H3C XE 200 User manual

User Manual
H3C XE 200/2000 IP PBX G-Remote Table of Contents
i
Table of Contents
Chapter 1 GUI Overview ...............................................................................................................1-1
Chapter 2 GUI Server Configuration............................................................................................2-1
2.1 GUI Server Configuration Prerequisites ............................................................................2-1
2.2 GUI Server Configuration Procedure.................................................................................2-1
2.2.1 Enabling the GUI Server.........................................................................................2-1
2.2.2 Displaying the User Information List .......................................................................2-1
2.2.3 Clearing the User Information List...........................................................................2-2
2.2.4 Web Service............................................................................................................2-2
2.2.5 Configuring Self-service..........................................................................................2-3
2.2.6 Configuring Operation Rights of Normal Administrators.........................................2-4
2.2.7 GUI Server Configuration Example.........................................................................2-7
Chapter 3 GUI Client Configuration............................................................................................. 3-1
3.1 Installing GUI Client...........................................................................................................3-1
3.1.1 GUI Client Installation Procedure............................................................................3-1
3.2 Introduction to Interfaces...................................................................................................3-4
3.2.1 Tool Bar...................................................................................................................3-4
3.2.2 Device Management Window .................................................................................3-4
3.2.3 Output Window........................................................................................................3-7
3.3 Login Management............................................................................................................3-7
3.3.1 Login........................................................................................................................3-7
3.3.2 Close Connection..................................................................................................3-10
3.4 Operations on the GUI Client...........................................................................................3-10
3.4.1 Configuring Device Parameters............................................................................3-10
3.4.2 Restoring the Default Values ................................................................................3-13
3.4.3 Enabling/Disabling a Voice Service or a Feature..................................................3-14
Chapter 4 XE IP PBX Configuration.............................................................................................4-1
4.1 XE IP PBX Overview .........................................................................................................4-1
4.2 XE IP PBX Configuration...................................................................................................4-1
4.2.1 XE IP PBX Configuration Overview ........................................................................ 4-1
4.2.2 Configuring Interfaces.............................................................................................4-4
4.2.3 Configuring the PS..................................................................................................4-6
4.2.4 Configuring Media Resources...............................................................................4-10
4.2.5 Configuring the MS ...............................................................................................4-11
4.2.6 Configuring the LS ................................................................................................4-13
4.2.7 Configuring the VoIP Network Dialup Scheme.....................................................4-25
4.2.8 Configuring Backup and Load Sharing.................................................................4-30
4.2.9 Configuring CPU Overload Protection ..................................................................4-34

User Manual
H3C XE 200/2000 IP PBX G-Remote Table of Contents
ii
4.2.10 Configuring NAT/FW Tunnel Traversal............................................................... 4-35
4.2.11 Configuring Voice RADIUS Accounting ..............................................................4-37
Chapter 5 Call Service Configuration.......................................................................................... 5-1
5.1 Call Service Overview........................................................................................................5-1
5.2 Subscriber Management Service.......................................................................................5-2
5.2.1 Introduction to Subscriber Management Service....................................................5-2
5.2.2 Configuring the Subscriber Status .......................................................................... 5-3
5.3 Emergency Call Service ....................................................................................................5-3
5.3.1 Introduction to Emergency Call Service..................................................................5-3
5.3.2 Configuring Emergency Call Numbers....................................................................5-3
5.4 Call Limit Group Service....................................................................................................5-4
5.4.1 Introduction to Call Limit Group Service .................................................................5-4
5.4.2 Configuring Call Limit Groups.................................................................................5-5
5.4.3 Configuring Call Limit Group Service......................................................................5-6
5.5 Outgoing Call Authority Control Service............................................................................5-7
5.5.1 Introduction to Outgoing Call Authority Control Service..........................................5-7
5.5.2 Configuring Subscriber Roles .................................................................................5-7
5.5.3 Configuring Outgoing Call Authority Control Service............................................5-10
5.6 Abbreviated Dialing Service.............................................................................................5-10
5.6.1 Introduction to Abbreviated Dialing Service..........................................................5-10
5.6.2 Configuring Abbreviated Dialing Service ..............................................................5-11
5.7 Do-Not-Disturb Service....................................................................................................5-11
5.7.1 Introduction to Do-Not-Disturb Service .................................................................5-11
5.7.2 Configuring Do-Not-Disturb Service......................................................................5-12
5.8 Calling Line Identification Control Services.....................................................................5-12
5.8.1 Introduction to Calling Line Identification Control Services...................................5-12
5.8.2 Configuring Calling Line Identification Control Services....................................... 5-13
5.9 Password Call Service.....................................................................................................5-14
5.9.1 Introduction to Password Call Service .................................................................. 5-14
5.9.2 Configuring Password Call Service.......................................................................5-14
5.10 Call Forwarding Services...............................................................................................5-15
5.10.1 Introduction to Call Forwarding Services............................................................5-15
5.10.2 Configuring CFU Service ....................................................................................5-16
5.10.3 Configuring CFC Service ....................................................................................5-17
5.10.4 Configuring CFT Service.....................................................................................5-18
5.10.5 Configuring CFO Service....................................................................................5-19
5.10.6 Configuring CFB Service.....................................................................................5-21
5.10.7 Configuring CFNR Service..................................................................................5-22
5.11 Third Party Call Termination Service.............................................................................5-23
5.11.1 Introduction to Third Party Call Termination Service ..........................................5-23
5.11.2 Using Third Party Call Termination Service........................................................5-23
5.12 ONLY Service................................................................................................................5-24

