Hamilton Beach MultiBlend B66 User manual

GB MultiBlend™ Blender
Operation Manual – Original Instructions (2)
AR
(16)
ZH MultiBlend™攪拌機
操作手册 (30)
MS Pengisar MultiBlend™
Manual Pengendalian (44)
FR Mélangeur MultiBlend™
Mode d’utilisation (58)
Type: B66
Visit https://hamiltonbeach.global for
our complete line of products and Use and
Care Guides – as well as delicious recipes,
tips, and to register your product online!
請訪問 https://hamiltonbeach.global ，查
看我們的完整產品系列以及使用和保
養指南、美味食譜和小貼士，並在線
註冊購買的產品！
GB
ZH
MS
FR
Lawati https://hamiltonbeach.global untuk
barisan produk kami yang lengkap dan Panduan
Penggunaan dan Penjagaan – begitu juga dengan
resipi yang sedap, tip dan untuk daftar barang
anda secara dalam talian!
Rendez-vous sur https://hamiltonbeach.global
pour consulter tous nos produits, les Guides
d’utilisation et d’entretien, de délicieuses recettes,
des conseils ainsi que pour enregistrer votre
produit en ligne.
!
AR

2
IMPORTANT SAFEGUARDS
This product is intended for household use only. When using electrical appliances, basic safety
precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons,
including the following:
1. Read all instructions.
2. This appliance is not intended for use, cleaning,
or maintenance by persons with reduced
physical, sensory, or mental capabilities, or lack
of experience and knowledge, unless they are
closely supervised and instructed concerning
the use of the appliance by a person responsible
for their safety. Close supervision is necessary
when any appliance is used near children.
Children should be supervised to ensure they
do not play with the appliance.
3. This appliance shall not be used by children.
Keep the appliance and its cord out of reach of
children.
4. Cleaning and user maintenance shall not be
made by children without supervision.
5.
To protect against risk of electrical shock, do not put
cord, plug, base, or motor in water or other liquid.
6. Always disconnect the appliance from the
power supply if it is left unattended and before
assembling, disassembling, or cleaning.
7. Avoid contact with moving parts.
8. Do not operate any appliance with a damaged
supply cord or plug, or after the appliance
malfunctions or has been dropped or damaged
in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer,
its service agent, or similarly qualified persons
in order to avoid a hazard.
9. The use of attachments, including canning jars,
not recommended or sold by the appliance
GB

3
manufacturer may cause a risk of injury to persons.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or
counter or touch hot surfaces, including stove.
12. Keep hands and utensils out of blender jar
while blending to reduce the risk of severe
personal injury and/or damage to blender. A
rubber spatula may be used but must be used
only when blender is not running.
13. Blades are sharp; handle carefully—especially
when assembling, disassembling, or cleaning
inside blender jar.
14. Do not place appliance on or near a hot gas or
electric burner, or in a heated oven.
15. Do not place on or near a hot gas or electric
burner, or in a heated oven.
16. Do not use a broken, chipped, or cracked
blender jar.
17. Do not use broken, cracked, or loose cutting
blade assembly.
18. To reduce the risk of injury, never place cutting
blade assembly on base without blender jar
properly attached.
19. Always operate blender with lid in place.
20. Be careful if hot liquid is poured into the
blender as it can be ejected out of the appliance
due to sudden steaming.
21. When blending hot liquids, remove filler-cap of
two-piece lid and close the edge cover opening
intended for pouring. To prevent possible
burns: Do not exceed the 3-cup (710-ml) level.
Hot liquids may push off two-piece lid during
blending; therefore, with the protection of an
oven mitt or thick towel, place one hand on top
of the lid, keep exposed skin away from the lid,
and start blending at lowest speed.

4
22. Ensure collar on base of blender jar is tight
and secure. Injury can result if moving blades
accidentally become exposed.
23. If the jar should twist or rotate when the motor
is switched ON, switch OFF immediately and
tighten jar in collar or on blender base.
24. Do not leave blender unattended while it is
operating.
25. Before plugging cord into wall socket, turn the
control to OFF ( ). To disconnect cord, turn
the control to OFF ( ). Then remove plug from
wall socket.
26. Do not use appliance for other than intended
purpose.
27. Do not operate more then 2 minutes ON.
28.
T his appliance is not intended to be operated
by means of an external timer or separate
remote-control system.
29. Your plug is provided with a 13-amp fuse
approved by ASTA to B.S. 1362. If you
need a replacement fuse carrier, it must be
replaced with the same colour-coded carrier with
the same markings. Fuse covers and carriers
can be obtained from approved service agents.
30. CAUTION: In order to avoid a hazard
due to inadvertent resetting of the thermal cut-
out, this appliance must not be supplied through
an external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
SAVE THESE INSTRUCTIONS

5
Other Consumer Safety Information
If the cutting blade assembly locks and will not move, it will
damage the motor. Do not use. Call the toll-free customer service
number for information.
Do not place blender jar in the freezer filled with food or liquid.
This can result in damage to the cutting blade assembly, jar,
blender, and possibly result in personal injury.
BEFORE FIRST USE: After unpacking blender, wash everything
except blender base in hot, soapy water. Dry thoroughly. Wipe
blender base with a damp cloth or sponge. DO NOT IMMERSE
BASE IN WATER. Care should be taken when handling cutting
blade assembly as it is very sharp.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in
order to reduce any impact to the environment. The user is responsible for returning the product to
the appropriate collection facility, as specified by your local code. For additional information regarding
applicable local laws, please contact the municipal facility and/or local distributor.

