Haier HPC12XCR User manual

Installation and User Manual
Instructions d’installation et
Guide de l’utilisateur
Instrucciones de instalación y
Manual del usuario
HPC12XCR
HPC12XHR
Portable Air Conditioner
Climatiseur portatif
Acondicionador de aire portatil
49-7822
11-17 GEA

TABLE OF CONTENTS
ENGLISH
1
RECORD KEEPING
Thank you for purchasing this Haier product. This user manual will
help you get the best performance from your new air conditioner.
For future reference, record the model and serial number located on
the label on the side of your air conditioner, and the date of purchase.
Staple your proof of purchase to this manual to aid in obtaining war-
ranty service if needed.
_______________________________________
Model number
_______________________________________
Serial number
_______________________________________
Date of purchase
AIR CONDITIONER SAFETY ................................................................................. 2
PARTS AND FEATURES...................................................................................... 3
INSTALLATION REQUIREMENTS ............................................................................ 4
Tools and Parts ..............................................................................................4
Location Requirements ..................................................................................... 4
Electrical Requirements......................................................................................4
INSTALLATION INSTRUCTIONS ............................................................................. 5
Step 1 - Unpack Air Conditioner ..............................................................................5
Step 2 - Install Exhaust ...................................................................................... 5
Step 3 - Install Window Panel ................................................................................. 6
Step 4 - Attach Exhaust Hose to the Exhaust Nozzle ..........................................................6
Step 5 - Complete Installation............................................................................... 6
CONTROL PANEL........................................................................................... 7
Buttons .................................................................................................... 7
Remote Control ............................................................................................ 8
AIR CONDITIONER USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AIR CONDITIONER CARE ................................................................................... 9
Cleaning ....................................................................................................9
Air Filters....................................................................................................9
Internal Water Tank ..........................................................................................9
Storage .....................................................................................................9
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
LIMITED WARRANTY ......................................................................................11
RECORD KEEPING ......................................................................................... 1

IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock, injury to persons, or damage when using the air conditioner,
follow basic precautions, including the following:
• Read all of the instructions before using this appliance.
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Do not operate the air conditioner if it has a damaged
cord or plug, if it is not working properly, or if it has been
damaged or dropped.
• The air conditioner should be serviced only by qualied
service personnel. Call an authorized service company
for examination, repair, or adjustment.
• Disconnect power before servicing.
• Disconnect power before cleaning.
NOTE: Turning o power by pressing the Power button
does NOT disconnect the appliance from the power supply.
• Do not install or use the air conditioner in any area where
the atmosphere contains combustible gases or where the
atmosphere is contaminated. Avoid any chemicals coming
in contact with your air conditioner.
• Do not store anything directly on top of the air conditioner.
• Use two or more people to move and install air conditioner.
• Never operate the air conditioner without the lters in
place.
• Do not use the air conditioner near a bathtub, shower or
wash basin or other wet area.
READ AND SAVE THESE INSTRUCTIONS
AIR CONDITIONER SAFETY
ENGLISH
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will
follow the safety alert symbol and either the word “DANGER,” “WARNING” or “CAUTION.”
These words mean:
DANGER
WARNING
CAUTION
An imminently hazardous situation. You could be killed or seriously injured if you don’t
immediately follow instructions.
A potentially hazardous situation which, if not avoided, could result in death or serious
bodily injury.
A potentially hazardous situation which, if not avoided, may result in moderate or minor
injury.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.
2

1. Air Outlet
2. Control Panel
3. Casters
4. Air Filter
5. Handle
6. Upper Drain
7. Power Cord
8. Lower Drain
NOTE: Please ensure if the water outlet drain is well
installed before use.
Power Cord
TEST: When this button is pressed or when there is a
current leak, the unit will not operate.
RESET: After resolving the problem, press the reset
button to resume operation.
PARTS AND FEATURES
ENGLISH
3
1
2
3
4
5
6
7
8

RESET
TEST
POWER SUPPLY CORD
Wiring Requirements
• 115 Volt, 60Hz, 15-amp fused grounded 3 prong outlet
• The use of a time-delay fuse or time-delay circuit breaker
is recommended.
• Use a dedicated circuit only.
NOTE: Do not operate any other electrical appliances on
this circuit or you may trip the circuit breaker/fuse.
If this power supply cord is damaged, it cannot be repaired. It
must be replaced with a cord from the product manufactur-
er. If the power supply cord is damaged call Haier Customer
Service: 1-877-337-3639.
To test the power supply cord before operation:
1. Plug the power cord into a grounded 3 prong outlet.
2. Press the Test button, and then press and release the
Reset button to restore power.
REQUIRED GROUNDING METHOD
This air conditioner must be grounded. The air conditioner is
equipped with a power supply cord that has a 3 prong grounding
plug. The power supply cord must be plugged into a mating,
grounded 3 prong outlet, and grounded in accordance with all
local codes and ordinances.
115V
15 Amp
INSTALLATION REQUIREMENTS
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord
plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical
shock.
ELECTRICAL REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting
installation.
PARTS SUPPLIED
Exhaust Hose
Hose Connector Hose Connector
Cover #5 Window Panel and
Extension Panel (3)
LOCATION REQUIREMENTS
• Place the air conditioner on a at, level surface in a
location that is at least 20” (51 cm) from any wall.
NOTE: The recommended distance from the window for
optimal performance is 31.5 inches.
• Maintain a minimum 20” (51 cm) clearance around the air
conditioner to not block airow.
• Keep the air conditioner free of any obstructions such as
drapes, curtains, blinds, etc.
• The exhaust hose should be free of any obstructions.
• Do not place the air conditioner on an unstable or raised
surface because it could fall and cause damage or injury.
• Do not place the air conditioner in direct sunlight or near
a heat source such as baseboard heaters, stoves, etc.
• The window panel can be installed in a window with a
minimum 20” (51 cm) to a maximum 40” (101.6 cm)
opening.
ENGLISH
4

