Habitat PEIO 3441013 User manual

PEIO
Issue 1 - 20/04/22
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
Peio cane 3Drw chest 2151744 Black
Peio cane 3Drw chest 3441013 Oak
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
Regularly check and ensure that all bolts and fittings are tightend properly.
•
This product is compliant EN14749,BS4875-7.
Any additional or replacement parts are obtained from the manufacturer.
·This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assemble the item as close
room) as possible.
to its final position(in the same
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Maximum loading weight 50kg.
Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast,
United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.

Bag 1
Fittings (Shown to scale)
2
A
CD
30mm Dowel x 18
E
G
35mm Screw x 14
B
Ø25mm Foot Pad x 4
Metal Dowel x38
Locking Nut x38
12mm Screw x 23
15mm Screw x 2
F
I
L Shap Bracket x 2
H
Pad x 3
30mm Dowel x 6
J

3
Tools required
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium) Eye protection
(when using a
hammer or glue)
Pencil
Mallet
Set Square
Spirit Level
Ruler/tape
measure
Power Drill
Drill Heads
Ladder

Panels
4
Top Panel x 1
(863x 383mm)
1
Drawer Bottom Panel x 3
(756x 298mm)
16
9
12 13
14
Drawer Top Front x 1
(856 x 244mm)
Drawer Left Side x 3
(305 x 180mm)
Drawer Right Side x 3
(305 x 180mm)
Drawer Back x 3 (741 x 180mm)
Left Side Frame x 1
(813 x 360mm)
23Right Side Frame x 1
(813 x 360mm)
Rail (796 x 60mm) x 1
4
Rail (796 x 30mm) x 36
Back Panel x 1 (815 x 375mm)
8
10 Drawer Middle Front x 1
(856 x 244mm)
11 Drawer Bottom Front x 1
(856 x 244mm)
15 Drawer Rail x 3
(285 x 55mm)
Back Panel x 1 (815 x 375mm)
7
Rail (796 x 60mm) x 2
5

5
1
3
2
11
10
12 x3
6 x3
9
B
Metal Dowel x34
E
30mm Dowel x 18
G
Ø25mm Foot Pad x 4
E
Peel off
the back
1
2
G
G
Gx4
B
13 x3
15 x3
14 x3
A
CD
30mm Dowel x 18
E
G
35mm Screw x 14
B
Ø25mm Foot Pad x 4
Metal Dowel x38
Locking Nut x38
12mm Screw x 23
15mm Screw x 2
F
I
L Shap Bracket x 2
H
Pad x 3
30mm Dowel x 6
J
30mm Dowel x 6
J
J
J
4
J

6
2
3A
Locking Nut x 8
A A
B
Metal Dowel x4
15mm Screw x 2
F
I
L Shap Bracket x 2
B
1
F
I
3
5
5
6
6
6
4

7
4
5
Turn
Product
A
Locking Nut x 8
2
A A
A A
A
Locking Nut x 4
1

8
6
7A
Locking Nut x 15
Rotate
Product
7
D
12mm Screw x 23
D
x3
9
10
11
12
9
13
A A
15
8
H
Pad x 3
D
H

9
9
8C
35mm Screw x 12
x3
16
14
C
9
10
11
A
Locking Nut x 3
A A

10
10
WARNING!
C
35mm Screw x 2
C

Assembly is complete. 11
11

Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug Heavy
loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty” wall
plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist fitting in this case. For light
loads, general purpose wall plugs can be
used.
For use with heavier loads such as TV &
HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when fitting or supporting heavy
loads such as shelving, wall cabinets and
coat racks.
For use with walls stuck with plasterboard.
The hammer fixing allows it to be fixed
to the wall rather than the plasterboard.
Always check the fixing is secure to the
retaining wall.
For use when attaching light loads on to
plasterboard partitions.
Safety: Always check the fitting and
location to ensure your safety in and
around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic tiles.
Ensure wall plugs are inserted beyond the thickness of the ceramic
tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well fitted and are a tight fit in the
drilled hole.
Wall Fixings: Make sure that the screws and wall plugs being used are suitable
for supporting your unit. Consult a qualified tradesperson if you are
unsure.
- because of the variety of
different wall types, Habitat
cannot provide you with the
exact fixings you will need to
fix this product to the wall.
You must first identify the
type of wall you intend to fix
product onto and then contact
your local hardware store to
get the appropriate fixings.
A Guide to - Wall Mounting & Fixings