Haier HSU-09RA03 User manual

No.0010548538

Vertical flap
Healthy/oxygen
operation indicator
Oxygen coupling
hose(outdoor)
Oxygen coupling
hose(indoor)
OXYGEN COUPLING HOSE

w
OXYGEN
28
33
34
36
37
19
35
OXYGEN display
36.
37.

HEALTH and OXYGEN operation
Press OXYGEN button. For each press, is displayed
and the oxygen bar function starts.
Press OXYGEN button. the oxygen bar function stops.
Oxygen bar function
OXYGEN
The anion generator in the air conditioner can generate a lot of anion to effectively balance the quantity
of position and anion in the air and also to kill bacteria and speed up the dust sediment in the room
and finally clean the air in the room.
Note: When the air conditioner runs the health function or
oxygen bar function, the health/oxygen bar indicator
lamp on the control panel lights up.
Note: When the fan in the indoor unit does not work, the
health lamp light up,but the anion generator does not
release anion.
After the oxygenation begins, the oxygenation device makes use of dissolution and diffusion
velocities of the main components in the air -- oxygen and nitrogen molecules in the oxygen
enrichment membrane to change the concentration ratio of the oxygen and nitrogen in the air to
increase the oxygen concentration in order to supply oxygen-rich fresh air to the indoors.
Setting the oxygen bar function under the shutdown status:
Under shutdown status, press the oxygen bar key and the remote controller displays the on status
of air flow, low wind, and oxygen bar function functions, and now can set the timing open, timing
close and time control switch.
Press on-off key to cancel the oxygen bar function.
BRIEF INTRODUCTION TO HEALTH OPERATION
ABOUT OXYGEN BAR FUNCTION
1.
2.

OXYGEN