Haier 29FV6 User manual

29FV6 34FV6
Please READ this manual carefully before operating
the unit, and keep it for future reference.
COLOR TV RECEIVER
OWNER'S MANUAL

* For your enjoyment of this TV set, please read this manual carefully and
keep it good for future reference.
CONTENTS
Before Operation
Basic Operation
Technical operation
Warning and cautions................................................................................................1
Installation...............................................................................................................2
Antenna connection...............................................................................................2
Preparation for theremote control ..........................................................................2
Position of Buttonand Plug-ins...................................................................................3
Front and sidepannel.............................................................................................3
Back pannel..........................................................................................................3
Function button ofthe remote control..........................................................................4
The screen display menu...........................................................................................5
Switch on/off the TV set.............................................................................................6
Watching TVprograms..............................................................................................7
Watching TVprogram............................................................................................7
Tuning.....................................................................................................................9
Auto search..........................................................................................................9
Search................................................................................................................10
Fine tune.............................................................................................................11
Skip unnecessary channel....................................................................................12
Exchange programs.............................................................................................13
Convenient picture andsound controls......................................................................13
Select the picturemodes and setthe picture quality.................................................14
........................................................16
Time setup function.................................................................................................17
Clock and on/off time functions..............................................................................17
Set up function.........................................................................................................19
External connections...............................................................................................33
Video/Audio output connection,VGA input..............................................................33
Video/Audio input connection................................................................................34
Others
Trouble shooting......................................................................................................35
Specifications..........................................................................................................36
Program swap andauto scan functions....................................................................8
Select the soundmodes and setthe sound quality...................................................15
Set sound effect, surround and mute functions
Sleep and remindProg. Function...........................................................................18
Screen saver functionand select themenu language...............................................19
Time skipand select switchon mode.......................................................................20
HDMscan function andSVM function......................................................................21
DNR function andComb filter function.....................................................................22
Tilt functionand Digital Bassfunction......................................................................23
Mark Six function..................................................................................................24
Chinese Jumper function.......................................................................................25
Paint function.......................................................................................................26
Calendar and World clock function.........................................................................27
Cslculator and screendisplay function...................................................................28
Setting the lock........................................................................................................29
Change your password..........................................................................................29
Setting the lock.....................................................................................................30
Others functions......................................................................................................31
Shuttle and favoritefunctions................................................................................31
VGA inputadjustment...........................................................................................32

Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. Do not place the TV set near rain or
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TV set must only
be used in dry in
door locations.
2. In order to prolong the using life of
the TV set, please place it in a well
ventilated location.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
3. Don't place the
TV set in direct
sunlight or near a
heat source.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
Explanation on the display tube
Should the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleanser or abrasive cloths.

Installation
Antenna connection
General speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
(additional purchase)
75 coaxial cable
Plug
(additional purchase)
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
AC power socket
Note
It is recommended that you'd better use 75
Don't bind antenna cable and electric wire together.
coaxial cable to remove the
disturbance caused by airwave.
Preparation for the remote control
* the plug type may vary
depending on the model.
Battery installation
Take off the battery compartment cover. Place two AAbatteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Avoid dropping the remote control and/or getting it wet.
Never place batteries in a fire.

Side AV terminal
S-video input terminal: Special video S-VIDEO AUDIO: L/MONO Track L/MONO ,R Track R
AV output terminals: VIDEO AUDIO L/MONO Track L/MONO ,R Track R
AV2 input terminals MONITOR : VIDEO AUDIO :L/MONO Track L/MONO ,R Track R
Av1 input terminals MONITOR :VIDEO AUDIO :L/MONO Track L/MONO ,R Track R
DVD component terminals:
Interleaved signal Y CbCrAUDIO L/MONO Track L/MONO ,R Track R
Progressive signal YPbPrAUDIO L/MONO Track L/MONO ,R Track R
HDTV input terminals: YPbPrterminal AUDIO L/MONO Track L/MONO ,R Track R
29FV6 , 34FV6 Model
VGA input terminal
29FV6 Model
Position of Buttons and Plug-ins
Front and Side panel
MENU
Volume up/ down
Channel position up/down
TV/Video
(input selector
Infrared receiver
Power indicator
Power switch
Back panel
34FV6 Model
Antenna input
AV output terminals
AV2 input terminals
AV1 input terminals
DVD component terminals
HDTV input terminals
S-video input terminal
VGA input terminal
Antenna input
AV output terminals
AV2 input terminals
AV1 input terminals
DVD component terminals
HDTV input terminals
S-video input terminal
1.When the S-video terminal and the Video 1 terminals are connected
at the same time, the S-video terminal is preferential.
2.When the side AV is connected, please select the Video 2 terminal.

