Habitat Parker Extending Table User manual

Assembly Instructions - Please keep for future reference
Dimensions
Important – Please read these instructions before assembly
If you need help or have damaged or missing parts, email:
customer[email protected]o.uk or call: 0344 499 4686
Parker Extending Table
Width - 200/275cm
Depth- 100cm
Height - 75cm
1 2 1
PARK-ET-SS18-A

Max.
50kg
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
If for any reason you should have
problems with your Habitat product,
please contact the store from which
you purchased it.
Please retain your receipt as proof of
purchase.
If you have any comments or
suggestions regarding this product,
assembly instructions or service
received, please contact the store or
Habitat Head Office via its website:
www.habitat.co.uk
or write directly to: Habitat Retail Ltd.
489-499 Avebury Boulevard,
Milton Keynes MK9 2NW
General information
Check you have all the
components and tools listed on the
front cover and pages 2 - 3.
Remove all fittings from the plastic
bags and separate them into their
groups.
Keep children and animals away
from the work area, small parts
could choke if swallowed.
Make sure you have enough space
to layout the parts before starting.
Do not stand or put weight on the
product, this could cause damage.
Assemble the item as close to its
final position (in the same room) as
possible.
Do not place furniture directly in
front of radiators, fires or any other
source of heat.
Parts of the assembl y
will be easier with 2
people.
Assemble on a soft level surface
to avoid damaging the unit or your
floor.
We do not
recommend the
use of power drill/
drivers for inserting
screws, as this could
damage the unit. Only use hand
screwdrivers.
Dispose of all packaging carefully
and responsibly.
General care and maintenance
Dust regularly with a clean dry cloth.
Wipe up any spills immediately with
a damp cloth and then dry the surface
with a clean dry duster.
Repeat this procedure for periodic
cleaning.
Remove stubborn stains with a weak
washing up liquid solution and a damp
cloth and dry after with a clean cloth.
1 2
Important: Recommended
maximum load is shown below.
Maximum weight limit
2
Max.
100kg
Max.
50kg
Take care when moving furniture -
dragging it across the oor will loosen
and damage the joints. Always lift and
move.
From time to time check that there are
no loose ttings. Tighten as necessary.
Avoid exposing your furniture to direct
and prolonged periods of sunlight and
heat sources as fading and cracking
may occur.
Take care to prevent sharp objects e.g.
toys, buckles and heels from coming i
nto contact with your furniture,
and avoid contact with chemicals e.g.
cosmetics or hair products which may
permanently mark the surface.
Cleaning and care
The use of furniture polish or spray
is not necessary or recommended.
Never use abrasive or corrosive
cleaning agents.
Always use place mats and coasters
to protect the surface from moisture
and heat.

BC Note: There are ‘Batch Code’ lables where shown on the indicated items, these should beretained.
Components - Panels
Please check you have all the panels listed below
If you need help or have damaged or missing parts, email:
customerservic [email protected] o.uk or call: 0344 499 4686
3
1. Tabletop 5. Connector
3. UpperCrossbar 4. LowerCrossbar
1 of 2
2. Legs
2 of 2

Please check you have all thefixings listed below
Note: The quantities below are the correct amount to complete the assembly. In some
cases mor e fittings may be supplied than are required.
Components - Fittings
Ruler - To help correctly identify thefixings
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 11 0 115 120
105
If you need help or have damaged or missing parts, email:
customerservic [email protected] o.uk or call:
0344 499 4686
0344 499 4686
4
1 of 2
Wooden dowels x 10
AB
Tread pin x 6
C
Washer x 6
D
Metal threaded nuts x 6
E
Metal spanner x 1
F
XXXXXX x 2
G
Joint connector x 2
H
Metal allen key x 1
I
Cover cap x 2
J
Metal screw x 3

5
Assembly Instructions
Step 1
Step 2
3
Ax4
Ax2
4

6
Assembly Instructions
Step 3
Step 4
Bx6
1 2 1

7
Assembly Instructions
Step 5
Ax4
Jx3

8
Assembly Instructions
Step 6
Ex1
Dx2
Cx2

1 2 1
9
Assembly Instructions
Step 7
Ex1 Dx4 Cx4 Ix2
Hx1 Gx2 Fx2

10
Assembly Instructions
Step 8
Step 9
1 2 1