HAMPTON BAY TY-50-L (HD) User manual

THANK YOU.
We appreciate your trust and confidence in Hampton Bay with your purchase of this ventilation fan. At Hampton Bay we make
quality products to help you improve your home and give you peace of mind about your choice. Don’t forget to visit our website for
other Hampton Bay products. We hope you en oy this new addition to your home and thanks again for choosing Hampton Bay.
Model # TY-50-L (HD)
USE AND CARE GUIDE
VENTILATION FAN
READ AND SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., ST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM

2
Table o Contents
Table o Contents ........................................................ 2
Sa ety In ormation....................................................... 2
Warranty ...................................................................... 3
Pre-Installation ............................................................ 4
Planning For Successful Installation ......................... 4
Installation Options ................................................... 4
15B Tools Required .................................................. 5
Materials Required ................................................... 5
Hardware Included ................................................... 5
Pac age Contents .................................................... 6
Installation ................................................................... 7
Troubleshooting ........................................................ 11
Care and Cleaning..................................................... 11
Speci ications ........................................................... 12
TY-50-L (HD) Ultra Silent Ventilation Fan ............... 12
Service Parts ............................................................. 13
TY-50-L (HD) Serviceable Parts ............................. 13
Sa ety In ormation
1. WARNING – TO REDUCE THE RISK OF FIRE
ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
a. Use this unit only in the manner intended by the
manufacturer. If you have questions, contact
the manufacturer.
b. Before servicing or cleaning unit, switch power
off at service panel and loc the service
disconnecting means to prevent power from
being switched on accidentally. When the
service disconnecting means cannot be loc ed,
securely fasten a prominent warning device,
such as a tag, to the service panel.
2. This ventilation fan is approved for use over a
bathtub or shower when installed in a GFCI
protected circuit. Do not use unapproved fans over
a bathtub or shower that is not approved for that
application.
3. Installation wor must be carried out by a qualified
person(s) in accordance with all local and safety
codes including the rules for fire-rated construction.
4. Always vent fans to the exterior and in compliance
with local codes.
5. Install ductwor in a straight line with minimal
bends.
6. Use 120 V, 60 Hz for the electrical supply and
properly ground the unit. Follow all local safety
and electrical codes.
7. Do not use this fan with any solid-state control
device; such as a dimmer switch. Solid-state
controls may cause harmonic distortion, which can
cause a motor humming noise.
8. To reduce the ris of fire or electric shoc , do not
bloc air entry grill.
9. Sufficient air is needed for proper combustion and
exhausting of gases through the flute (chimney) of
fuel burning equipment to prevent bac drafting.
Follow the heating equipment manufacturer’s guideline
and safety standards such as those published by the
National Fire Protection Association (NFPA), and the
American Society for Heating, Refrigeration and Air
conditioning Engineers (ASHRAE), and the local code
authorities.

www.hamptonbay.com
3 Please contact 1-877-527-0313 for further assistance.
Sa ety In ormation (continued)
WARNING: Not suitable for use as a range hood.
CAUTION:
For general ventilating use only. Do not
use to exhaust hazardous or explosive materials
and vapors.
CAUTION: Do not install in locations where the air
temperature will exceed 104°F (40°C).
IMPORTANT:
Exercise care to not damage
existing wiring when cutting or drilling into walls or
ceilings.
NOTE
: Ma e sure duct wor size is a minimum of
the discharge. Do not reduce. Reducing the duct
size can increase fan noise.
IMPORTANT:
You may want to consult with a
professional electrician regarding the wiring of your
ventilation fan.
WARNING:
To reduce the ris of electric shoc ,
please disconnect the electrical supply circuit to the
fan before installing light it.
CAUTION: This product must be properly
grounded.
Warranty
The manufacturer warrants the products to be free from defects in materials and wor manship for a period of three (3)
years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in
normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive
remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not
been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall
not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance
with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an
accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or
wor manship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear.
The manu acturer does not warrant and specially disclaims any warranty, whether express or implied, o
itness or a particular purpose, other than the warranty contained herein. The manu acturer speci ically
disclaims any liability and shall not be liable or any consequential or incidental loss or damage, including but
not limited to any labor/expense costs involved in the replacement or repair o said product.
Contact Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com.

