Grundig G6 AVIATOR User manual

G6 AVIATOR
FM/AM/Aircraft Band/Shortwave Radio with SSB
OWNER’S MANUAL
Grundig Radio Line By etón re_inventing radio www.etoncorp.com

3
G6 AVIATOR OWNER’S MANUAL
DO YOU NEED HELP?
If you need help, please contact us, Monday-Friday, 8:30 a.m.-4:00
p.m., North American Pacific Time. 1-800-872-2228 from the U.S;
1-800-637-1648 from Canada; 650-903-3866, worldwide; FAX:
650-903-3867; web site, www.etoncorp.com; Etón Corporation,
1015 Corporation Way, Palo Alto, CA 94303, USA
WARNING
• Do not expose this appliance to rain or moisture.
• Do not submerge or expose for extended period to water.
• Protect from high humidity and rain.
• Only operate within specified temperature range (0 °C to 40 °C).
• Unplug immediately if liquid has been spilled or objects have
fallen into the apparatus.
• Clean only with a dry cloth. Do not use detergents or chemical
solvents as this might damage the finish.
• Unplug and disconnect external antennas (not included) during
lightning storms.
• Do not remove cover [or back].
• Refer servicing to qualified service personnel.
Disposal
According to the European Directive 2002/96/EC
all electrical and electronic products must be col-
lected separately by a local collection system.
Please act according to your local rules and do not dispose of your
old products with your normal household waste.
ENVIRONMENT
Grundig Radio Line By

4
G6 AVIATOR OWNER’S MANUAL
• Owner’s manual
• Warranty card
• Carrying pouch
• Carrying strap (attached)
• Supplementary antenna
• AC adapter/charger.
Power the G6 by installing 2 AA alkaline (not included), lithium or
Ni-MH batteries or by plugging in the AC adapter. A symbol appears
in the upper right of the LCD, indicating battery or AC adapter
power.
To minimize the possibility of battery acid leakage, only use high
quality alkaline, lithium or rechargeable nickel-metal-hydride bat-
teries. Never intermix old with new, or different brands or types of
batteries. Damage caused by battery acid leakage is not covered by
this product’s warranty.
Use a quick, short press of the POWER/SLEEP, , button to turn on
the radio without the sleep timer. Use a long press (3 seconds) to
turn it on with the sleep timer on.
POWER SOURCES
PREVENTING BATTERY LEAKAGE
TURNING THE G6 ON AND OFF WITHOUT/WITH
THE SLEEP TIMER
WHAT’S INCLUDED?

5
G6 AVIATOR OWNER’S MANUAL
Numeric keypad buttons #1-7 have dual functions, one function
with the radio turned off and another with the radio turned on.
These functions are described in the text.
With the optional AC adapter/charger connected, the G6 internally
recharges 2 Ni-MH (nickel-metal-hydride) rechargeable batteries
(not included). Note that the G6 can still play while the batteries are
charging and the alarm functions will work.
To charge batteries:
1. With the G6 turned off, install 2 NI-MH batteries and connect
the AC adapter/charger.
2. Press the battery charge button (numeric keypad #7) for about 3
seconds, or until CHG appears in the upper right of the display.
3. Use the tuning knob to select the charging time in hours (00-36)
based on the mAh rating of your batteries: 11 hours for 1100
mAH rating; 23 hours for 2300 mAH rating; etc.
4. Press the PAGE/TIME button when finished. In the display, the
battery symbol’s segments continuously activate from left to right
during charging. Battery charging terminates once the set charge
time has been reached.
Your G6 has been set up at the factory for use in North America
(U.S. or Canada), no changes to the initial factory settings are
needed. If you’re in another part of the world, follow the steps
below to set it for your area.
CHARGING NI-MH BATTERIES IN THE G6
SETTING UP AM AND FM OUTSIDE OF NORTH
AMERICA
THE NUMERIC KEYPAD #1-8 DUAL-FUNCTION
BUTTONS