6
Parts and Features
Mess-Free Spout
With Hinged Cap
Blender Jar
Base
Cutting Blade
Assembly
NOTE: Blender jar,
cutting blade assembly,
and collar are
permanently attached.
Collar
Lid
Filler-Cap
Stir Spoon
Strainer
Assembly
Model: 58151-SAU
Type: B66
Ratings:
220–240 V~ 50–60 Hz 350 W

7
Using Your Blender BEFORE FIRST USE: After unpacking the blender, follow the
instructions in “Cleaning Your Blender.”
IMPORTANT: Your blender jar and cutting blade assembly are subject to wear during normal use. Always inspect jar for nicks, chips, or
cracks. Always inspect cutting blade assembly for broken, cracked, or loose blades. If jar or cutting blade assembly is damaged, do not use.
Call our toll-free customer service number to obtain replacement parts.
2 41
6
3
Push the desired speed button.
When using the button,
the blender will only run when
the button is held down.
Burn Hazard:
When blending hot liquids,
remove filler-cap of two-piece
lid and close the edge cover
opening intended for pouring.
To prevent possible burns: Do
not exceed the 3-cup (710-ml)
level. Hot liquids may push off
two-piece lid during blending;
therefore, with the protection
of an oven mitt or thick towel,
place one hand on top of the lid,
keep exposed skin away from
the lid, and start blending at
lowest speed.
WARNING Speed Control Selections
– OFF
Mix/Milkshake/EasyClean – Low Speed
Puree/Smoothie/Icy Drink – High Speed
Dice/Chop/Salsa – Low Speed
Grind/Crush Ice/Grate – High Speed
5

8
Using Your Blender (cont.)
1097
Blender Tips
• To add foods when blender is operating, open hinged pouring cap
and add ingredients through the opening.
• For best performance, the minimum amount of liquid needed per
recipe is one cup (8 ounces/237 ml). Add more liquid if food is not
blending properly.
• If blending action stops during blending or ingredients stick to
sides of the jar, insert stir spoon to help move the mixture around
or add more liquid to the blender jar.
• Do not try to mash potatoes, mix stiff dough, whip egg whites,
grind raw meat, or extract juices from fruits and vegetables.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender when in operation or
at any time.
Remove filler-cap and insert stir spoon into hole in lid. Place one hand
on top of the lid and use the stir spoon to add ingredients or to move
thick mixtures around in blender jar. NOTE: Turn blender OFF ( )
before removing filler-cap and when adding the stir spoon.
8

9
Blending Drinks
TIPS FOR BEST RESULTS:
• Always place liquid in blender jar first, then remaining ingredients.
• If frozen fruit or ice are not blending, stop blender and a few times.
TYPE OF DRINK
Fruit Smoothie
Milkshake
Frozen Drink
INGREDIENTS
1 cup (237 ml) milk
1 1/2 cups (355 ml) yogurt
2 cups (473 ml) frozen berries
or other fruit
Sweetener to taste (optional)
1 1/2 cups (355 ml) milk
2 large scoops ice cream
2 to 3 tablespoons (15 to 44 ml)
flavored syrup
1 cup (237 ml) drink mix, such as
Piña Colada mix
10 ice cubes
NUMBER OF SERVINGS
3 to 4
(makes 4 cups [946 ml])
2 to 3
(makes 3 cups [710 ml])
2
(makes 2 cups [473 ml])
BLENDER SETTING/TIME
setting for 45 seconds or until blended.
setting for 5 to 10 seconds or until
blended.
setting for 45 seconds or 5 times and
blend on for 45 seconds or until blended.

10
FOOD
Parmesan Cheese
Baking Chocolate
Nuts
Chopped Vegetables
Cookie or Cracker Crumbs
QUANTITY
10 oz. (283 g)
2 oz. (57 g)
1 cup (237 ml)
2 cups (473 ml)
1 cup (237 ml)
PREPARATION
1/2-in. (1.3-cm) chunks
Coarsely chop squares
None
Cut into 1-in. (2.5-cm) pieces,
cover with water
Break cookies or crackers
into pieces
BLENDING TIME
15 seconds
15 seconds
5 seconds
10 seconds
5 seconds
Blending Food
TIPS FOR BEST RESULTS:
• Use buttons with guidelines outlined in chart.
• Remove jar from base and shake to redistribute pieces.
• Place jar on base and a few more times until desired consistency is reached.
• Parmesan cheese should remain refrigerated prior to blending.