Grizzly G0653 Instruction Manual

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3Model G0653
MACHINE DATA
SHEET
Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]
MODEL G0653 17" X 40" CNC LATHE WITH CENTROID
CONTROLS
Product Dimensions:
Weight............................................................................................................................................................ 3960 lbs.
Length/Width/Height........................................................................................................................98 x 78 x 72-1/2 in
Foot Print (Length/Width).................................................................................................................86-1/2 x 22-1/2 in.
Shipping Dimensions:
Type..............................................................................................................................................................Wood Slat
Content............................................................................................................................................................Machine
Weight............................................................................................................................................................ 4620 lbs.
Length/Width/Height........................................................................................................................... 106 x 67 x 86 in.
Electrical:
Switch........................................................................................................ Magnetic with Thermal Overload Protector
Switch Voltage........................................................................................................................................................ 220
Minimum Circuit Size...................................................................................................................220V/40A, 440V/20A
Motors:
Main
Type...........................................................................................................................................TEFC Induction
Horsepower.....................................................................................................................................................10
Voltage...................................................................................................................................................220/440
Prewired........................................................................................................................................................220
Phase.........................................................................................................................................................Three
Amps..........................................................................................................................................................24/12
Speed..........................................................................................................................................................1725
Cycle...............................................................................................................................................................60
Number Of Speeds........................................................................................................................................... 1
Power Transfer .......................................................................................................................Belt & Gear Drive
Bearings........................................................................................................Shielded and Permanently Sealed
Gear Box
Type...........................................................................................................................................ASEC Induction
Horsepower....................................................................................................................................................1-4
Voltage...................................................................................................................................................220/440
Prewired........................................................................................................................................................220
Phase.........................................................................................................................................................Three
Amps........................................................................................................................................................1.6/0.8
Speed............................................................................................................................................................875
Cycle...............................................................................................................................................................60
Number Of Speeds........................................................................................................................................... 1
Power Transfer .......................................................................................................................Belt & Gear Drive
Bearings........................................................................................................Shielded and Permanently Sealed

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3Model G0653
Coolant
Type................................................................................................................................................DV Induction
Horsepower....................................................................................................................................................1/8
Voltage...................................................................................................................................................220/440
Prewired........................................................................................................................................................220
Phase.........................................................................................................................................................Three
Amps....................................................................................................................................................0.32/0.22
Speed..........................................................................................................................................................3450
Cycle...............................................................................................................................................................60
Number Of Speeds........................................................................................................................................... 1
Power Transfer ................................................................................................................................Direct Drive
Bearings........................................................................................................Shielded and Permanently Sealed
Main Specifications:
Operation Info
Swing Over Bed......................................................................................................................................... 17 in.
Dist Between Centers.................................................................................................................................40 in.
Swing Over Cross Slide.........................................................................................................................7-1/2 in.
Swing Over Saddle.....................................................................................................................................17 in.
Swing Over Gap.........................................................................................................................................26 in.
Max Tool Bit Size......................................................................................................................................... 1 in.
Headstock Info
Spindle Bore...........................................................................................................................................3-3/8 in.
Spindle Taper.............................................................................................................................................MT#7
No Of Spindle Speeds.......................................................................................................Variable in 3 Ranges
Range Of Spindle Speeds........................................................................................................... 10-2000 RPM
Spindle Type................................................................................................................................ D1-8 Camlock
Spindle Bearings.........................................................................................................................Tapered Roller
Tailstock Info
Tailstock Travel......................................................................................................................................5-5/8 in.
Tailstock Taper.......................................................................................................................................... MT#5
Tailstock Barrel Diameter.............................................................................................................................3 in.
Dimensions
Bed Width...................................................................................................................................................18 in.
Leadscrew TPI.............................................................................................................................................2.54
Leadscrew Length................................................................................................................................26-1/2 in.
Steady Rest Capacity.............................................................................................................................4-1/2 in.
Leadscrew Diameter................................................................................................................................40 mm
Floor To Center Height.........................................................................................................................43-1/2 in.
Construction
Base Construction................................................................................................................................Cast Iron
Headstock Construction....................................................................................................................... Cast Iron
Headstock Gears Construction.......................................................................................Flame Hardened Steel
Bed Construction..................................................................................................Induction Hardened Cast Iron
Paint.....................................................................................................................................................Urethane
Other Specifications:
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location .......................................................................Machine ID Label on Front of Operator Guard

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 3 OF 3Model G0653
Features:
Centroid T400 Contoller
Sliding Operator Guard w/Window & Cross/Longitudinal Controls
Hardened and Precision Ground Bed
High Alloy Gears Hardened, Ground and Honed
Three-Bearing Spindle Support w/Pressurized Lubrication
Automatic Homing Feature
Pull-Out Chip Tray
Automatic Gear Change
M-Code Controlled Coolant System
Chuck Guard
Built-In Fluorescent Work Lamp