H3C S3100-52P User manual

H3C S3100-52P Ethernet Switch
Operation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: 20071123-C-1.02
Product Version: Release 1500

Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
[e-mail]
http://www. h3c.com

About This Manual
Related Documentation
In addition to this manual, each H3C S3100-52P Ethernet Switch documentation set
includes the following:
Manual Description
H3C S3100-52P Ethernet Switch
Installation Manual It provides information for the system installation and setup.
H3C S3100-52P Ethernet Switch
Command Manual-Release 1500 It is used for assisting the users in using various commands.
Organization
H3C S3100-52P Ethernet Switch Operation Manual is organized as follows:
Part Contents
0 Overview Introduces the characteristics, services,
and network implementations of
S3100-52P Ethernet Switches.
1 CLI Introduces the command hierarchy,
command view, and CLI features of the
Ethernet switch.
2 Login Introduces the ways to log into the
Ethernet switch.
3 Configuration File Management Introduces configuration file and the
related configuration.
4 VLAN Introduces VLAN and the related
configuration.
5 IP Address and Performance
Configuration Introduces IP address, IP performance, and the related configuration.
6 GVRP Introduces GVRP and the related
configuration.
7 Port Basic Configuration Introduces basic port configuration.
8 Link Aggregation Introduces link aggregation and the
related configuration.
9 Port Isolation Introduces port isolation and the related
configuration.

Part Contents
10 DLDP Introduces DLDP and the related
configuration.
11 MAC Address Table Introduces MAC address forwarding
table management.
12 MSTP Introduces STP and the related
configuration.
13 Multicast
Introduces IGMP Snooping, multicast
MAC address, unknown multicast
packet dropping, and the related
configuration.
14 Routing Protocol Introduces static route configuration.
15 802.1x Introduces 802.1x and the related
configuration.
16 AAA-RADIUS-HWTACACS Introduces AAA, RADIUS, HWTACACS,
and the related configuration.
17 Centralized MAC Address
Authentication
Introduces centralized MAC address
authentication and the related
configuration.
18 DHCP Introduces DHCP-Snooping and the
related configuration.
19 ARP Introduces ARP and the related
configuration.
20 ACL Introduces ACL and the related
configuration.
21 QoS Introduces QoS and the related
configuration.
22 Mirroring Introduces port mirroring and the related
configuration.
23 Cluster Introduces the configuration for cluster
management implemented through
HGMPv2.
24 SNMP and RMON Introduces the configuration for network
device management implemented
through SNMP-RMON.
25 NTP Introduces NTP and the related
configuration.
26 SSH Terminal Service Introduces SSH2.0 and the related
configuration.
27 File System Management Introduces basic configuration for file
system management.
28 FTP and TFTP Introduces basic configuration for FTP
and TFTP, and the applications.

Part Contents
29 Information Center Introduces the configuration for
analyzing/diagnosing a network through
information center.
30 System Maintenance and Debugging Introduces daily system maintenance
and debugging.
31 VLAN VPN Introduces VLAN VPN and the related
configuration.
32 HWPing Introduces HWPing and the related
configuration.
33 DNS Introduces domain name resolution and
the related configuration.
34 Appendix Lists the acronyms used in this manual.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
# A line starting with the # sign is comments.

II. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click
<OK>.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
III. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.