HairMax LaserBand 82 User manual

QUICK START GUIDE
HAIRMAX®LaserBand 82
FOR MAXIMUM BENEFIT:
•Scalp should be freshly washed (hair can be wet, dry or damp)
•Use your HairMax prior to applying styling products (these can build up and
impede the laser light)
•Regularly clean the laser area with a damp cloth. Do not use harsh detergents
or cleaning products on any part of your HairMax
3times
per week
Use your HairMax for as little as 90 seconds,
3 times a week, ideally every other day
(for example, Monday, Wednesday, Friday).
90
seconds
as little as
POWER BUTTON
LASER BUTTON
lift - and -place
glide
Please continue to treat your hair with a gliding motion: wait for the beep and then glide
your LaserBand to the next spot (Fig. A). Do not lift your LaserBand off your scalp. (Fig. B)
lift - and -place
glide
A
POWER BUTTON
LASER BUTTON
lift - and -place
glide
Please continue to treat your hair with a gliding motion: wait for the beep and then glide
your LaserBand to the next spot (Fig. A). Do not lift your LaserBand off your scalp. (Fig. B)
lift - and -place
glide
B
POWER BUTTON
LASER BUTTON
lift - and -place
glide
Please continue to treat your hair with a gliding motion: wait for the beep and then glide
your LaserBand to the next spot (Fig. A). Do not lift your LaserBand off your scalp. (Fig. B)
lift - and -place
glide
C
CHARGING
Charge your HairMax for 4-5 hours before initial use.
Prior to charging your HairMax, make sure your HairMax is
turned off.
Charge your HairMax by plugging the power cord directly
into the charging socket on the bottom right side of your
HairMax. See the User Manual for the correct orientation
of the power cord (Figure A). Plug the other end into an
electrical socket.
The indicator light above the power button will flash during
the charging process. A steady light indicates your HairMax
is fully charged (Figure B).
Do not use your HairMax while it is plugged into the
power cord.
Prior to treatment, test your HairMax for sensitivity. For more
information, see the user manual.
Next, press the power button once to activate the
30-second treatment method (recommended) OR twice for
the 4-second treatment method (Figure C).
INCORRECT CORRECT

Laser Light - Avoid Direct Eye Exposure
HairMax®laser devices are indicated to treat Androgenetic Alopecia, and promote hair growth in males who have Norwood-
Hamilton Classications of lla to V and in females who have Ludwig (Savin) I-4, II-1, II-2, or frontal patterns of hair loss and
who both have Fitzpatrick Skin Types I to IV.
LIT QSGLB82G 05 0319
After treatment, turn off your HairMax by pressing and
holding the power button until the indicator light turns off
(Figure G). Remove your HairMax from your head and plug it
into the charger for future use.
NOTE: The LaserBand 82 turns off automatically after 10
minutes.
TREATMENT METHOD
30-Second Treatment Method (Recommended)
Press the power button once to select the 30-second
treatment method. Your HairMax will vibrate every 30
seconds. Place your HairMax at your hairline and leave it in
place until it vibrates (Figure D). Next, slide your HairMax to
the middle portion of your scalp using light pressure so the
teeth can separate your hair (Figure E). When your HairMax
vibrates again, slide it to the last spot on your scalp (Figure
F). You have completed today’s treatment.
4-Second Treatment Method
Press the power button twice to select the 4-second
treatment method. Your HairMax will vibrate every 4
seconds. Place your HairMax at your hairline and leave it in
place until it vibrates (Figure D). Next, slide your HairMax to
the middle portion of your scalp using light pressure so the
teeth can separate your hair (Figure E). When your HairMax
vibrates again, slide it to the last spot on your scalp (Figure
F). This completes the rst pass of your treatment. Repeat
this process 6 times to complete today’s treatment.
The HairMax® LaserBand is a highly effective device when used correctly. It
is manufactured using precision components and should last many years of
normal use. If you experience difculties with your device, please refer to the
troubleshooting section of your user manual.
For detailed information about proper use, warnings and cautions, please
take time to read the entire user manual before operating your HairMax.
HairMax® offers alternate teeth sizes (shorter or longer) to maximize the t
and comfort of your device. See the User Manual for more information.
POWER BUTTON
LASER BUTTON
lift - and -place
glide
Please continue to treat your hair with a gliding motion: wait for the beep and then glide
your LaserBand to the next spot (Fig. A). Do not lift your LaserBand off your scalp. (Fig. B)
lift - and -place
glide
D
POWER BUTTON
LASER BUTTON
lift - and -place
glide
Please continue to treat your hair with a gliding motion: wait for the beep and then glide
your LaserBand to the next spot (Fig. A). Do not lift your LaserBand off your scalp. (Fig. B)
lift - and -place
glide
E
POWER BUTTON
LASER BUTTON
lift - and -place
glide
Please continue to treat your hair with a gliding motion: wait for the beep and then glide
your LaserBand to the next spot (Fig. A). Do not lift your LaserBand off your scalp. (Fig. B)
lift - and -place
glide
F
POWER BUTTON
LASER BUTTON
lift - and -place
glide
Please continue to treat your hair with a gliding motion: wait for the beep and then glide
your LaserBand to the next spot (Fig. A). Do not lift your LaserBand off your scalp. (Fig. B)
lift - and -place
glide
G