6
G6 AVIATOR OWNER’S MANUAL
SETTING UP AM AND FM OUTSIDE OF NORTH
AMERICA continued
In North America, the FM band begins at 87.5 MHz. In other parts
of the world, it may begin at 87 MHz or 76 MHz.
1. With the G6 turned off press the #4 numeric keypad button
for about 2 seconds. F87.5, F76 or F87 appears flashing in the
display.
2. Press the #4 numeric keypad button sequentially to select the one
that’s correct for your area.
3. Immediately press the PAGE/TIME button.
In North America, AM stations are spaced by 10 KHz. In Europe and
other areas, they are spaced by 9 KHz.
1. With the G6 turned off press the #5 numeric keypad button for
about 2 seconds. 9 or 10 KHz appear flashing in the display.
2. Press the #5 numeric keypad button sequentially to select the one
that’s correct for your area.
3. Immediately press the PAGE/TIME button.
The sleep timer enables the G6 to play for a specified number of
minutes (00-99), then shut off.
1. To activate the sleep-timer turn the radio on with a 2 second
press of the SLEEP button, ; 01-99 appears in the display.
2. Use the tuning knob to select the number of minutes, 01-99, you
want it to play, or select ON with the tuning knob if you don’t
want to utilize the sleep timer.
USING THE SLEEP TIMER

7
G6 AVIATOR OWNER’S MANUAL
VOLUME CONTROL
With the G6 on or off, use the +-/VOL buttons to adjust to volume
levels 0-31. The level number appears in the display.
Turn the volume down before wearing the earphones, then turn up
the volume to your liking. Plug them into the earphone socket on
the left side of the radio.
When listening to FM, shortwave or Aircraft Band, fully extend the
telescopic antenna. It need not be extended when listening to AM
stations (the AM ferrite-bar antenna is located inside the G6).
Turn on the G6. To go to the band of your choice press the FM
BAND button, sequentially press the MW (AM)/LW/AIR button or
sequentially press the METERBAND button to cycle through the SW
meterbands.
Turn on the G6. Stations are tuned with the AUTO Buttons,
Tuning-Knob, Direct Frequency Entry and Auto-Search.
EARPHONE SOCKET AND USING EARPHONES
(NOT INCLUDED)
SELECTING FM, AM, SHORTWAVE AND
AIRCRAFT BAND
TUNING IN STATIONS

8
G6 AVIATOR OWNER’S MANUAL
MANUAL TUNING
Quick, short, sequential presses of the AUTO buttons enables
tuning up or down frequency. Alternately, the TUNING knob can be
used.
In Shortwave the tuning knob or manual tuning must be used to
tune out of the broadcast bands.
Turn on the G6. Use this method when the desired frequency of a
radio station is known. AM, LW and SW frequencies are entered in
kilohertz (KHz), e.g. 810 KHz, 162 KHz or 9475 KHz.; FM and Air
Band frequencies are entered in megahertz (MHz), e.g. 102.9 MHz
or 124.870 MHz, ignoring the decimal point.
1. Use the numeric keypad buttons to enter the frequency.
2. Within 3 seconds, press the AM button if it’s an MW (AM), LW,
SW or AIR frequency, or the FM button for FM frequencies.
With the G6 on, auto-search tuning starts by pressing either of the
AUTO SEARCH buttons (AUTO ) for about 2 seconds. The G6
has 3 selectable auto-search modes: STOP, ATS or D-5. The factory
programmed default mode is STOP. These are described below.
STOP: Auto-searching stops on the next encountered station.
D-5: Auto-searching stops for 5 seconds on each encountered sta-
tion, then moves on.
ATS: (Auto Tuning Storage): Auto-searching automatically stores the
strongest FM local stations into memories starting with page
99 and counting downward until all are stored, e.g. 98, 97,
96, etc. Tune to the FM band and perform auto-search.
DIRECT FREQUENCY ENTRY
AUTO-SEARCH TUNING

9
G6 AVIATOR OWNER’S MANUAL
After the ATS scan, press PAGE/TIME to enter the memo mode. Se-
lect page 99 or lower with the AUTO buttons, and the memory
with the numeric keypad #1-7 buttons.
To select an auto-search mode:
1. With the G6 turned off, hold down the numeric keypad #6 but-
ton for about 2 seconds, then release. Note that the last chosen
mode flashes in the screen.
2. While the mode flashes, perform quick, short presses of the #6
button to select alternate modes.
3. Press the PAGE/TIME button when finished.
NOTE: auto tuning cannot be performed in air band.
Turn on the G5. Stations are tuned with the Buttons, Tun-
ing-Knob, Direct Frequency Entry and Auto-Search. Quick, s hort,
sequential presses of the buttons enables tuning up or down
frequency. Alternately, the TUNING knob can be used. Continuous
tuning in shortwave can only be done with the tuning knob and via
direct frequency entry.
To learn about shortwave we recommend the two publications
below, published yearly and available from major booksellers.
Additionally, the Internet is a great resource for learning about
shortwave. Go to your favorite search engine and type in ‘shortwave
listening’.
AUTO-SEARCH TUNING continued
TUNING KNOB AND JOG BUTTON USE
SHORTWAVE LISTENING

