HairMax LaserBand 82 User manual

HairMax LaserBand 82
Quick guide
The HairMax LaserBand 82 is a very effective device when used correctly. It is manufactured using
precision components and should last 0- 5 years under normal usage. Please take time to read the
entire User Manual before operating the LaserBand.
Use the LaserBand 82 for less than 90 seconds, 3 times a week, ideally every other day (for
example Monday, Wednesday, Friday).
FOR MAXIMUM BENEFIT:
scalp should be freshly washed (hair can be wet, dry or damp)
 use the LaserBand prior to applying styling products (these can build up and impede the
laser light)
regularly clean the laser window with a damp cloth. Do not use harsh detergents or cleaning
products on any part of the LaserBand.
harge your LaserBand for 4-5 hours before initial use. Charge the LaserBand by plugging the
power cord directly into the charging socket on the bottom right side of the LaserBand (Figure A).
Plug the other end into an electrical socket. The indicator light on the power button will flash blue
during the charging process. A steady blue light indicates your LaserBand is fully charged (Figure
B).
NOTE - POSITION THE LASERBAND WITH THE POWER BUTTON ON THE RIGHT SIDE
OF YOUR HEAD
Before beginning treatment, be sure to test the LaserBand for sensitivity (see page 5 of your User
Manual). Next, press the power button once to activate the 30-second treatment method or twice for
the 4-second treatment method (Figure C). See Page of the User Manual fora more in-depth
explanation of the two treatment methods. Choose either the 30-second or the 4-second treatment
method. (Do not treat your hair with both methods).
30-second treatment method
Press the power button to select the 30-second treatment method. Place the LaserBand at your
hairline and leave it in place until it vibrates (Figure D). Next, slide the LaserBand to the middle
portion of your scalp using light pressure so the teeth can separate your hair (Figure E). When your
LaserBand vibrates again, slide it to the last spot on your scalp (Figure F). You have completed
today’s treatment
4-second treatment method
Press the power button twice to select the 4-second treatment method. Place the LaserBand at your
hairline and leave it in place until it vibrates (Figure D). Next, slide the LaserBand to the middle
portion of your scalp using light pressure so the teeth can separate your hair (Figure E). When your

LaserBand vibrates again, slide it to the last spot on your scalp (Figure F). This completes the first
pass of your treatment. Repeat this process 6 times to complete today’s treatment.
After treatment, turn off the LaserBand by pressing and holding the power button until the
indicator light turns off (Figure G). Remove the LaserBand from your head and plug it into the
charger for future use.
HairMax offers alternate teeth sizes (shorter or longer) to maximize the fit and comfort of your
device. See the User Manual for more information.
Laser Light - Avoid direct eye exposure.
Please note:
The time required for treatment with the HairMax LaserBand 82 is as little as 90 seconds.
Your HairMax turns off automatically after 0 minutes.
Although there are no negative effects of abuse, it is recommended to use the LaserComb
according to the instructions.
LaserComb has advanced electronic circuits to ensure that the device works properly. If for
any reason you have problems with the device, before sending it to us for repair, please
contact us by phone or email.
The HairMax LaserBand 82 is indicated to treat Androgenetic Alopecia, and promote hair growth in
males who have Norwood Hamilton Classifications of IIa to V and in females who have Ludwig
(Savin) I-4, II- , II-2,or frontal patterns of hair loss and who both have Fitzpatrick Skin Types I to
IV.