GreatCall Jitterbug Flip User manual

Quick-Start Guide
An easy-to-use guide for your
easy-to-use phone.
jitterbug®
jitterbug®
jitterbug®

Welcome to the GreatCall Family!
Thank you for choosing the Jitterbug Flip. This Quick-Start Guide will help you
get started with your new cell phone through the activation and set up process.
For everything you need to know about your Jitterbug Flip, please reference
your User Guide, contained in this package. If you have any questions or need
assistance, our award-winning, 100% U.S.-based customer service team
stands ready to assist you.
Best Regards,
Your friends at GreatCall

Quick-Start Guide
II

Quick-Start Guide
1
Key Items in Your Jitterbug Box
i INFO
The rechargeable battery has been pre-installed for your convenience.
Jitterbug Flip
USB Cable Wall Charger
Charging Dock

Quick-Start Guide
2
Your Jitterbug Flip
Headset Jack
Outside Display
Flash / Flashlight
Camera
Indicator Light
USB Connector
Dock Connector

Quick-Start Guide
3
YES Button
Inside Display
Earpiece Speaker
Microphone
Up/Down Button
On/Off ButtonSpeakerphone Button
NO Button
5Star Button
Keypad

Quick-Start Guide
4
Volume Button
External Speaker
Flashlight Button
Battery Cover
Battery Cover Release

Quick-Start Guide
5
Activating Your Jitterbug
Depending where your Jitterbug was purchased, your phone may already be
activated. The following three easy steps will guide you in powering on your
phone for the rst time.
IMPORTANT!
Please do not turn on your phone until instructed to do so. If you turn it on
prior to setting up your account, the device may fail to activate. If the device
fails to activate, power off and start with STEP 1.

Quick-Start Guide
6
Determine where your phone was purchased.
STEP 1
• If you purchased your Jitterbug from GreatCall or rstSTREET, your phone
is already activated and you may skip to STEP 3.
OR
• If you purchased your Jitterbug from Amazon, Best Buy, Fry’s Electronics,
Rite-Aid, Sears, or Walmart, your phone is not yet activated and you will
need to continue to STEP 2.

Quick-Start Guide
7
Go online or call to activate your account.
STEP 2
• If you are new to GreatCall, go online at GreatCall.com/Activate to activate
your account. You will be asked to enter in your Jitterbug Serial Number
which can be found on the included Activation Card or on the side of the
retail box. If you do not have Internet access, you can call our Activation
Line at [phone].
OR
• If your Jitterbug is already activated and you have questions about
your phone or service, please call our customer service agents at
[phone].

Quick-Start Guide
8
Turn on your Jitterbug to complete set up.
STEP 3
Press the On/Off Button ( ) and your phone
will automatically complete the set up process.
This process may take a few minutes and you
may notice the phone restart a few times. Once
complete, you will see a screen “Phone was set
up successfully!”
You’re now ready to enjoy the benets of your easy-to-use Jitterbug phone.

Quick-Start Guide
9
Charging the Battery
We’ve included a Charging Dock to make it easy for you to always have your
Jitterbug fully charged and ready to go.
Charging Using the Charging Dock
1. Plug the smaller end of the USB Cable into the back of the Charging Dock.
2. Plug the larger end of the USB Cable into the Wall Charger.
3. Plug the Wall Charger into a standard wall outlet (110/220 VAC).
4. Place the Jitterbug into the Charging Dock as illustrated.
Your Jitterbug is fully charged when you see “Charging Complete” on the
Outside Display.

Quick-Start Guide
10

Quick-Start Guide
11
Making and Answering Phone Calls
Making a Phone Call
You can dial a phone number directly from almost every screen on your
Jitterbug.
1. When you open your Jitterbug, you will hear a dial tone indicating that
service is available. If service is not available, there will be no dial tone and
you will see “No Service” on the Inside Display.
2. Dial the full ten-digit phone number using the Keypad. You may be required
to dial the number “1” rst before placing a call in some areas.
3. Press the YES Button ( ) to place the call.
i INFO
If you make a mistake while dialing, press the NO Button ( ) to back up
and delete the last number.

Quick-Start Guide
12
Answering a Call When Your Jitterbug is Closed
1. Open your Jitterbug when you hear it ring. The ring tone will stop when the
phone is opened.
2. A “Connected” message will appear on the Inside Display and the caller’s
voice can be heard through the Earpiece Speaker.
3. To end the call, press the NO Button ( ) or close your Jitterbug.
Answering a Call When Your Jitterbug is Open
1. When the “ANSWER?” question appears in the Action Line at the bottom
of the Inside Display, press the YES Button ( ) to connect.
2. A “Connected” message will appear on the Inside Display and the caller’s
voice can be heard through the Earpiece Speaker.
3. To end the call, press the NO Button ( ) or close your Jitterbug.

Quick-Start Guide
13
The 5Star Button
If you have a Health & Safety Package, press the
red 5Star Button in an uncertain or unsafe situation
to be connected to a highly-trained 5Star Agent.
The Agent will assess your situation, conrm your
location using GPS and connect you to emergency
services if you need it.
NO TO HANG UP
Calling...
5Star

Copyright ©2016 GreatCall, Inc. GreatCall®, 5Star®, and GreatCall Link™ are trademarks of GreatCall, Inc. registered and/or pending in the United States and other countries. ©2016 ALCATEL is a trademark of Alcatel-
Lucent used under license by TCL Communication LTD. Screen images simulated. Appearance of device may vary. Other marks are property of their respective owners and may be trademarks.

www.greatcall.com
JB6-QSG-V2