Mute button
I/II select button
Picture still button
Screen call/help button
HDM select button
Program scan button
Direct
Digital
Program swap button
Picture mode selection button
Sound mode selection button
Program
Menu call/select button
Select menu, call and exi
Picture menu call/game direction select
Sound menu call/game direction select
Favorite program button
Shuttle button
Function menu call/game menu select
Tune menu call/game confirm
Zoom select button
Time skip button
Time menu call button
Calendar/amusement function exit button
Hotel lock button
Digital album No available
To eliminate the sound of the programs
DC standby and power button
TV and AV exchange button
A changeover between TV and other
input signals like AV
select button
Select a TV channel directly
selection button
Changeover from one digital, two
digital and three digital
Volume adjustment button
adjustment button
ZOOM
CAL./EXIT
MUTE TV/AV POWER
HDM SCAN CALL/HELP
P.STD S.STD
CH+
CH-
VOL- VOL+
MENU
PICTURE
FUNCTION TUNE
SHUTTLE
FAVORITE
SOUND
STILL
SWAP
T.SKIP
TIME H.LOCK D.ALBUM
Function Buttons of the Remote Control
Function buttons of the remote control

Picture menu
TIME
Clock 18:18
On Time --:--
On Prog. ---
Off Time --:--
Sleep 0
Remind Time --:--
Remind Prog. ---
Lock Menu
New PW. ....
Tuning Lock OFF
Preset Prog OFF
Video Lock OFF
Child Lock OFF
Max Volume 100
Unlock
Sound
Tuning
Function
Brightness
Contrast
Color
Sharpness
Hue
Color Temp.
Picture
Sound
Tuning
Function
Picture
Treble
Bass
Balance
Sound Effect
Surround ON
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Sound
Tuning
Function
Picture
Language English
Color Sys. Auto
HDM Scan
Digital Plus
Amusement
Special
The Screen Display Menu
For your convenienceof operation, herelists the screen display menus of this model
as your reference.
Sound menu
Tuning menu Function menu
Time menu H.lock menu
Note:
When the TV set ispowered on, theremight be different from what have been
illustrated above. Pleasedo some adjustmentas follows tomeet your needs.
1. Press theMENU button toselect the menuin the mainmenu: PICTURE,
SOUND, TUNING and FUNCTION. Off course, youmay select thesemenus directly
by pressing thePICTURE, SOUND, TUNE and FUNCTIONbuttons on theremote
control.
2. If youneed adjust thenumerical value ofthe TIME and H.LOCK menu,press the
TIME and H.LOCKbutton on theremote control tocall the menu.
3. Press theCH+/- buttons toselect the desireditem, press theVOL-/+buttons to
adjust the numericalvalue.
4. If itis in sub-menu,press the VOL-/+buttons to enterthe sub-menu. Then press
the CH+/- toselect the desireditem, press theVOL-/+buttons to adjust the numerical
value. Afterthat, press theMENU button twiceto return themain menu.
5. If youwant exit themenu, press theMENU button repetitiously.