4
Pre
-
Installati
on
PLANNING FOR SUCCESSFUL
INSTALLATION
When installing the ventilation fan in a new
construction site, install the main body of the fan and
duct wor during the rough ‑ in construction of the
building. The grill should be installed after the finished
ceiling is in place.
When installing in existing construction, use the
dimensions on page 12 to determine the required hole
size for the ceiling. Grill edges should overlap finished
ceiling.
Not for use in coo ing area - see installation
instructions.
45°
Cooking area
45°
Do not install above or
inside this area
Cooking
Equipment Floor
Do not install ventilation fan in areas where the duct
wor will require configuration as shown.
NOTE
: If installing in existing construction, you must
have access to space above and below the installation
location.
INSTALLATION OPTIONS
We recommend installing the ventilation fan by securing the main body of the fan against one ceiling joist and using the
header bars as necessary for support of the adjoining joist.
There are multiple installation configurations possible for this ventilation fan. Not all configurations are shown. If your
installation requires a variation other than those shown, consult with a licensed contractor to determine the best
installation for your project. If you are replacing an existing fan, ensure that the new grill will adequately cover the
existing opening.

www.hamptonbay.com
5 Please contact 1-877-527-0313 for further assistance.
Pre
-
Installation (continued)
15B TOOLS REQUIRED
Hammer
Safety
goggles
Phillips
screwdriver
Level
Electrical
tape
Drill
MATERIALS REQUIRED
Duct
vent
Duct
clamp
Duct
tape
Duct
piping
HARDWARE INCLUDED
NOTE: Hardware shown to actual size.
AA
CC
DD
P rt
Description
Qu ntity
AA
Short screw (M4x12)
2
BB
Long wood screw (ST4x30)
8
CC
Screw (M4x6)
2
DD
Quick connect
5

6
Pre
-
Installation (continued)
PACKAGE CONTENTS
P rt
Description
A
Fan body
B
Installation bracket IV
C
Installation bracket II
D
Install
ation bracket I
Installation bracket III
F
Light box
G
D
ua
l
-
g
rill

www.hamptonbay.com
7 Please contact 1-877-527-0313 for further assistance.
Installation
1
Determine joist width
□ Measure the distance from the center of the two
ceiling joists where you will be installing the
ventilation fan.
□ Use the table to determine the header bar
installation.
□ For configuration 1, proceed to step 2.
□ For configuration 2, proceed to step 3.
□ For configuration 3, proceed to step 4.
Use the following to determine the proper installation
configuration:
Width between the Joists
Br ckets U
sed
Configur tion
12 in.
I
1
16 in.
I, IV
2
19.2 in.
I, II
3
2
Configur tion 1, initi l inst ll
3
Configur tion 2, initi l inst ll
□ Use long wood screws (BB) to loosely attach the
main body of fan (A) to ceiling joist in the four
locations shown.
□ Fit brac et I (D) against the main body of fan,
ensuring the brac et is snug against the opposite
ceiling joist.
□ Use long wood screws to loosely attach brac et I to
the opposite ceiling joist as shown.
□ Proceed to step 6.
□ Use long wood screws (BB) to loosely attach the
main body of fan (A) to the ceiling joist in the four
locations shown.
□ Fit brac et IV (B) against the main body of fan,
ensuring brac et I is snug against the opposite
ceiling joist.
□ Fit brac et I (D) against main the body of fan,
ensuring brac et IV is snug against the opposite
ceiling joist.
□ Use long wood screws to loosely attach brac et I
to opposite ceiling joist as shown.
□ Proceed to step 6.

8
Installation (continued)
4
Configur tion 3, prep r tion
5
Configur tion 3, initi l inst ll
□ Connect brac et I (D) to brac et II (C) using two
M4x6 screws (CC).
□ Use long wood screws (BB) to loosely attach the
main body of fan (A) to the ceiling joist in the
four locations shown.
□ Fit connected brac ets (C, D) against the main
body of fan, ensuring they are snug against the
opposite ceiling joist.
□ Use long wood screws to loosely attach brac et I
and 2 (C, D) to the opposite ceiling joist as
shown.
□ Proceed to step 6.
6
Fin l inst ll tion
7
Connect duct
□ Ensure the main body (A) is level.
□ Ensure the flange on the main body is flush with
the ceiling joist.
□ Firmly secure all screws on the main body and any
installed brac ets.
□ Use long wood screws (BB) to secure the main
body flange to bottom of ceiling joist as shown.
□ Install a circular duct to outlet and secure it with
duct tape or clamps.
□ Install the duct (G) to the outlet with a gradient
1°~2° to the outside as shown.
G

www.hamptonbay.com
9 Please contact 1-877-527-0313 for further assistance.
Installation (continued)
8
Using quick connect
9
Connect wiring from house to
box
WARNING:
Wiring must comply
with all applicable electrical
codes. Turn OFF power before removing or installing
connectors.
WARNING: COPPER TO COPPER ONLY. Do not use on
Aluminum wire.
CAUTION: Accessory part DD (quic connect) should meet
installation instructions below.
NOTE: Connector is reusable on solid wires of the same wire
gage or smaller. Do not reuse connector on stranded wires.
□ Strip the wires so half of the bare wire is showing.
□ Grip the wire firmly and push the stripped end of
the wire into the open port of connector (DD). Use
only one stripped end of the wire per port.
□ Verify the stripped end of the wire is fully inserted
to the bac of the connector (DD).
To switch box
Product wires
DD
NOTE
: Important wire information. Maximum temperature
rating 105°C (221°F). 600 volts maximum for building wire
and 1000 volts maximum in signs and lighting fixtures.
Flammability rating of the wires must meet UL94-V2. The
acceptable wire range includes: Solid: 12-20 AWG,
Stranded: 12-16 AWG (≤19 STRAND); 18AWG (7 STRAND),
Tin bonded: 14-18 AWG (≤19 STRAND).
WARNING: Follow all local electrical and safety codes.
CAUTION: Never place a switch where it can be reached
from a tub or shower.
□ Connect house wires to ventilation fan wires.
□ Match colors as shown.
CAUTION:
If your house wires do not match these colors,
determine what each house wire represents before
connecting. You may need to consult a licensed
electrician to determine this safely.

