Habitat Karee 336/0761 User manual

Karee
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
03 2020
Issue 1 - 03/02/22

2
Safety and Care Advice
Product Details
Unfinished 312/5250
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp
cloth and mild detergent. Do
not use abrasive cleaners.
•From time to time check that
there are no loose screws, nuts or
bolts. If there are please re-
tighten.
This product should not
be discarded with
household waste. Take to
your local authority waste
disposal centre.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete
should you fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tightend properly.
•This product has been
constructed to be used in the
domestic environment only and not
for commercial purposes.
Assemble the item as
close to its final position (in
the same room) as possible.
Assemble on a soft level
surface to avoid damaging
the unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could
damage the unit. Only use
hand screwdrivers.
Parts of the assembly will
be easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc.

Fittings
3
Phillips screwdriver
(small & medium)
Tools required
A
04 mm x 40 mm X41
measure
Ruler/tape
Drill Heads
Power Drill
A
B
X2
C
03 mm x 16 mm X1
D
06 mm X1
E
X1

Panels
4
Slatted Shelf (245 x 840 mm)
02 x5
Leg (45 x 880 mm)01 x4

5
1
2
Rotate
Product
AA
04 mm x 40 mm X20
A
04 mm x 40 mm X20
01
02
01
02
02
02
02
01
01
02
02
02
02
02
02
01
01
02
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
A
A
A
A
A
04 mm x 40 mm X41
B
X2
C
03 mm x 16 mm X1
D
06 mm X1
E
X1

6
3A
04 mm x 40 mm X1
B
C
D
E
A
A
04 mm x 40 mm X41
B
X2
C
03 mm x 16 mm X1
D
06 mm X1
E
X1
B
X2
C
03 mm x 16 mm X1
06 mm X1
X1
AB
D
C
B
B
B
E
02

A Guide to - Wall Mounting & Fixing
Important note:
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
If plastic wall plugs
are supplied with your
product:
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect fixings is the
responsibility of the installer
.
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualifed
tradesperson if you are unsure.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2:Ensure you use the recommended drill bit to match the wall
plug and hole size.
3:Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4:Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5:Ensure wall plugs are well fitted and are a tight fit in the
drilled hole.
Types of walls You can use one of the following types of wall plug if your
walls are made of brick, breeze block, concrete, stone or wood.
Generally aerated blocks should not
be used to support heavy loads, use
a specialist fitting in this case. For light
loads, general purpose wall plugs can
be used.
For use with plasterboard partitions or
hollow wooden doors.
For use with walls stuck with
plasterboard.
The hammer fixing allows
it to be fixed to the wall rather than the
plasterboard.
Always check the fixing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
For use when fitting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
No.1 “General Purpose” wall plug No.3 “Cavity Fixing” wall plug No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
Care &
Maintenance
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
7