MENU
Volume up/ down
Channel position up/down
TV/Video
(input selector
3
B/G
144MHz
NORMAL
POWER
Switch on/ off the TV set
In the following, the methods of using power switch and remote control to switch on/off
power supply for the TV set will be explained.
Switch on/ off the TV set
Infrared receiver
Power indicator
Power switch
Switch on/ off the TV set
1.Connect the power supply wire. Then press the power
switch button, the power indicator will light, in several
seconds the picture will display on the screen.
2. If the TV is in the state of standby, press the POWER
button or the CH+/- buttons on the remote control.
Note:
1. Press the P+/- buttons which is on the TV set to get
out of the standby state when the remote control is not
in use.
2. Press the POWER button onthe remote control
to the standbymode.
3. Press the power button onthe TV set to
completely power off the TV.
4. To eliminate themagnetization completely, the
TV set degaussesautomatically. There is the
sound ofPENG, itis natural.
Automatic stand by function
When the SCREEN SAVER is ON, If no signal has
been received, and after five minutes, it will stand by
automatically. If the SLEEP has been used, the SLEEP
function is priority. When the
Automatic stand by function is no available.
When it is AV status, the TV set will enter the screen
saver, after 5 minutes turn to stand by automatically .
SCREEN SAVER is OFF,
the

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
FUNCTION Sound
Tuning
Function
Picture
Language English
Color Sys. Auto
HDM Scan
Digital Plus
Amusement
Special
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Watching TV Programs
Watching TV programs
How to select the TV program
Select the desired program
1. Use thedirect number selectionbutton
2. Use the CH+/- buttons
Press the CH+ button to select the channel of the larger number.
Press the CH- button to select the channel of the smaller number.
Press the button from 0-9 to select a one-figure channel.
If you want to select a double figures channel, press the
figure-selection button and change it into two-figure mode, then
press the number of the channel.
If you want to select a three figures channel, press the figure-selection
button and change it into three-figure mode, then press the number
of the channel.
TIP: When the channel is stored, then the program number
is yellow. When the channel is empty, then the program
number is red.
Select the desired sound
Press the VOL+/- buttons to adjust the volume to your need.
If the colour or sound of a certain channel is
abnormal
If the TV set youbought is
abnormal in colouror sound ina
certain channel, itmight be
because the colouror sound
system has beenset improperly.
You may follow the instruction
below to adjustit. Press the
FUNCTION button, andyou can
see the form.
If the colourof the pictureis abnormal
Press the CH+/- buttons to move the indicator to "Color Sys.", and
press the VOL+/- buttons to select the proper colour.
Press the CH+/- buttons to move
the indicator to "Sound Sys.", and
press the VOL+/- buttons to select
the proper sound. (If the TV set you
bought had multi-system, then
will appear alternately.)
D/K,
M, B/G and I
If the soundis abnormal

CH+
CH-
VOL- VOL+
MENU
SWAP
SCAN
18
B/G
144MHz
NORMAL
8
B/G
144MHz
NORMAL
18
B/G
144MHz
NORMAL
Watching TV Programs (continued)
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of the programs in memory
with (There are 12 pictures display on the screen at the same time)."OFF" skip status
Program swap and auto scan functions
Program swap
1. Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2. If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3. If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1. Press the SCAN button to
scan through all the memorized
TV channels. The TV set screen
displays 12 pictures at the same
time. Press the S.STD button to
scan next page, and press the
P.STD to scan last page.
2.Press the CH+/- buttons and
VOL-/+ buttons to select the
program that you desired, and
press the MENU button to
confirm.
2
22
1

