HairMax Ultima 9 Classic User manual

QUICK START GUIDE
HAIRMAX®Ultima 9 Classic
& Ultima 12 Classic
FOR MAXIMUM BENEFIT:
•Scalp should be freshly washed (hair can be wet, dry or damp)
•Use your HairMax prior to applying styling products (these can build up and
impede the laser light)
•Regularly clean the laser area with a damp cloth. Do not use harsh detergents
or cleaning products on any part of your HairMax
Use the LaserComb Ultima 9 Classic for
11 minutes and the Ultima 12 Classic for 8
minutes, 3 times a week, ideally every other
day (for example, Monday, Wednesday,
Friday).
11
minutes
Ultima 9
POWER BUTTON
LASER BUTTON
B
CHARGING OPTONS
Charge your HairMax for 2-3 hours before initial use.
OPTION 1 Charge your HairMax using the charging cradle
(stand) and power cord (Figure A). Prior to placing your
HairMax in the cradle, make sure your HairMax is turned off
and the teeth face away from you. Plug the power cord into
the cradle and the other end into an electrical wall outlet.
OPTION 2 Charging your HairMax by placing the power
cord directly into the HairMax (Figure B) and the other end
into an electrical wall outlet.
The indicator light on the power button will ash during the
charging process. Once charging is complete, the light will
stop ashing and remain on.
Do not use your HairMax while it is plugged into the
power cord.
Prior to treatment, test your HairMax for sensitivity. For more
information, see the the user manual.
Turn on the LaserComb by pressing the power button (lower
button) and hold until power button light turns on (Figure
C). Next, press the laser button (upper button) until it lights
up. That means the LaserComb is ready for use.
3times per week
8
minutes
Ultima 12
POWER BUTTON
LASER BUTTON
A
POWER BUTTON
LASER BUTTON
C

Laser Light - Avoid Direct Eye Exposure
HairMax®laser devices are indicated to treat Androgenetic Alopecia, and promote hair growth in males who have Norwood-
Hamilton Classications of lla to V and in females who have Ludwig (Savin) I-4, II-1, II-2, or frontal patterns of hair loss and
who both have Fitzpatrick Skin Types I to IV.
LIT QSGULT912C 01 0619
TREATMENT METHOD
To start your treatment place the LaserComb at on your
scalp so that both rows of teeth are touching the scalp
(Figure D).
Start at your hairline. Move the LaserComb from front to
back of scalp in a slow combing motion, stopping every ½
inch (1cm) and pausing for 4 seconds (Figure E). Do not lift
the LaserComb off your scalp while combing from front to
back.
Now, lift the LaserComb off your scalp and start at a new
position at the hair line. Continue in this manner from front
to back and then side to side (Figure F) until you cover your
entire scalp with multiple passes. When the LaserComb is on
it will beep and vibrate every four (4) seconds. This means
that it is time to move the LaserComb to the next area of the
scalp. Repeat these passes for the total treatment of 8 min
for Ultima 12 Classic and 11 min for Ultima Classic 9 models.
If you have long hair, use your ngers to lift your hair out of
the way while using the LaserComb to be sure that the laser
energy reaches your scalp (Figure G).
After treatment, turn off the LaserComb by pressing and
holding the power button (lower button) until the indicator
light turns off. Store the device in the charging cradle for
future use. You may leave the power cord plugged into the
charging cradle at all times.
NOTE: The Ultima 9 Classic and Ultima 12 Classic turn off
automatically after 12 minutes.
The HairMax® Ultima9 Classic and Ultima 12 Classic are highly effective devices
when used correctly. It is manufactured using precision components and should
last many years of normal use. If you experience difculties with your device,
please refer to the troubleshooting section of your user manual.
For detailed information about proper use, warnings and cautions, please
take time to read the entire user manual before operating your HairMax.
POWER BUTTON
LASER BUTTON
D
POWER BUTTON
LASER BUTTON
E
POWER BUTTON
LASER BUTTON
F
POWER BUTTON
LASER BUTTON
G