General installation instructions
Sensor is for indoor use only.
The sensor is more sensitive to movement
across the sensor detecting area than
towards the sensor.
The sensor can only measure movement
inside the detecting area.
It is not a volumetric sensor.
When attaching to a wall, place the sensor
around 2/3rds of the wall height to avoid
unnecessary detection of pets or other
domestic animals. Sensor sensitivity can be
also reduced in such cases.
Thingsee PRESENCE can be installed under a table to detect the usage
of a working space. Sensor sensitivity should be decreased to avoid
unwanted detections outside the working space. This is possible with
Thingsee Occupancy Dome.
Using Thingsee PRESENCE sensor
Sensor detects the movement based on body heat detection.
Using sensor for visitor counting
Using workspace occupancy detection
Sensor can be used for visitor counting in places like door ways and
corridors. Thingsee Visitor Counter Dome is available for this
purpose.