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Auto Search
Select the search mode
FUNCTION
TUNE
Sound
Tuning
Function
Picture
Language English
Color Sys. Auto
HDM Scan
Digital Plus
Amusement
Special
Time Skip 00:20
Search Mode I
Curtain Mode OFF
Screen Saver ON
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Auto Search I 001
125.00MHz
The TV set has three methods to set the channels, which are Auto search, Search and Fine tune.
In this section, how to use the remote control to set the channel is explained. You can also use the buttons
on the TV set to set channel.
Tuning
1. Press the FUNCTION button, the
function menu will appear on the
screen.
2. Press the CH+/- buttons to move
the indicator to "Special ", then
press the VOL+ button to sub-menu.
. Press the CH+/- buttons to
move the indicator to " ", then press the VOL+ button
to select the desired auto search mode.
Auto search
1. Press the TUNE button, the tuning
menu will appear on the screen.
( For example, the auto search mode I.)
3. Press the VOL+ button, and
"Auto Search" mode I will work.
The TV set will search
automatically all available programs,
after search is finished, all available
programs will be stored in turn.
If you wantto stop thesearch,
just press theMENU button.
The order ofthe automatic searchis due to the frequency of
the program, generallyspeaking, it isused only the first time
you search theprogram, and afterthe order of the program
has been made,you don't haveto use thisfunction,
otherwise the orderof the programwill be mixed.
TIP: To eliminate the reorder for misapplying, you can set the
"Tuning Lock" of the Lock Menu to ON the order of the
program. (Refer to the page 30)
after
2. Press the CH+/- buttons to move
the indicator to " Auto Search ", then
press the VOL+ button to sub-menu.

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Search
TUNE
CALL/HELP
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Search 001
125.00MHz
Tuning (Continued)
Search
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number.
2. Press the TUNE button, the tuning
menu will appear on the screen.
( For example, the auto search mode I.)
. Press the CH+/- buttons to
move the indicator to "Search".
4. Press the VOL+ or VOL- buttons,
the TV set will begin to search up or
down, when the TV set has searched
a program, the TV set will stop
searching. If the program is not the
one you need, you can press the
button again, let the TV set continue
to search until it has searched the TV
signal you need.
Note:
Usually, five seconds after the channel has been changed, the channel
number will disappear automatically. If you want to know which channel
you are watching, just press the CALL/HELP button once.
1
B/G
144MHz
NORMAL

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Fine Tune
Fine Tune
Fine Tune 001
125.00MHz
TUNE
1
B/G
144MHz
NORMAL
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Sound
Tuning
Function
Picture
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Tuning (Continued)
If the pictureand/or sound are poor, tryusing the FINE
TUNE feature. Do not use this feature unless reception
is poor.
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number. ( For example, the
channel 1.)
2. Press the TUNE button, the tuning
menu will appear on the screen.
3. Press the CH+/- buttons to
move the indicator to " Fine Tune ".
4. Press the VOL+ button to enter
the Fine Tune Menu, and then
until it has searched the
TV signal you need.
the
VOL- button to search downwards
or the VOL+ button to search
upwards

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Skip unnecessary channel
TUNE
1
B/G
144MHz
NORMAL
Sound
Tuning
Function
Picture
Prog NO. 001
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Sound
Tuning
Function
Picture
Prog NO. 001
Skip ON
Sound Sys. B/G
Fine Tune
Search
Auto Search
Tuning (Continued)
Skip unnecessary channel
The Program skip feature enables you to skip/hide
programs that you do notwish to be displayed when
using the CH+/- buttons. These channels will still be
displayed by directly using the channel number
buttons on the remote control.
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number. ( For example, the
channel 1.)
2. Press the TUNE button, the tuning
menu will appear on the screen.
. Press the CH+/- buttons to
move the indicator to "Skip OFF ".
. Press the VOL-/+ buttons to
turn the Skip function to "ON ".
. Press the TUNE button to exit
the menu.
If you want to recover the skipped channel
1. Use the Channel Selection buttons to select the number of the
channel to be recovered.
2. Repeat those steps just now.
3. Press the VOL+/- buttons to turn the SKIP function OFF.

