Grizzly T21347 User manual
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
MODEL T21347
18 GAUGE 2" NAILER KIT
OWNER'S MANUAL
Safety Instructions For Pneumatic Tools
1. KEEP ALL SAFETY DEVICES IN
PLACE
2. REMOVE ADJUSTING KEYS AND
WRENCHES
3. KEEP WORK AREA CLEAN
4. DO NOT USE IN DANGEROUS
ENVIRONMENT
5. KEEP CHILDREN AND VISITORS
AWAY.
6. MAKE WORKSHOP CHILD
PROOF
7. DO NOT FORCE TOOL.
8. USE THE RIGHT TOOL.
9. DO NOT USE UNDER THE
INFLUENCE OF DRUGS OR
ALCOHOL.
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.
This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
SAFETY
NOTICE
10. USE PROPER AIR HOSE
11. WEAR PROPER APPAREL.
12. ALWAYS USE ANSI APPROVED
SAFETY GLASSES.
13. WEAR APPROVED HEARING
PROTECTION.
14. SECURE WORK.
15. MAINTAIN TOOLS WITH CARE.
16. REDUCE THE RISK OF
UNINTENTIONAL STARTING.
17. DISCONNECT TOOLS
18. DO NOT OVERREACH.
19. USE THE RECOMMENDED
ACCESSORIES.
20. CHECK FOR DAMAGED PARTS
BEFORE USING.
21. NEVER LEAVE UNATTENDED
TOOL CONNECTED TO AIR.
22. NEVER ALLOW UNTRAINED
USERS TO USE THIS TOOL
WHILE UNSUPERVISED.
23. IF YOU ARE UNSURE OF THE
INTENDED OPERATION, STOP
USING THE TOOL.
Safety Instructions For Pneumatic Tools
Additional Safety Instructions for Nailers/
Staplers
1. HAND INJURIES:
2. COMBUSTIBLE GASES:
.
3. SAFE HANDLING:
4. MODIFICATIONS:
5. COMPRESSED AIR RATING:
6. HOSE USAGE:
7. OPERATING QUESTIONS:
8. CLEANING:
9. MAINTENANCE:
4. CHECK VALVE:
Operating this nailer can propel
objects into the air, causing imme-
diate eye damage. To protect your-
self, always wear American National
Standards Institute (ANSI) approved
safety glasses or goggles when oper-
ating this equipment. In addition, this
nailer discharges at up to 85-90 deci-
bels. To protect your hearing, always
wear ANSI approved ear protection
when operating this nailer.
Never point this nailer at yourself or
another person! Always pay attention
to the direction this nailer is pointed.
Use this tool with respect and caution
to lessen the possibility of operator or
bystander injury. Ignoring this warning
may result in serious personal injury.
Nailer/stapler accidents routinely hap-
pen while moving the gun to another
location, such as up ladders, to anoth-
er room, or even another job site.
Always disconnect the gun immedi-
ately after use and never transport the
gun while connected to the air—even
if the air compressor is disconnected
from its power source!
No list of safety guidelines can be
complete. Every shop environment is
different. Always consider safety first,
as it applies to your individual working
conditions. Use this and other tools
with caution and respect. Failure to
do so could result in serious personal
injury, damage to equipment or poor
work results.
Read the manual before operation.
Become familiar with this nailer, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.
INTRODUCTION
Foreword Contact Info
Specifications
SET UP
Unpacking
please immediately call Customer
Service at (570) 546-9663for advice.
Otherwise, filing a freight claim
can be difficult.
Inventory
Model T21347 Inventory (Figure 1)
A.
B.
C.
D.
E.
F.
Figure 1.
Compressed Air
System
DO NOT exceed
the maximum operating pressure for
your model.
Figure 2
Quick
Connector
Quick
Coupler
Air Hose Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2.
Exceeding the maximum permissible
operating pressure may cause the
nailer to explode, blowing metal frag-
ments in all directions. To protect
yourself from serious personal injury,
DO NOT allow your air compressor to
exceed the recommended pressure
when connected to this nailer!
Safety Nose
Mechanism
1.
2
3.
4.
5.Without pressing the trigger
does fire
The safety mechanism is a mechani-
cal device that can fail. Never rely on
this mechanism as an excuse to point
the nailer at yourself or any bystand-
ers. Serious injury may occur.