User Manual
H3C XE 200/2000 IP PBX G-Remote Table of Contents
iii
5.12.1 Introduction to ONLY Service..............................................................................5-24
5.12.2 Configuring ONLY Service..................................................................................5-24
5.13 Time Limit Call Service..................................................................................................5-25
5.13.1 Introduction to Time Limit Call Service ...............................................................5-25
5.13.2 Configuring Time Limit Call Service....................................................................5-26
5.14 Third Party Call Control Service ....................................................................................5-26
5.14.1 Introduction to Third Party Call Control Service..................................................5-26
5.14.2 Configuring Third Party Call Control Service......................................................5-27
5.15 Callback-On–Busy Service............................................................................................5-27
5.15.1 Introduction to Callback-On–Busy Service .........................................................5-27
5.15.2 Configuring Callback-On-Busy............................................................................5-28
5.16 Call Pickup Service........................................................................................................5-28
5.16.1 Introduction to Call Pickup Service .....................................................................5-28
5.16.2 Configuring Call Pickup Service..........................................................................5-29
5.17 Call Intervention Service................................................................................................5-29
5.17.1 Introduction to Call Intervention Service.............................................................5-29
5.17.2 Configuring Call Intervention Service..................................................................5-30
5.18 Dialing Test Service.......................................................................................................5-30
5.18.1 Introduction to Dialing Test Service ....................................................................5-30
5.18.2 Configuring Dialing Test Service......................................................................... 5-30
5.19 Time Announcement Service.........................................................................................5-31
5.19.1 Introduction to Time Announcement Service......................................................5-31
5.19.2 Configuring Time Announcement Service ..........................................................5-31
5.20 MyRing Service..............................................................................................................5-31
5.20.1 Introduction to MyRing Service...........................................................................5-31
5.20.2 Configuring MyRing Service................................................................................5-32
5.21 CPCP Service................................................................................................................5-33
5.21.1 Introduction to CPCP Service .............................................................................5-33
5.21.2 Configuring CPCP Service..................................................................................5-34
5.22 Automatic Operator Service...........................................................................................5-34
5.22.1 Introduction to Automatic Operator Service........................................................5-34
5.22.2 Configuring Automatic Operator Service ............................................................5-35
5.23 Group Notification Service.............................................................................................5-35
5.23.1 Introduction to Group Notification Service ..........................................................5-35
5.23.2 Configuring Group Notification Service...............................................................5-37
5.24 Call Transfer Service.....................................................................................................5-39
5.24.1 Introduction to Call Transfer Service...................................................................5-39
5.24.2 Configuring Call Transfer Service.......................................................................5-40
5.25 Number Query Service..................................................................................................5-40
5.25.1 Introduction to Number Query Service................................................................5-40
5.25.2 Configuring Number Query Service....................................................................5-41
5.26 Alarm Clock Service ......................................................................................................5-41

User Manual
H3C XE 200/2000 IP PBX G-Remote Table of Contents
iv
5.26.1 Introduction to Alarm Clock Service....................................................................5-41
5.26.2 Configuring Alarm Clock Service ........................................................................5-42
Chapter 6 System Management...................................................................................................6-1
6.1 User Management .............................................................................................................6-1
6.1.1 User Account Levels...............................................................................................6-1
6.1.2 Naming Rule and Rights for Users..........................................................................6-2
6.1.3 Account Management by the Super Administrator .................................................6-2
6.1.4 Changing Your Password .......................................................................................6-4
6.1.5 Managing Operation Rights of Normal Administrators............................................6-4
6.1.6 Configuring Self-service..........................................................................................6-8
6.2 Device Status Query..........................................................................................................6-9
6.3 Telnet Login.....................................................................................................................6-11
6.4 Saving the Configuration .................................................................................................6-11
6.5 Backup/Recovery of the Configuration File.....................................................................6-11
6.6 Statistics Query................................................................................................................6-12
6.7 Multi-Device Management...............................................................................................6-13
6.7.1 Managing Multiple XE IP PBXs.............................................................................6-13
6.7.2 Device Management Under the LS.......................................................................6-14