10
G6 AVIATOR OWNER’S MANUAL
SHORTWAVE LISTENING continued
PASSPORT TO WORLD BAND RADIO
Published by International Broadcasting Services (IBS); IBS North
America, Box 300, Penn’s Park PA 18943. Phone: [phone].
www.passband.com.
WORLD RADIO TV HANDBOOK
Published in the USA by Watson-Guptill Publications, 770 Broadway,
7th Floor, New York, NY 10003-9595.
www.watsonguptill.com.
Shortwave enables listening to broadcasts over vast distances includ-
ing other countries and continents. The following information will
help you get the best results. Select appropriate SW meterbands
with the METERBAND button.
• During the day, frequencies above 11000 KHz are usually best.
• At night, frequencies below 13000 KHz are usually best.
• Around sunset and sunrise, the entire shortwave range may be
good.
• Getting very close to a window and holding the radio improves
shortwave reception.
SSB enables listening to shortwave two-way communications using
the single-sideband mode, such as amateur radio, Morse code,
weather-fax transmissions and other signals often referred to as
‘utility’ signals. The Internet and your local library are great resources
to learn more.
SHORTWAVE BROADCAST RECEPTION
TUNING SSB (SINGLE SIDEBAND)

11
G6 AVIATOR OWNER’S MANUAL
TUNING SSB (SINGLE SIDEBAND) continued
Turn on the G6. Tune to the shortwave frequency of your choice,
using the methods described. To use SSB, turn on the SSB circuit
by pressing the SSB button. Note that SSB appears in the display.
Use the tuning knob to FAST-tune the SSB signal, then SLOW-tune
with the tuning knob. Press the JOG button to change from ‘Fast’
to ‘Slow’ tuning. The SSB circuit allows tuning of both upper and
lower sideband signals.
The G6 has 700 memories (also called presets), arranged in 100
pages (page 00-99), with each page holding 7 memories. Buttons
#1-7 represent memory locations. All memories are randomly pro-
grammable, meaning that any kind of frequency can be stored into
any memory. SSB selection is not stored.
Note that when storing into an already occupied memory position,
its contents will be replaced with your new entry.
1. Turn on the G6.
2. Tune to the desired station.
3. Press the PAGE/TIME button to place the G6 into MEMO mode.
4. To select the desired memory page (00-99) use the AUTO
buttons.
5. Store the station by pressing one of the #1-7 buttons for about
2 seconds or until the square around the memory location in the
LCD blinks.
6. To store another station, get out of memo mode by pressing
PAGE/TIME and tune to the station; then repeat the steps above.
7. When finished storing stations, press the PAGE/TIME button to
exit MEMO mode.
STORING STATIONS INTO MEMORY

12
G6 AVIATOR OWNER’S MANUAL
ACCESSING STORED MEMORIES
1. Turn on the G6 and enter MEMO mode by pressing the PAGE/
TIME button, causing MEMO to appear on the left side of the
display.
2. Select the desired memory page with the AUTO buttons.
3. Select the desired memory with the numeric keypad buttons #1-
7. The square around the selected memory blinks.
The only way to delete one memory location is to delete the entire
memory page or simply store another frequency over it.
1. To delete a memory page turn the G6 off.
2. Press SSB until MEMO and PAGE appear in the display.
3. Use AUTO to select the page whose contents you wish to
erase.
4. Press EDIT to erase the contents. Note that the squares disappear
around the memory locations.
This feature enables copying memory contents from one page to
another.
1. Turn the G6 off.
2. Press SSB until MEMO and PAGE appear in the display.
3. Use AUTO to select the page whose contents you wish to
copy.
4. Press/release SSB. COPY appears in the display.
5. Use AUTO to select the page to copy to.
6. Press/release EDIT to paste it.
COPY A MEMORY PAGE
DELETING ONE MEMORY
DELETING THE CONTENTS OF A MEMORY PAGE