OPERATIONS
Loading
To load your nailer:
1.
2.
Figure 3,
3.
Figure 4
Operating
If you have not read the safety instruc-
tions in this manual, do not operate the
nailer.
To operate your nailer:
1.
2.
4.
5.
Figure 4.
Figure 3.
To adjust the depth:
1.
2. Figure 6
5.
Adjusting
Depth
3.
4.
Figure 5.
Figure 5.
Adjusting Depth
3.
Figure 6.
4.
Figure 7
Clearing Jammed
Nails
5.
6.
7.
To clear a jammed nail from the dis-
charge area:
1.
2.
3.
Figure 7.
Replacing Pistons &
O-Rings
4.
5.
6.
7.
8.
DO NOT force the piston into
the cylinder!
9.
10.
To replace a piston:
1.
2.
3.
Always disconnect air from nailer
whenever servicing! During mainte-
nance, a nailer connected to air may
fire accidentally, causing serious
personal injury!
CLEANING & LUBRICATION
Cleaning
Lubricating
Figure 8.
Never use gasoline or other flamma-
ble liquids to clean this tool. Vapors
in the tool may ignite, causing the
tool to explode. Ignoring this warning
may lead to serious personal injury or
even death!
Figure 8
TROUBLESHOOTING
Symptom Possible Cause Solution
Main Breakdown
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27 28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47 48
49
50
51
52
53
54
55
56
57
58 59 60 61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78 79
80
81
82
83
84
85
86
88
89
90
12
12
1
7
25
87
Piston & O-Ring
Repair Kit
(Not Included)
Main Parts List
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT21347001 STEEL BALL 2.5MM 46 PSB38M CAP SCREW M5-.8 X 25
2 PT21347002 COMPRESSION SPRING 47 PT21347047 SHAFT RETAINER
3 PT21347003 AIR DEFLECTOR BOLT 48 PT21347048 SHAFT
4 PT21347004 AIR DEFLECTOR SPRING 49 PSB16M CAP SCREW M4-.7 X 16
5 PT21347005 AIR DEFLECTOR 50 PT21347050 LATCH
6 PSB15M CAP SCREW M5-.8 X 20 51 PT21347051 DRIVER PLATE
7 PLW01M LOCK WASHER 5MM 52 PEC16M E-CLIP 2.5MM
8 PT21347008 CYLINDER COVER 53 PT21347053 SPECIAL PIN
9 PT21347009 SEALING WASHER 54 PT21347054 NOSE
10 PORP018 O-RING 17.8 X 2.4 P18 55 PT21347055 NOSE TIP
11 PT21347011 VALVE SPRING 56 PT21347056 NAIL PLATE
12 PORS034 O-RING 33.5 X 2.0 S34 57 PT21347057 SLIDING MAGAZINE
13 PT21347013 HEAD VALVE PISTON 58 PSS22M SET SCREW M4-.7 X 12
14 PT21347014 GASKET 59 PT21347059 PUSHER
15 PT21347015 PISTON SEALING RING 60 PT21347060 PUSHER PIN
16 PT21347016 O-RING 23 X 5.2 61 PT21347061 COMPRESSION SPRING
17 PT21347017 MAIN PISTON 62 PSB17M CAP SCREW M4-.7 X 10
18 POR0042 O-RING 41.6 X 3 63 PT21347063 MAGAZINE END BRACKET
19 PT21347019 COLLAR 64 PT21347064 LATCH SPRING
20 PT21347020 CYLINDER 65 PRP42M ROLL PIN 3 X 20
21 PT21347021 BUMPER 66 PT21347066 LOCK LATCH
22 PT21347022 DRIVE GUIDE WASHER 67 PT21347067 LATCH END COVER
23 PT21347023 NAILER BODY 68 PSB18M CAP SCREW M4-.7 X 8
24 PT21347024 GUIDE SEAT 69 PT21347069 BRACKET
25 PRP55M ROLL PIN 3 X 27 70 PSB110M CAP SCREW M4-.7 X 6
26 PT21347026 ADJUSTMENT WASHER 71 PT21347071 FIXED MAGAZINE
27 PT21347027 COMPRESSION SPRING 72 PRP64M ROLL PIN 3 X 18
28 PT21347028 ADJUSTMENT SEAT 73 PT21347073 TRIGGER LOCK
29 PT21347029 PIN 1.5 X 8 74 PT21347074 TRIGGER
30 PT21347030 POSITIONING SPRING 75 PLN01M LOCK NUT M4-.7
