HairMax LaserBand 82 User manual

HairMax®
LaserBand 82
QUICK START GUIDE

Char e your HairMax for 4-5 hours before
initial use. Charge your HairMax by plugging
the power cord directly into the charging socket
on the bottom right side of your HairMax
(Figure A). Plug the other end into an electrical
socket. See page 10 of the User Manual for the
correct orientation of the power cord.
The indicator light on the power button will
flash during the charging process. A steady
light indicates your HairMax is fully charged
(Figure B).
Before be innin treatment, test your HairMax
for sensitivity (see page 5 of the User
Manual). Next, press the power button once to
activate the 30-second treatment method O
twice for the 4-second treatment method
(Figure C). See page 11 of the User Manual for
a more in-depth explanation of the two
treatment methods.
Your HairMax® is a highly effective device when used correctly. It is
manufactured using precision components and should last 10-15
years with normal use. Please take time to read the User Manual
before operating your HairMax.
90
seconds
as little as
Use the LaserBand 82 for as little as
90 seconds, 3 times a week, ideally
every other day (for example Monday,
Wednesday, Friday).
For maximum benefit:
• Scalp should be clean, free of any styling products (hair can be dry,
towel dry or damp)
• Use your HairMax prior to applying styling products (these can
build up and impede the laser light)
• egularly clean the laser window with a damp cloth. Do not use
harsh detergents or cleaning products on any part of your HairMax
A
B
C
NOTE - POSITION THE LASERBAND WITH THE POWER
BUTTON ON THE RIGHT SIDE OF YOUR HEAD.
LaserBand 82 Model

Laser Light - Avoid Direct Eye Exposure
F
G
D
E
Choose either the 30-second OR the 4-second treatment method.
(Do not treat your hair with both methods.)
30-Second Treatment Method
Press the power button once to select the
30-second treatment method. Place your
HairMax at your hairline and leave it in place
until it vibrates (Figure D). Next, slide your
HairMax to the middle portion of your scalp
using light pressure so the teeth can separate
your hair (Figure E). When your HairMax
vibrates again, slide it to the last spot on your
scalp (Figure F). You have completed today’s
treatment.
4-Second Treatment Method
Press the power button twice to select the
4-second treatment method. Place your
HairMax at your hairline and leave it in place
until it vibrates (Figure D). Next, slide your
HairMax to the middle portion of your scalp
using light pressure so the teeth can separate
your hair (Figure E). When your HairMax
vibrates again, slide it to the last spot on your
scalp (Figure F). This completes the first pass
of your treatment. Repeat this process 6 times
to complete today’s treatment.
After treatment, turn off your HairMax by
pressing and holding the power button until
the indicator light turns off (Figure G). emove
your HairMax from your head and plug it into
the charger for future use.
HairMax®offers a ternate teeth sizes (shorter or
onger) to maximize the fit and comfort of your
device. See the User Manua for more information.

P ease Note:
The time required or treatment with the HairMax®LaserBand 82
is as little as 90 seconds.
Your HairMax will automatically turn o a ter 10 minutes.
While there are no negative e ects rom overuse, it is
recommended that you use your HairMax according to the
directions.
Your HairMax has advanced electronics to ensure the device
is working properly. I or some reason you are experiencing
di iculties with your device, be ore sending it back to us or
repair, re er to the troubleshooting section o your User
Manual on page 14.
For urther assistance call [phone].
LIT QSGLB82G 03 07/18
HairMax devices are indicated to treat Androgenetic Alopecia, and promote hair growth in males who
have Norwood Hamilton Classifications of IIa to V and in females who have Ludwig (Savin) I-4, II-1, II-2,
or frontal patterns of hair loss and who both have Fitzpatrick Skin Types I to IV.
Patent www.HairMax.com/patents
© Copyright 2018 Lexington Intl., LLC. All rights reserved.
HMLC00010000
Warning Label
Serial Number
(01)0 0856823 00615 2
(11)170314
(21)LB820001000
S/N: LB820001000
or
Corporate Office – Customer Service –
Warranty Repairs
Lexington Intl., LLC
1040 Holland Drive
Boca Raton, Florida 33487 USA
Direct ine [phone]
To Free 1-866-527-3726
Monday - Friday 9 AM - 5 PM EST
United States 1-866-527-3726
United Kingdom 0808-134-9868
Austra ia 1-800-937-358
Authorized Representative in Europe
(Regulatory A airs Only):
Emergo Europe, Molenstraat 15, 2513 BH The Hague, The Netherlands.
Tel: (31) (0) 70 345-8570 Fax: (31) (0) 70-345-7299
Australian Sponsor: Emergo Australia
Level 20, Tower II Darling Park, 201 Sussex Street
Sydney, NSW 2000 Australia
Register
To validate your warranty, register
online at www.hairmax.com/warranty