13
G6 AVIATOR OWNER’S MANUAL
DELETING THE CONTENTS OF ALL
MEMORY PAGES
1. Turn the G6 off.
2. Do a long press on the numeric keypad numbers 0, 9 and 0. RST
appears in the display.
3. Press the RESET button with a paper clip.
Memory pages can be uniquely labeled with four, intermixed digits
or letters.
1. With the G6 turned on, select memory mode with the PAGE/
TIME button. MEMO appears in the display.
2. Use the AUTO buttons to select the desired memory page.
3. Press the EDIT button until ‘_’ appears, blinking in the display
(about 3 seconds).
4. Use the tuning knob to select the desired number, letter, quota-
tion mark or symbol.
5. Press the PAGE/TIME button to select the next ‘_’.
6. Repeat until 4 letters/numbers are selected.
7. Press PAGE/TIME when finished.
(Use this same procedure to change your time zone when
traveling).
1. With the G6 turned off, press the numeric keypad #8 button
until you see a time zone abbreviation in the display and ‘Tzone’
appears on the left side.
2. Do quick, sequential presses on the 8 button, or use the tuning
knob to tune to different time zones (see the chart below).
3. Press the PAGE/TIME button once you’ve selected your time zone
or wait about 8 seconds and it will enter itself.
LABELING MEMORY PAGES
SETTING THE TIME ZONE

14
G6 AVIATOR OWNER’S MANUAL
SETTING THE TIME ZONE continued
TIME ZONE ABBREVIATION LIST:
SETTING THE CLOCK AND WEEKDAY
ANC-Anchorage BEG-Beijing
BKK-Bangkok CAI-Cairo
CCS-Caracas CHI-Chicago
DAC-Dhaka DEL- Delhi
DEN-Denver DXB-Dubai
GMT-GMT HKG-Hong Kong
HNL-Honolulu JED-Jeddah
KHI-Kashi LAX-Los Angeles
LON-London NOU-Noumea
NYC-New York City PAR-Paris
RIO-De Janeiro SYD-Sydney
TYO-Tokyo WLG-Wellington
The G6’s clock is in 24-hour format. Turn off the G6.
1. With the G6 off, press the PAGE/TIME button for about 2 sec-
onds or until the hour digits start flashing.
2. Within 3 seconds, press one of the 1-7 buttons to designate
the day of the week you wish to use as the starting day, note
that the number that you’ve selected appears highlighted in the
display.
3. Use the tuning knob to set the correct hour; then press PAGE/
TIME button.
4. The minute digits start flashing. Within 3 seconds, use the tuning
knob to set the correct minutes, then press PAGE/TIME button.
The clock is set

15
G6 AVIATOR OWNER’S MANUAL
The G6 has 3, independently programmable alarm timers (numeric
keypad buttons #1-3) to turn it on at a specified time. Additionally,
each timer can be programmed for a specific weekday, volume,
playtime and memory location.
To set an alarm:
1. With the G6 turned off, press one of the alarm buttons for about
2 seconds (numeric keypad buttons #1-3), causing the hour to
flash.
2. Press one, all or any of the #1-7 buttons to highlight the days of
the week you want the alarm to turn on.
3. Use the tuning knob to set the hour; then press the PAGE/TIME
button. The minutes flash.
4. Use the tuning knob to set the minutes; then press the PAGE/
TIME button.
5. Use the tuning knob to set the wake-up volume level; it will
show in the display.
6. Press the PAGE/TIME button.
7. Use the tuning knob to set the wake-up alarm’s playing minutes,
01-99 minutes.
8. Press the PAGE/TIME button.
9. Use the tuning knob to set the page number, 00-99.
10. Press one of the #1-7 buttons to select the memory location on
the selected page (the square flashes).
11. Press the PAGE/TIME button to finish the set-up.
SETTING ALARMS 1 THROUGH 3