10
Installation (continued)
10
Connect wiring from box to
switch
WARNING:
Follow all local electrical and safety codes.
□ Connect wires to switch using the quic connect
(DD) or wire nuts (not provided).
□ Match colors as shown.
TY-50-L (HD)
WARNING:
Failure to wire product correctly could result in
electrical shoc , fire hazards, or damage to the product.
Consult a licensed electrician if you are unsure of your
ability to correctly install wiring.
White Black
(N)
(L)
(L)
(N)
(L)
Black
4 W Lamp
13 W CFL
Green&yellow
Black
Light unit
Red
Wiring Diagram
THERMALLY PROTECTED
Fan unit
Capacitor
Black
White
Motor
Earth ground
Power Supply
AC12 V 6 Hz
Junction box
Black
White
( GRD)
WARNING:
Failure to wire product correctly could result in
electrical shoc , fire hazards, or damage to the product.
Consult a licensed electrician if you are unsure of your
ability to correctly install wiring.
11
Att ch grill
□ Insert the mounting springs into the slots in the grill
(G).
□ Squeeze springs together and insert into the main
body.
T
G

www.hamptonbay.com
11 Please contact 1-877-527-0313 for further assistance.
Troubleshooting
CAUTION: Do not install in locations where the air
temperature will exceed 104°F (40°C).
Problem
Possible C use
Corrective Action
Fan will not turn on
□
Power off
□
Make sure the power suppl
y is on
□
Faulty switch
□
Test or replace the switch
□
Faulty wire connection
□
Check wire in the switch box
Care and Cleaning
WARNING: Unplug or disconnect the appliance from the
power supply before servicing.
□ To reduce the ris of fire, electric shoc , or injury to persons before servicing or cleaning the unit, disconnect and
loc the power supply at the panel to prevent the power from being turned on.
□ Before servicing or cleaning the unit, disconnect and loc the power supply at the panel to prevent the power from
being turned on.
□ Remove the grill by squeezing the springs and pulling down.
□ Wash and clean the grill in a sin and dry with a cloth.
□ Remove dust and dirt from the fan housing with a vacuum cleaner.
□ Dampen cloth with dish detergent, wipe the fan housing and dry with a cloth.
□ Replace the grill.
REPLACEMENT OF LAMP
WARNING: Unplug or disconnect the appliance from the
power supply before wor ing on unit.
WARNING:
The lamp’s glass is fragile. Please handle with
care. Do not pull hard on the lamp or you may brea the
glass..
□ Remove the grill by squeezing the springs and pulling down.
□ Change the 13W fluoresent bulb or the 4W incandescent lamp.
□ Replace the grill.

12
Speci ications
TY-50-L (HD) ULTRA SILENT VENTILATION FAN
Model No.
TY
-
50
-
L
(HD)
Air direction
50 cfm
Volt ge
120 V
Hertz
60 HZ
Duct di meter
4 in. (10.16 cm)
Noise
0.5 Sone
Power consumption (
F n
)
20 W
Power consumption
(
Lights
)
13 + 4 W
Speed
900 rpm
Air deliver t 0.1" WG
50 cfm
Weight
11.6
lbs. (
5.25
kg)
DIMENSIONS
Ceiling opening
-
length
9.5 in. (24.13 cm)
Ceiling opening
-
width
9.5 in. (24.13 cm)
Ceiling opening
-
depth
8.26 in. ( 21 cm)
Housing dimension
-
length
9.13 in. (23 cm)
Housing dimension
-
width
9.13 in. (23 cm)
Housing dime
nsion
-
depth
7.75 in. (19.6 cm)

www.hamptonbay.com
13 Please contact 1-877-527-0313 for further assistance.
Service Parts
TY-50-L (HD) SERVICEABLE PARTS
P rt number
Description
Qu ntity
50-001
Quick connectors
4
80-001
Quick connectors
1
50-002
Long wood screws
8
50-003
Short screw (M4x12)
2
50-004
Short screw (
M4x6)
2
50-009
D
ua
l
-
g
rill
1
50-006
Complete assembled fan and housing
1
50-007
Complete suspension brackets
1
50-008
Light box
1
50-009
50-008

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., ST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.