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Exchange Programs
Prog NO.1 001
Prog NO.2 002
Exchange
Sound
Tuning
Function
Picture
Prog NO.1 006
Prog NO.2 009
Exchange
Sound
Tuning
Function
Picture
Prog NO.1 006
Prog NO.2 009
Exchange
Sound
Tuning
Function
Picture
This feature enables TV programmes that may be on a wrong program
number to be moved to another number.
This feature is very useful when Automatic Search Tuning has been used
because programmes are stored in the order they are found, which is usually
not the desired order.
When organising, it is best to start from the lowest programme number first.
Exchange Programs
1. Press the TUNE button, the tuning
menu will appear on the screen, then
press the CH- button continuously to
turn the next page menu.
2. Press the VOL-/+ buttons to set
the Prog NO.1 to 6, then the TV set
will turn to the channel 6.
. Press the CH+/- buttons to
move the indicator to " Prog NO.2 ".
4. Press the VOL-/+ buttons to set
the Prog NO.2 to 9.
. Press the CH+/- buttons to
move the indicator to " Exchange ".
6. Press the VOL-/+ buttons to confirm.
Tuning (Continued)
TUNE

CH+
CH-
VOL- VOL+
MENU
NORMAL
SOFT
Brightness
Contrast
Color
Sharpness
Color Temp.
NORMAL
SOFT
PERSONAL
PIC MUTE
BRIGHT
P.STD
PICTURE
PERSONAL
PIC MUTE
BRIGHT
Sound
Tuning
Function
Brightness
Contrast
Color
Sharpness
Hue
Color Temp.
Picture
Convenient Picture and Sound Controls
Select the picture modes and set the picture quality
How to select the picture modes
You can quickly select the desired picture
mode from four preset modes and one
customized mode.
Press the P.STD button to select the desired
picture quality. Five kinds of picture modes
(i.e., ",
"PERSONAL","BRIGHT", ) can be selected
in turn.
" NORMAL","SOFT" ,"PIC MUTE
MODE PICTURE QUALITY
Medium color and brightness
Low color and brightness
Set by yourself
No pictures)
Bright color
(
Set the picture quality
1. Press the PICTURE button, the
Picture menu will appear on the
screen.
. Press the CH+/- buttons to
move the indicator to the desired
option (For example, Contrast), then
press VOL-/+ buttons to set the
desired quality. Press the PICTURE
button to exit the Picture menu.
Press VOL- button
Option Press VOL+ button
Dark
Weak
Light
Soft
Warm
Bright
Strong
Thick
Sharp
Cold
Tip: HUE option is available only in N color system.

CH+
CH-
VOL- VOL+
MENU
THEATER
PERSONAL
MUSIC
NORMAL
SPEECH
Treble
Balance
Bass
S.STD
SOUND
THEATER
MUSIC
NORMAL
SPEECH
PERSONAL
Sound
Tuning
Function
Picture
Treble
Bass
Balance
Sound Effect
Surround ON
Convenient Picture and Sound Controls (Continued)
Select the sound modes and set the sound quality
How to select the sound modes
You can quickly select the desired sound
mode from four preset modes and one
customized mode.
Press the S.STD button to select the desired
picture quality. Five kinds of sound modes
(i.e.,
", ) can be selected
in turn.
"THEATER" ,"PERSONAL","MUSIC",
" NORMAL"," SPEECH
Mode
Sound quality
Suitable for rich and full music
You can set it by yourself
Musical
Standard
Speech
Set the sound quality
1. Press the SOUND button, the
Sound menu will appear on the
screen.
. Press the CH+/- buttons to
move the indicator to the desired
option (For example, Bass), then
press VOL-/+ buttons to set the
desired quality. Press the SOUND
button to exit the Sound menu.
Option Press VOL- button Press VOL+ button
Weak
R track down
Weak
Strong
R track down
Strong