16
G6 AVIATOR OWNER’S MANUAL
For an alarm to turn on the radio, it must be activated. To activate
the alarm to be used, turn off the G6 and press the appropriate
alarm button, #1-3. Note the alarm symbol above the button. This
causes the alarm activation symbol to appear in the display, activat-
ing the selected alarm. To deactivate the alarm, press the appropri-
ate #1-3 button, causing the alarm activation symbol to disappear
from the display.
The light illuminates the display.
Normal Mode: Pressing any button activates the light. The light
automatically turns off after 5 seconds.
Manual Light-On/Off Mode: If the light is off, pressing the LIGHT
button activates the light for 5 seconds. Pressing it again within 5
seconds turns the light off.
Always-On Mode: When powered by its AC adapter and the light
button is pressed, the light remains on when the G6 is turned on.
The external antenna socket is used to connect the G6 to advanced
performance shortwave antennas using a 50 or 75-Ohm coaxial
cable feed-line or to a long wire antenna. When using a 50 to 75
Ohm feedline, it may be necessary to attenuate the signal using an
antenna tuner or other method.
ACTIVATING AND DEACTIVATING THE ALARMS
USING THE LIGHT
EXTERNAL ANTENNA SOCKET

17
G6 AVIATOR OWNER’S MANUAL
When listening to FM stations this switch selects stereo or mon-
aural. Select stereo when using earphones. When not using ear-
phones, it’s OK to leave it on stereo. In either case, if the FM signal
is poor, selecting mono may improve it. When this is turned on ‘ST’
appears in the display.
AM/FM – The MEGABASS-MUSIC position creates a ‘brighter’
music sound. The NEWS position creates a less ‘bright’ sound.
Shortwave – The MEGABASS-MUSIC position creates the best
audio fidelity. The NEWS position helps to minimize interference
from other stations.
Pull the folding stand from the rear of the G6, allowing viewing at a
comfortable angle.
The reset button is located inside the small hole labeled RESET. If
the G6 operates erratically, poke a paper clip into the reset hole to
reset its microprocessor. This does not erase memory, but does reset
the clock to 00:00. To reset everything, including memory, turn the
G6 off, do a long press on 0 9 0 and then press a paperclip into the
RESET hole.
STEREO/MONO BUTTON
MEGABASS-MUSIC/NEWS SWITCH
REAR FOLDING STAND
RESET BUTTON

18
G6 AVIATOR OWNER’S MANUAL
With the G6 turned off, one press of the HOLD button (under the
ON/OFF button) prevents unwanted turn-on. When it is turned on,
one press of the HOLD button keeps it turned on, but prevents
unwanted frequency changes. Deactivate HOLD with a long (about
2 second) press of the HOLD button.
The signal strength indicator is in the lower right side of the display
and shows relative strength of signals. When signal strengths are
somewhat weak, it is normal for the indicator’s level to fluctuate.
The signal strength indicator is in the lower right side of the display
and shows relative strength of signals. When signal strengths are
somewhat weak, it is normal for the indicator’s level to fluctuate.
USING THE HOLD FEATURE
SIGNAL STRENGTH INDICATOR
SIGNAL STRENGTH INDICATOR

19
G6 AVIATOR OWNER’S MANUAL
To ensure full warranty coverage or product updates, registration
of your product should be completed as soon as possible after
purchase or receipt. You may use one of the following options to
register your product:
1. By visiting our website at http://www.etoncorp.com.
2. Mail in enclosed warranty card.
3. Mail your registration card or information to following address;
include your name, full mailing address, phone number, email
address, model purchased, date purchased, retail vendor name:
Etón Corporation
1015 Corporation Way
Palo Alto, CA 94303 USA
Retain the warranty information from your warranty card with your
proof of purchase or the Limited Warranty information can also be
viewed at www.etoncorp.com.
WARRANTY REGISTRATION
LIMITED WARRANTY

20
G6 AVIATOR OWNER’S MANUAL
To obtain service for your product, we recommend first contacting
an Etón service representative at 1-800-872-2228 US, 1-800-637-
1648 Canada, [phone] US, [email protected] or
your respective country distributor in Europe (see enclosed list) for
problem determination and trouble-shooting. If further service is
required, the technical staff will instruct how to proceed based on
whether the radio is still under warranty or needs non-warranty
service.
WARRANTY – If your product is still in warranty and the Etón ser-
vice representative determines warranty service is needed, a return
authorization will be issued and instructions will be given. DO NOT
ship your radio back without obtaining the return authorization.
NON-WARRANTY – If your product is no longer under warranty
and requires service, the Etón service representative will refer you to
the nearest repair facility that will best handle the repair.
For service outside North America, please refer to the distributor
information included at time of purchase/receipt.
The manufacturer is not responsible for any radio or tv interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equip-
ment.
SERVICE FOR YOUR PRODUCT
FCC NOTE