Hafele Ironfix 568.60.780 User manual

Ironfix®Shelf-mounted
Item No.: 568.60.780
Mounting Instructions
Stored Position
520 mm
(20 1/2”)
300 mm
(11 13/16”)
350 mm
(13 3/4”)
Extended & Rotated Position
180º
340 mm
(13 3/8”)
Extended Position
952 mm
(37 1/2”)
1290 mm
(50 25/32”)
250 mm
(10”)
610 mm
(24”)
A
Diagram
130 mm
(5 1/8”)
Important Notes:
• Before mounting the Ironfix, it is the end users responsibility to assure that the Cabinet and Shelf are securely
affixed, can adequately support the Ironfix when it’s extended, and weight of “ironing” is applied.
• Häfele recommends a ¾” (19 mm) thick shelf.
• Do not rely solely on RTA connectors or shelf supports/pins to support this item.
• Specifically included in this kit are 6 pcs. angle brackets and screws which we suggest are used, see Diagram B.
• Ironfix must be mounted on shelf via through holes using provided bolts.
• Use only as an ironing board for clothes! Unsafe for use as a seat, step, or table - misuse may cause serious injury.
Parts List:
1 pc. Ironfix unit
1 pc. mounting template
4 pcs. M6 bolts
6 pcs. angle brackets
24 pcs. #8 x 5/8” screws
Important Dimensions, see Diagram A below
Fits into a 24” wide x 14” deep space
Height: 130 mm (5 1/8”)
Width: 520 mm (20 1/2”)
Depth: 350 mm (13 3/4”)
Extended board length: 952 mm (37 1/2”)

3901 Cheyenne Drive
P.O. Box 4000
Archdale, NC 27263
1-800-423-3531
www.hafele.com
DROP-DOWN
FRONT
SIDE PANEL
DROP-DOWN
FRONT
SIDE PANEL
4 pcs. M6 BOLTS
6pcs. ANGLE
BRACKETS
HINGE AND
MOUNTING
PLATE
3/4” THICK SHELF
14”
24”
SHELF
B
Diagram
Instructions:
1. Use included template to mark and drill 4 places ¼” (6.5 mm) diameter through holes in shelf.
2. Be sure shelf is securely fastened by using included angle brackets and screws, see important notes on
previous page and Diagram B below.
3. Attach Ironfix to shelf via through holes using included bolts.
4. Attach drop-down front, see below for suggestions.
To attach Drop-Down Front, Häfele recommends using Concealed Cup Hinges for adjustability.
Exact location of hinges, dimension of drop-down front, overlay, etc. – to be performed by trial and error.
• For a flat panel front, Hafele can suggest hinge item 329.17.507 and mounting plate Item 329.71.500.
• For raised panel fronts, Hafele can recommend a thin cup hinge item 329.28.500 and mounting plate item 329.71.500.
• For complete details, and other hinge options please see The Complete Hafele Catalog.