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 1 GUI Overview
1-1
Chapter 1 GUI Overview
H3C XE 200/2000 IP PBX (hereinafter referred to as the XE IP PBX) provides graphical
user interfaces (GUIs) to enable easy configurations. GUI is classified as GUI server
and GUI client. The GUI server runs inside the XE IP PBX, and the GUI client runs on a
PC with Microsoft Windows operating systems.
GUI provides you with a friendly operating interface and enables you to apply the
functions and services correctly and quickly, thereby facilitating voice network
management.

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration
2-1
Chapter 2 GUI Server Configuration
2.1 GUI Server Configuration Prerequisites
On the XE IP PBX, the interface connected to Ethernet is configured with a correct IP
address and subnet mask, and is reachable to the PC running the GUI client software.
2.2 GUI Server Configuration Procedure
2.2.1 Enabling the GUI Server
Configure to enable the GUI server as follows:
Table 2-1 GUI server configuration
Operation Command Remarks
Enter system view system-view —
Enter GUI server
configuration view gui —
Configure the interface
number and port number
for the GUI server
gui-config interface
interface-type
slot-number [ port port ]
Required.
The port number is
optional. The GUI client
communicates with the
GUI server through the
port. The port number
ranges from 1 to 65535
and defaults to 10,999.
Enable the GUI server start Required
Use the stop command to disable the GUI server.
2.2.2 Displaying the User Information List
Run the display gui-user command in any view to display the administrator
information list.

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration
2-2
Table 2-2 Display the user information list
Operation Command Remarks
Display the user
information list display gui-user {all | online }
Required. Keyword all is
to display information of
all administrators and
online is to display
information of current
login administrators.
2.2.3 Clearing the User Information List
Clear the user information list as follows:
Table 2-3 Clear the user information list
Operation Command Remarks
Enter system view system-view —
Enter GUI server configuration view gui —
Clear the user information list reset-ual Required
Caution:
zThis command restores the user information list to the initial state, that is, only the
default account is contained.
zIf the GUI server has been started, you need to shut it down first.
zUse this command carefully to avoid the loss of important information.
2.2.4 Web Service
The XE IP PBX provides the Web service, helping you to access the XE IP PBX
through the Web browser and download the GUI client software.
After you enable the Web service, you can visit http://xxx.xxx.xxx.xxx/filename to view
the corresponding file under the directory flash:/web on the XE IP PBX. By default, you
will directly access the index.html file under this directory when you visit
http://xxx.xxx.xxx.xxx. That is, visiting http://xxx.xxx.xxx.xxx is the same as visiting
http://xxx.xxx.xxx.xxx/index.html.

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration
2-3
By default, there are ten files in the flash:/web directory on the XE IP PBX: index.html,
zh_down.html, en_down.html, g-remote_ch.exe, g-remote_en.exe, banner.jpg,
zh_down.png, en.png, zh.png, and zh_describe.png.
Note:
zThe above mentioned xxx.xxx.xxx.xxx represents the IP address of the XE IP PBX,
and filename refers to the name of the file saved under the flash:/web directory on
the XE IP PBX.
zAfter you modify or delete a file under the flash:/web directory, restart the Web
server so that your change can take effect. However, adding a file does not need the
restart-up.
zBe careful to rename or delete files under the flash:/web directory. Improper
operations may cause failure of downloading GUI client software.
zClick [XE G-Remote English Version] on the [XE G-Remote Download] Web page to
download the GUI client software.
Enable or disable the Web service as follows:
Table 2-4 Enable/disable the Web service
Operation Command Remarks
Enter system view system-view —
Enter GUI server configuration view gui —
Enable/disable the Web service web {start |stop }Required
2.2.5 Configuring Self-service
With the self-service, a user can log on to the GUI server with the normal user account
and perform the following operations on one’s own account:
zQuerying account configurations.
zConfiguring services.
zChanging the password.
A normal user can configure/query the following services on the GUI server:
zAbbreviated dialing. Refer to Abbreviated Dialing Service for configuration details.
zCall forwarding services. Refer to Call Forwarding Services for configuration
details.
zMyRing service. Refer to MyRing Service for configuration details.
zDo-not-disturb service. Refer to Do-Not-Disturb Service for configuration details.
zAlarm clock service. Refer to Alarm Clock Service for configuration details.