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Sound Effect, Surround and Mute functions
Sound Effect function
Surround Function
SOUND
SOUND
MUTE
Sound
Tuning
Function
Picture
Treble
Bass
Balance
Sound Effect
Surround ON
Stereo
V.SRS
MONO
Sound
Tuning
Function
Picture
Treble
Bass
Balance
Sound Effect
Surround ON
Convenient Picture and Sound Controls (Continued)
Surround effect chip has beenemployed to forma vivid and real space surround sound
effect.
There are Stereo, V.SRS and MONO sound effect for the
TV set. You may select the desired option.
1. Press the SOUND button, the
Sound menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to "Sound Effect".
. Press the VOL+ button to
sub-menu.
. Press the CH+/- buttons to select
the desired option, then the sound effect of the TV set turn to the
sound effect selected. Press MENU button to exit the sub-menu.
1. Press the SOUND button, the
Sound menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to " Surround ".
. Press the VOL-/+ buttons to turn
the " Surround " function ON.
How to use the Mute function
1. Press the MUTE button once, a
sign of mute will appear on the
screen, and then the sound will be
eliminated to half; press the MUTE
button again the sound will be
eliminated completely .
When you want to listen to the sound nearby, or when you are
answering the telephone, or talking with your friends, you may use
the mute function.
2. Press thevolume button or
press the MUTEbutton again,
and the soundwill be recovered.

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Set clock
TIME
TIME
TIME
Clock 18:18
On Time --:--
On Prog. ---
Off Time --:--
Sleep 0
Remind Time --:--
Remind Prog. ---
TIME
Clock 18:18
On Time 18:00
On Prog. ---
Off Time --:--
Sleep 0
Remind Time --:--
Remind Prog. ---
TIME
Clock 18:18
On Time 18:00
On Prog. 008
Off Time --:--
Sleep 0
Remind Time --:--
Remind Prog. ---
Time Set Up Function
This model hastime set functionsuch as On/Off Time,Sleep and RemindTime, etc.
When the ChildLock is working,On Timeand Remind Time function cannot be used.
Clock and On/Off Time functions
When this function is used, please first check whetherthe
clock is in accordance with your local time; if not, you can
follow the instructions to adjust it.
1. Press the TIME button, the Time
menu will appear on the screen.
. Press the CH+/- buttons to move
the indicator to " Clock ", then press
the VOL-/+ buttons to adjust.
If the VOL+/-buttons is not
released, the timewill change
in ten minutes.
If the VOL+/-buttons is pressedand released, thetime will
change in oneminute.
Tips:
On/Off Time function
The TV set can be powered on/off at a preset time and it can
start with aprogram you havepreset.
Here take OnTime functionfor example. The Off Time function
is same withit.
1. Press the TIME button, the Time
menu will appear on the screen.
. Press the CH+/- buttons to move
the indicator to " Clock ", then press
the VOL-/+ buttons to adjust (For
example, 18:00).
. Press the CH+/- buttons to move
the indicator to " On Prog. ", then
press the VOL-/+ buttons to adjust
(For example, 8).
4. Repeat step 1-2 to turn OFF
TIME.(take 23:00 as an example)
Note:
This function willonly be
available when theTV set
is in themode of standby.

CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Sleep and Remind Prog. Functions
Sleep function
Remind Prog. Function
TIME
TIME
TIME
Clock 18:18
On Time 18:00
On Prog. 008
Off Time --:--
Sleep 120
Remind Time --:--
Remind Prog. 001
TIME
Clock 18:18
On Time 18:00
On Prog. 008
Off Time --:--
Sleep 120
Remind Time 19:00
Remind Prog. 001
TIME
Clock 18:18
On Time 18:00
On Prog. 008
Off Time --:--
Sleep 120
Remind Time 19:00
Remind Prog. 018
Time Set Up Function(continued)
The TV set have 18 sections option
(each section has a time interval of 10 minutes).
for sleep timer function
1. Press the TIME button, the
Time menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to " Sleep ", then press
the VOL-/+ buttons to adjust.
. Press the VOL-/+ buttons to adjust.
With Remind Prog. function, the TV set can automatically
change a preset program in a preset time .
1. Press the TIME button, the
Time menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to " Remind Time ",
then press the VOL-/+ buttons to
adjust (For example, 19:00).
. Press the CH+/- buttons to move
the indicator to " Remind Prog. ",
then press the VOL-/+ buttons to
adjust (For example, 18).