31 PT21347031 DEPTH ADJUSTMENT WHEEL 76 PSB41M CAP SCREW M4-.7 X 14
32 PT21347032 DRIVER STEM 77 PT21347077 GRIP
33 PT21347033 SAFETY STEM 78 PORP038 O-RING 37.7 X 3.5 P38
34 PT21347034 SPECIAL WASHER 79 PT21347079 END CAP
35 PSB80M CAP SCREW M3-.5 X 8 80 PT21347080 AIR INLET VALVE
36 PORS008 O-RING 7.5 X 1.5 S8 81 PT21347081 AIR INLET VALVE CAP
37 PT21347037 VALVE CASE 82 PT21347082 CARRYING CASE
38 PT21347038 COMPRESSION SPRING 83 PT21347083 SAFETY GOGGLES
39 PH6332035 O-RING 1.9 X 1.1 84 PT21347084 OIL BOTTLE
40 PT21347040 TRIGGER PIN 85 PAW03M HEX WRENCH 3MM
41 PORP012 O-RING 11.8 X 2.4 P12 86 PAW04M HEX WRENCH 4MM
42 PT21347042 TRIGGER SEAT 87 PT21347087 PISTON & O-RING REPAIR KIT
43 PORP012 O-RING 11.8 X 2.4 P12 88 PT21347088 GRIZZLY.COM LABEL
44 PT21347044 COMPRESSION SPRING 89 PT21347089 TOOL ID LABEL
45 PT21347045 FIXED PLATE 90 PT21347090 WARNINGS LABEL
1 year
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail:
Web Site: http://www.grizzly.com
WARRANTY AND RETURNS
WARRANTY CARD
The following information is given on a voluntary basis. It will be used for marketing purposes to
help us develop better products and services. All information is strictly confidential.
1.
2.
3.
4.
5.
6.
7.
8.
9.
We never use names more than 3 times.
10.
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
FOLD ALONG DOTTED LINE
GRIZZLY INDUSTRIAL, INC.
P.O. BOX 2069
BELLINGHAM, WA 98227-2069
TAPE ALONG EDGES--PLEASE DO NOT STAPLE
Name________________________________
Street________________________________
City______________State______Zip_______
Send a Grizzly Catalog to a friend:
Place
Stamp
Here
Table of contents
Other Grizzly Nail Gun manuals
Grizzly
Grizzly H5571 User manual
Grizzly
Grizzly H6145 User manual
Grizzly
Grizzly H6144 Quick start guide
Grizzly
Grizzly G6049 User manual
Grizzly
Grizzly H6141 User manual
Grizzly
Grizzly G6048 User manual
Grizzly
Grizzly H5571 User manual
Grizzly
Grizzly H6146 User manual
Grizzly
Grizzly H6146 User manual
Grizzly
Grizzly T20644 User manual
Grizzly
Grizzly H8233 User manual
Grizzly
Grizzly H7665 Operating instructions
Grizzly
Grizzly H5527 User manual
Grizzly
Grizzly G6045 User manual
Grizzly
Grizzly G9248 User manual
Grizzly
Grizzly H5570 User manual
Grizzly
Grizzly H7664 Quick start guide
Grizzly
Grizzly G6048 User manual
Grizzly
Grizzly H8232 User manual
Grizzly
Grizzly H7679 User manual
Popular Nail Gun manuals by other brands
Craftsman
Craftsman CMP21PL instruction manual
Campbell Hausfeld
Campbell Hausfeld Brad Nailer CHN70200 Operating instructions and parts manual
Bostitch
Bostitch RN46 Operation and maintenance manual
Senco
Senco FN81T1 operating instructions
Senco
Senco SFN2 operating instructions
Hitachi
Hitachi NT65M2 - to 2-1 16 Gauge Finish Nailer parts list
Shinano
Shinano SI-4740 instruction manual
Max
Max SN890CH/34 Operating and maintenance manual
Metabo HPT
Metabo HPT NP 18DSALT Instruction and safety manual
Hitachi
Hitachi NT 65MA4 Instruction and safety Instruction and safety manual
Max
Max HN50 Operating and maintenance manual
Orion Tools
Orion Tools GSN40ST Safety manual