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration
2-4
Before a user logs onto the GUI server, the GUI server and self-service must be
enabled.
Note:
About details about user classification, refer to Naming Rule and Rights for Users.
Configure the self-service as follows.
Table 2-5 Configure the self-service
Operation Command Remarks
Enter system view system-view —
Enter LS view location-server —
Enter LS-GW view gateway gateway-id —
Enter subscriber number
view subscriber short-number
long-number —
Enable user self-service srv-switch gui on Required
Configure login password
of the user self-service gui-pwd
user-log-password
Required
The default login
password is 1234.
Note:
The system checks the self-service operation every five minutes. After two system
checks, if still no operation has been performed, the XE IP PBX disconnects a
self-service user.
2.2.6 Configuring Operation Rights of Normal Administrators
For operation rights of normal administrators, refer to User Management.
I. Permit/prohibit normal administrators’ operations on a specific gateway
This configuration takes effect after a normal administrator logs in through GUI client,
and thus the normal administrator can perform permitted operations.
Table 2-6 Permit/prohibit normal administrators’ operations on a specific gateway
Operation Command Remarks
Enter system view system-view —

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration
2-5
Operation Command Remarks
Enter LS view location-server —
Enter LS-GW view gateway gateway-id —
Permit/prohibit normal
administrators’ operations on
a specific gateway access {permit |prohibit }Required
II. Permit/prohibit normal administrators’ operations on a specific office group
Table 2-7 Permit/prohibit normal administrators’ operations on a specific office group
Operation Command Remarks
Enter system view system-view —
Enter LS view location-server —
Enter LS-OFFICEGROUP view office-group
office-group-id —
Permit/prohibit normal administrators’
operations on a specific office group access {permit | prohibit }Required
III. Permit/prohibit normal administrators’ right to add/delete a gateway
Table 2-8 Permit/prohibit normal administrators’ right to add/delete a gateway
Operation Command Remarks
Enter system view system-view —
Enter LS view location-server —
Permit/prohibit normal administrators’
right to add/delete a gateway access list gateway {permit |prohibit }Required
IV. Permit/prohibit normal administrators’ right to add/delete an office group
Table 2-9 Permit/prohibit normal administrators’ right to add/delete an office group
Operation Command Remarks
Enter system view system-view —
Enter LS view location-server —
Permit/prohibit normal
administrators’ right to add/delete
an office group
access list office-group
{permit |prohibit }Required

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration
2-6
V. Permit/prohibit normal administrators’ right to run commands in gateway
view
Table 2-10 Permit/prohibit normal administrators’ right to run commands in gateway
view
Operation Command Remarks
Enter system view system-view —
Enter LS view location-server —
Permit/prohibit normal administrators’
right to run commands in gateway view
access command
gateway {permit |
prohibit }Required
VI. Permit/prohibit normal administrators’ right to run commands in office
group view
Table 2-11 Permit/prohibit normal administrators’ right to run commands in office
group view
Operation Command Remarks
Enter system view system-view —
Enter LS view location-server —
Permit/prohibit normal
administrators’ right to run
commands in office group view
Access command office-group
{permit |prohibit }Required
VII. Permit/prohibit normal administrators’ right to configure IP addresses for
gateways
Table 2-12 Permit/prohibit normal administrators’ right to configure IP addresses for
gateways
Operation Command Remarks
Enter system view system-view —
Enter LS view location-server —
Permit/prohibit normal
administrators’ right to configure IP
addresses for gateways
access command
gw:ip-address {permit |
prohibit }Required

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration
2-7
2.2.7 GUI Server Configuration Example
I. Network requirements
Enable the GUI server on the XE IP PBX and enable the Web service.
II. Configuration procedure
<XE>system-view
# Configure the Ethernet interface.
[XE]interface ethernet 0/0
[XE-Ethernet0/0]ip address 192.168.80.50 255.255.255.0
[XE-Ethernet0/0]quit
# Configure the GUI server.
[XE]gui
[XE-gui]gui-config interface ethernet 0/0
# Enable the GUI server.
[XE-gui]start
# Enable the Web service.
[XE-gui]web start

