15 List Next ID
A2.17 ID Duration Request
A2.25 ID Start Time Request
A0.2A List First Folder
A0.2B List Next Folder

T2 ― User Manual ― Remote Control ― 8
Section 1 ―
Remote Control
Using AMP commands
BeforeusingtheAMPcommands,makesurethatthenetworkseings
have been established as below.
* The procedures in the Workstation mode are explained here.
1 Click the ConfigbuonontheT2,chooseGeneral>Network1/2 to open
theseingdialog,andsettheIPaddressoftheT2.
2 Click the ConfigbuonontheT2,chooseR1>Timecode & Remote to
opentheseingdialog,andsettheIPaddressoftheconnecteddevice.

T2 ― User Manual ― Remote Control ― 9
Functions
3 GPI input
ViatheGPIinputport(6pins),T2canbecontrolled.•
Inputseingscanbespeciedontheseingdialog,displayedby
pressingtheConfigbuonandchoosingGPI.
* The procedures in the Workstation mode are explained here.
Available options on GPI Input settings
* See the "T2 User Manual – Workstation mode –" for details.
Triggerchannel(R1,P1,P2):Multiplechannelscanbesimultaneously•
chosen
TriggerAction•
play•
stop•
record•
rewind•
•
cue start/end•
eject•
preview•
cue next/prev event•
VARplayback•

T2 ― User Manual ― Remote Control ― 10
Section 1 ―
Remote Control
Active•
High•
Low•
*Iftheoperationcorrespondingtotheinputtriggercannotbeexecuted,
nothinghappens.
*RegardlessoftheoperationmodeorlockstatusoftheGUI,GPIinputs
can be received.
4 GPI output
ViatheGPIoutputport(6pins),triggersareoutputaccordingtothe•
T2 operation.
OutputPinseingscanbespeciedontheseingdialog,displayed
bypressingtheConfigbuonandchoosingGPI,whileoutputTrigger
seingscanbespeciedontheseingdialog,displayedbyright-
clickingonaneventlist,andchoosingProperties>GPI.
* The procedures in the Workstation mode are explained here.
*GPIoutputcanbeoutputonlywhenissuedfromcontentloadedon
theP1channel.

T2 ― User Manual ― Remote Control ― 11
Functions
Available options on GPI Output settings
* See the "T2 User Manual –Workstation mode –" for details.
Name•
Active•
High•
Low•
GPI tab

T2 ― User Manual ― Remote Control ― 12
Section 1 ―
Remote Control
GPI I/O connector pinouts
9 15
1 8
Pin Signal Pin Signal
1 Output 1 9 Input 1
2 Output 2 10 Input 2
3 Output 3 11 Input 3
4 Output 4 12 Input 4
5 Output 5 13 Input 5
6 Output 6 14 Input 6
7 NC 15 NC
8 Common Ground SHELL Common Ground
Note T2 iDDR software supports outputs 1-6 and inputs 1-6 only. Pin 7 and Pin 15
are not used.
RS422 I/O connector pinouts
5 1
9 6
R1
D-Sub 9pin
P1/P2
D-Sub 9pin
Pin Signal Pin Signal
1 GND 1 GND
2 RECEIVE- 2 TRANSMIT-
3 TRANSMIT+ 3 RECEIVE+
4 GND 4 GND
5 NC 5 NC
6 GND 6 GND
7 RECEIVE+ 7 TRANSMIT+
8 TRANSMIT- 8 RECEIVE-
9 GND 9 GND
F243910132