INSTALLATION INSTRUCTIONS
ENGLISH
5
WARNING
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
STEP 1 - UNPACK AIR
CONDITIONER
• Remove packaging materials. Save the carton and the foam
packaging for storing the air conditioner when not in use.
NOTE: There are NO packing materials inside the
air conditioner to remove—Do Not open the cabinet.
• Properly dispose of/recycle all packing material.
• Handle the air conditioner gently.
• Keep the air conditioner upright and level. Do not set the air
conditioner on its side, front, back or upside down.
STEP 2 - INSTALL EXHAUST
1. Connect the connectors #2 and #3 to two sides of exhaust
hose #1 to create an exhaust assembly.
2. Sliding in one end of hose assembly (with hose connector
#2) to rear panel.
Then push the knob to x the hose assembly rmly.
2 1 3

INSTALLATION INSTRUCTIONS
ENGLISH
6
STEP 4 - ATTACH EXHAUST HOSE
TO THE EXHAUST NOZZLE
1. Insert the other end of the exhaust hose assembly (with
hose connector #3) onto the window bracket.
STEP 3 - INSTALL WINDOW PANELS
1. Insert the window panel B and C to each end of the main
panel A. Adjust to x the length of window
2. Open the window and place window panels into window.
Adjust the extension panels to t width or height of window
by the screw and nut sets mounted on the main panel A.
C A B
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or
electrical shock.
STEP 5 - COMPLETE INSTALLATION
1. Plug the power cord into a grounded 3 prong outlet.
2. Press the Reset button on the power cord to ensure the
safety plug is providing power to the air conditioner.
3. Allow 8” of space around the unit for proper air
circulation.
4. When removing the portable air conditioner for storage,
the window panel may be left in place. Simply place the
cover (#5) over the hole on the window panel.

ENGLISH
7
CONTROL PANEL
BUTTONS
A Power On/O
B. Mode
Press this button to change the operation mode.
COOL: LED lights when in cooling mode.
DEHUM: LED lights when in dehumidication mode.
FAN: LED lights when in fan mode.
HEAT: LED lights when in heat mode (applies only to heat
and cool models).
C. Fan Speeds
Select between multiple fan speeds. Number of fan
speeds vary by model.
In Dehumidication mode, and room temperature is
greater than 77°F, fan speed can be adjusted, otherwise
fan speed is xed to Low.
D. On/O Timer
The timer can be used to automatically turn on or o the
air conditioner.
To automatically turn on the air conditioner, set the timer
while the power control is in the OFF position.
1. Turn o the air conditioner
2. Press the Timer button.
3. Press the ˄or ˅button to change the delay start time
from 1 to 24 hours.
To automatically turn o the air conditioner, set the timer
while the power control is in the ON position.
1. Turn on the air conditioner
2. Press the Timer button.
3. Press the ˄or ˅button to change the delay stop time
from 1 to 24 hours.
To clear the timer setting.
1. The power control can be either in the on or o position.
2. Press the Timer button.
3. Press the ˅button until the timer display has been
cleared.
E/F. Setting the Temperature
The ˄or ˅buttons can be used for adjusting the timer and
temperature settings.
To set the timer: see “On/O Timer” instructions.
To set the temperature : While in the COOL mode, press
the ˄or ˅button to raise or lower the temperature. The
set temperature is displayed and may be adjusted. The
temperature can be set between 61°F and 89°F (Cool
mode) and 61°F to 77°F (Heat mode). After 10 seconds
the display will revert back to the room temperature. Press
+ and - simultaneously to switch between °F and °C.
G. Bucket Full
When the “Bucket Full” indicator light ashes, the internal
water tank has lled with condensed water and the air
conditioner will turn o automatically. See the “Storage”
section for directions on draining the water from the air
conditioner.
A B C
D E F G

CONTROL PANEL
ENGLISH
8
REMOTE CONTROL
1. Power On/O
2. Mode
Cool: LED lights when in cooling mode.
Dehumidication: LED lights when in dehumidication
mode.
Fan: LED lights when in fan mode.
Heat: LED lights when in heat mode (applies only to heat
and cool modes).
3. Fan Speeds
Select between multiple fan speeds. Number of fan
speeds vary by model. In dehumidication mode, and
room temperature is greater than 77°F, fan speed can be
adjusted; Otherwise fan speed is xed to “low”.
4. On/O Timer
To set the timer for a 1- 24-hour delay until the air condi-
tioner turns o:
1. When you use the timer setting button while the unit is
operating, you can preset a time for the unit to turn o.
2. When you use the timer setting button while the unit is
on standby, you can preset a time for the unit to turn on.
3. If you press the “ON/OFF” button, the preset timer
function will be canceled.
4. Timer setting range is 1-24 hours.
To clear Timer Delay program:
NOTE: Air conditioner can be either on or o.
1. Press the Timer Button.
2. Press and hold the minus button until the timer display
has cleared.
To change the remaining time (in hours):
1. Press the Timer Button.
2. Press the plus or minus button to change the delay time
from 1 to 24 hours.
3. The new delay time will display.
5. Setting the Temperature
To set the temperature, press the ˅or ˄keys to raise or
lower the temperature. The temperature can be raised
or lowered in the cool mode. The temperature cannot be
adjusted in fan or dehumidication mode.
NOTE; The temperature can be set between 61°F to 89°F
(Cool Mode) and 61°F to 77°F (Heat Mode) .
1
2
3
4
5