Grizzly G1037Z Instruction Manual

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2Model G1037Z
MACHINE DATA
SHEET
Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]
MODEL G1037Z 13" PLANER/MOULDER
Product Dimensions:
Weight.............................................................................................................................................................. 217 lbs.
Length/Width/Height.................................................................................................................23-1/2 x 23 x 44-1/2 in.
Foot Print (Length/Width).................................................................................................................22-1/4 x 21-1/4 in.
Shipping Dimensions:
Type............................................................................................................................................................. Cardboard
Content............................................................................................................................................................Machine
Weight.............................................................................................................................................................. 240 lbs.
Length/Width/Height............................................................................................................................. 34 x 20 x 23 in.
Electrical:
Switch............................................................................................................................................ Push Button On/Off
Switch Voltage......................................................................................................................................................110V
Cord Length............................................................................................................................................................ 5 ft.
Cord Gauge....................................................................................................................................................14 gauge
Minimum Circuit Size........................................................................................................................................ 20 amp
Plug Included.......................................................................................................................................................... Yes
Motors:
Main
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower...........................................................................................................................................1-1/2 HP
Voltage.................................................................................................................................................110/220V
Prewired......................................................................................................................................................110V
Phase........................................................................................................................................................Single
Amps..........................................................................................................................................................18/9A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer .......................................................................................................................Twin V-Belt Drive
Bearings.......................................................................................................................Shielded and Lubricated
Main Specifications:
Operation Info
Max. Cut Width...........................................................................................................................................13 in.
Max. Cut Height............................................................................................................................................6 in.
Min. Stock Length......................................................................................................................................12 in.
Min. Stock Width....................................................................................................................................... 3/8 in.
Max. Stock Thickness.................................................................................................................................. 6 in.
No. Of Cuts Per Inch...............................................................................................................................52, 104
No. Of Cuts Per Minute.............................................................................................................................15000
Cutterhead Speed..............................................................................................................................5000 RPM
Planing Feed Rate..................................................................................................................................24 FPM
Moulding Feed Rate...............................................................................................................................12 FPM
Max. Cut Depth Planing Full Width......................................................................................................... 1/16 in.
Max. Cut Depth Planing 6 Inch Wide Board..............................................................................................1/8 in.
Max. Profile Depth Moulding.....................................................................................................................3/4 in.
Max. Profile Width Moulding................................................................................................................ 4-9/16 in.

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2Model G1037Z
Cutterhead Info
Cutterhead Type......................................................................................................................................3 Knife
Cutterhead Dia.......................................................................................................................................2-5/8 in.
No. Of Knives....................................................................................................................................................3
Knife Type....................................................................................................................................................HSS
Knife Size Length.......................................................................................................................................13 in.
Knife Size Width........................................................................................................................................5/8 in.
Knife Size Thickness.................................................................................................................................1/8 in.
Knife Adjustment............................................................................................................. Gibs and Jack Screws
Table Info
Table Movement...........................................................................................................................................6 in.
Table Bed Size Length.........................................................................................................................14-1/8 in.
Table Bed Size Width...........................................................................................................................17-3/4 in.
Table Bed Size Thickness......................................................................................................................1-3/8 in.
Floor To Table Height......................................................................................................................... 29 - 35 in.
Construction
Table Construction...................................................................................................Precision Ground Cast Iron
Body Construction................................................................................................................................Cast Iron
Stand Construction.................................................................................................................Pre-Formed Steel
Cutterhead Assembly Construction..........................................................................One Piece Machined Shaft
Infeed Roller Construction.......................................................................................................Rubberized Steel
Outfeed Roller Construction....................................................................................................Rubberized Steel
Paint...........................................................................................................................................Powder Coated
Other
Measurement Scale....................................................................................................................Inch and Metric
No. Of Dust Ports..............................................................................................................................................1
Dust Port Size.............................................................................................................................................. 4 in.
Mobile Base..............................................................................................................................................G7314
Other Specifications:
ISO Factory ...................................................................................................................................................ISO 9001
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location ................................................................................. Machine Data Plate on Top of Machine
Assembly Time .......................................................................................................................................... 1-1/2 hours
Features:
Convenient Knife Changes
Guides Are Easily Adjustable
4" Dust Port
Precision Ground Cast Iron Table
Powder Coated Paint
Includes Floor Stand
Rubberized Steel Feed Rollers
Anti-Kickback Pawls and Chip Breaker Device
4 Column Table Support
2 Moulding Fences