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-1
Chapter 3 GUI Client Configuration
3.1 Installing GUI Client
3.1.1 GUI Client Installation Procedure
The GUI client installation software is located in the flash:/web directory on the XE IP
PBX. Before installation, ensure files index.html, zh_down.html, en_down.html,
g-remote_ch.exe, g-remote_en.exe, banner.jpg, zh_down.png, en.png, zh.png, and
zh_describe.png are in this directory.
Note:
The GUI client is installed through green copy. Therefore, to uninstall the GUI client,
you can simply delete the installation folder, which defaults to C:\Program
Files\G-Remote, and the corresponding shortcuts in the Start menu and on the
desktop.
To install the GUI client:
1) Enable the Web server on the XE IP PBX.
Table 3-1 Enable the Web server
Operation Command Remarks
Enter system view system-view —
Enter GUI server configuration view gui —
Enable the Web server web start Required
2) Visit http://xxx.xxx.xxx.xxx through IE on your PC to enter the GUI client download
page shown in Figure 3-1. Here xxx.xxx.xxx.xxx refers to the IP address of the XE
IP PBX.

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-2
Figure 3-1 GUI client download page
3) Select [XE G-Remote English Version] on the GUI client download page and the
[File Download] dialog box pops up, as shown in Figure 3-2.
Figure 3-2 [File Download] dialog box
4) Click <Run> or <Save> to download the installation file. The dialog box in
Figure 3-3 displays the downloading progress.

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-3
Figure 3-3 Download progress dialog box
5) Run the installation software after you download it. Figure 3-4 shows the “XE-GUI
Client” installation dialog box. Specify the destination folder where the GUI client
will be installed and then click <Install>. During the installation, a progress bar
appears at the bottom of the dialog box.
Figure 3-4 “XE-GUI Client” installation dialog box
After the installation, the [G-Remote] item appears in the [Start/Program/H3C] menu,
and a G-Remote shortcut is added to the desktop.
6) Run the GUI client.
Three methods are available to start the GUI client:
zSelect [Start/Program/H3C/G-Remote].

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-4
zDouble-click the G-Remote shortcut on the desktop.
zDouble-click the G-Remote.exe icon in the folder where the GUI client is installed.
3.2 Introduction to Interfaces
3.2.1 Tool Bar
The GUI client software provides you with a shortcut tool bar, including the commonly
used <Login>, <Close Connection>, <Output Bar>, and <About G-Remote> buttons.
Figure 3-5 shows the tool bar.
Figure 3-5 Tool bar
3.2.2 Device Management Window
In the device management window, you can perform all operations on the device that
you log on to. You can log on to multiple devices concurrently. Each device
corresponds to a device management window, and you can perform the switchover
between them as needed. Figure 3-6 shows the device management window.
Figure 3-6 Device management window

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-5
I. Navigation tree
All the configuration items for the XE IP PBX are included on the navigation tree shown
in Figure 3-7. Here, you can query all the configuration data and status information, and
change the configuration data.
Figure 3-7 Navigation tree
II. Navigation bar of the view
The navigation bar displays the view path that you configure. The path corresponds to
the configuration view in command line mode. Figure 3-8 shows the navigation bar of
the view.

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-6
Figure 3-8 Navigation bar
III. Configuration window
The configuration window shown in Figure 3-9 contains all the configuration
parameters and is a main operating interface for you to use the GUI client to manage
the XE IP PBX.
Figure 3-9 Configuration window

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-7
3.2.3 Output Window
The output window shown in Figure 3-10 outputs all system prompts, including the
information about query operations, execution of commands, connection interruption,
and query timeout during the configuration management.
Figure 3-10 Output window
3.3 Login Management
3.3.1 Login
By default, you can enter the [Login Management] dialog box when the GUI client
software is started, as shown in Figure 3-11.
Figure 3-11 [Login Management] dialog box

User Manual
H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration
3-8
Alternatively, you can display the [Login Management] dialog box through the menu or
tool bar shown in Figure 3-12 and Figure 3-13 respectively.
Figure 3-12 Display the [Login Management] dialog box through the menu
Figure 3-13 Display the [Login Management] dialog box through the tool bar
I. Add/modify a target device
Figure 3-14 shows the [Device Add/Modify] dialog box.
Figure 3-14 [Device Add/Modify] dialog box
zAdd a target device
Click <Add> on the [Login Management] page (seeFigure 3-11) to bring up the [Device
Add/Modify] page. Set the device name, IP address, port number of the GUI server, and
description of the GUI server. Up to 1000 bytes are allowed in the [Description] field..
The default port of the GUI server is 10999. The port of the GUI server must be identical
with the enabled service port.
zModify the target device information