Haltian thingsee AIR Manual

User and Installation Guide
ENVIRONMENT
v.21.03

Welcome to use Thingsee
Congratulations on choosing Haltian Thingsee as your IoT solution. We
at Haltian want to make IoT easy and accessible for everyone, so we
have created a solution platform that is easy to use, scalable and
secure. I hope our solution will help you achieve your business
goals!
Pasi Leipälä
CEO, Haltian Oy
Thingsee ENVIRONMENT
Thingsee ENVIRONMENT is a multipurpose wireless IoT sensor for
environment monitoring. It is a perfect match for building new IoT
solutions for a variety of business verticals. It can be used to measure
several environmental variables or monitor machine usage rates.
Thingsee ENVIRONMENT is part of Haltian Thingsee IoT solution and
product family.

Using Thingsee ENVIRONMENT sensor
Sales package content
Indoor environment monitoring can make any building or space smart.
Real-time information over temperature and humidity can be used
to create better end-user experiences, eicient energy consumption
and better facility management planning with factual data over the
environmental factors.
Thingsee ENVIRONMENT sensor measures temperature, humidity,
barometric pressure, and ambient light. In addition, it has an
accelerometer and a magnetic switch.
Thingsee ENVIRONMENT’s magnetic switch recognition can be used
to monitor the open/closed position of doors and windows, and the
ambient light sensor can recognize if the lights are on or o.
The accelerometer can identify the sensor’s position, but also recognise
even the smallest G-forces, which can be used to measure machine
usage rates. This is very handy when tracking the usage for various
machines and predicting their maintenance needs.
The sensor is for indoor use only.
The environment humidity can be measured between 0 - 100 % RH at
all time.
The usage temperature range is -40 ºC to +85 ºC, non-condensing
environments only.
• Thingsee ENVIRONMENT sensors
• 1 x Opening Key

Note before installation
Please make sure the Thingsee gateway device is installed before you
install the sensor.
To ensure strong enough signal strength for data delivery, keep the
maximum distance between installed sensors under 20 m.
If the distance between a measuring sensor and the gateway is > 20 m
or if the sensors are separated by a fire door or other thick building
materials, use extra sensors as routers to ensure adequate signal
strength.
Things to avoid in installation
Avoid installing the Thingsee products near the following:
Thick concrete structures or thick fire doors
Electrical transformers or thick electrical wires
< 20 m

Direct sun light
Nearby heating or cooling devices and/or vents
Escalators
Nearby halogen lamps, fluorescent lamps or
similar lamps with hot surface
Nearby radio equipment like WiFi routers or any
other similar high power RF transmitters
Inside metal box or covered with a metal plate
Inside or underneath a metal cabinet or box
Near elevator motors or similar targets causing a
strong magnetic field
Avoid installing the sensor in close proximity to a
spot where there’s people presence constantly,
such as right next to workstations