Habitat Kirk Bedside User manual

Kirk
Bedside
Issue 1 - 10/05/22
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
Regularly check and ensure that all bolts and fittings are tightend properly.
Maximum loading weight 27kg.
This product is compliant EN14749,BS4875-7.
Any additional or replacement parts are obtained from the manufacturer.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assemble the item as close
to its final position (in the same
room) as possible.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Kirk 1 DRW Bedside 3205912 Walnut
Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast,
United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.
Kirk 1 DRW Bedside 6793775 Oak

Bag 1
Fittings (Shown to scale)
2
AB
32mm Metal Dowel x16 Locking Nut x16 30mm Wooden Dowel x10
35mm Screw x4
DEF
C
30mm Screw x1 25mm Handle x1
G
Ø15mm Foot Pad x 4

3
Tools required
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium)

Top Panel x1
(450 x 400mm)
1
Panels
4
Side Panel x2
(380 x 144mm)
2
Bottom Panel x1
(450 x 400mm)
3
Back Panel x1
(422 x 154mm)
4
(350 x 130mm)
6
Drawer Front x1
(448 x 138mm)
5
Left Side Drawer x1 Right Side Drawer x1
(350 x 130mm)
Drawer Bottom Panel x1
(372x 343mm)
9
7
Drawer Back x1
(362 x 130mm)
8

1
5
A
32mm Metal Dowel x16
A
1
3
6
2 x2
30mm Wooden Dowel x10
C
7
5
C
AB
32mm Metal Dowel x16 Locking Nut x16 30mm Wooden Dowel x10
35mm Screw x4
DEF
C
30mm Screw x1 25mm Handle x1
G
Ø15mm Foot Pad x 4
Peel off
the back
12G
Ø15mm Foot Pad x 4
Gx4
GG
3

2
6
3
B B
Locking Nut x 6
B
3
2
2
4

4
7
1
B B
Locking Nut x 6
B
Locking Nut x 4
B
B B
9
5
6
7
5

6
7
8
E
30mm Screw x1
F
25mm Handle x1
35mm Screw x4
D
E
F
D
D
8

9
Assembly is complete.
8