HAMPTON BAY YG204-BN-D User manual

Item #752-762
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
HAWKINS 44 INCH CEILING FAN
Model #YG204-BN-D
THANK YOU
THANK YOU
Item# 161-646

2
Table of Contents ..........................................................
Safety Information .........................................................
Warranty .........................................................................
Pre-installation ..............................................................
Specifications ..........................................................................
Tools Required ..........................................................................
Hardware Included ..................................................................
Package Contents ....................................................................
Installation .....................................................................
Assembly ........................................................................
Hanging the Fan .......................................................................
Attaching the Fan Blades .......................................................
Installing the Light Kit ............................................................
2
3
4
4
4
4
5
6
7
8
8
11
12
Operation ......................................................................
Pull Chain Operating Instructions ..........................................
Reverse Switch Operating Instructions ..................................
Care and Cleaning .......................................................
Troubleshooting ..........................................................
Service Parts ...............................................................
14
14
15
15
16
17
Table of Contents

Safety Information
1. To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
2. All wiring must be in accordance with the National Electrical
Code “ANSI/NFPA 70-1999” and local electrical codes.
Electrical installation should be performed by a qualified
licensed electrician.
3. The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 35
lbs. Use only CUL Listed outlet boxes marked “FOR FAN
SUPPORT.”
4. The fan must be mounted with a minimum of 7 ft. clearance
from the trailing edge of the blades to the floor.
5. Avoid placing objects in the path of the blades.
6. To avoid personal injury or damage to the fan and other
items, be cautious when working around or cleaning the fan.
7. Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
8. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding conductor
on one side of the outlet box and ungrounded conductor on
the other side of the outlet box.
9. All setscrews must be checked and retightened where
necessary before installation.
WARNING: To reduce the risk of electrical shock or fire, do
not use this fan with any solid-state fan speed control device.
It will permanently damage the electronic circuitry.
WARNING: To reduce the risk of personal injury, do not
bend the blade arms (also referred to as flanges), when
installing the brackets, balancing the blades or cleaning the
fan. Do not insert foreign objects in-between rotating fan
blades.
WARNING: To reduce the risk of fire, electric shock or
personal injury, mount the fan to the outlet box marked
acceptable for fan support with the screws provided with the
outlet box.
NOTICE: Canada's office of energy efficiency requires this fan to be
equipped with a 190 watt limiting device. If lamping exceeds 190
watts, the ceiling fan's light kit will shut off automatically.
CAUTION: To reduce the risk of personal injury, use only
the screws provided with the outlet box.
3 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

Warranty
4
Pre-Installation
44 in.
Low
Medium
High
120
0.19
0.3
0.4
9.6
25.4
47.8
83
138
182
1585
2790
3773
Fan size
Fan size
Watts
Watts
RPM
RPM
CFM
CFM
Speed
Speed
Volts
Volts
Amps
Amps
7.4 kgs
(16.2 lbs.)
8.3 kgs
(18.3 lbs.) 1.70 cuft
N.W.
N.W.
G.W.
G.W.
C.F.
C.F.
SPECIFICATIONS
SPECIFICATIONS
NOTE: These are approximate measures. They do not
include amps and wattage used by the light kit.
TOOLS REQUIRED
TOOLS REQUIRED
Phillips
screwdriver
Electrical
Tape
Wire
stripper
Adjustable
wrench
Flat blade
screwdriver
Step
ladder
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period
of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the
date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or
superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installa-
tion or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover
any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give their longest useful
life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby disclaim
any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by
law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty.
Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall
not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as
may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above
exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty
must be paid by the customer.
Contact the Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com.

Pre-Installation (continued)
HARDWARE INCLUDED
HARDWARE INCLUDED
AA
BB
CC
DD
EE
FF
GG
HH
II
JJ
KK
LL
MM
Blade attachment hardware
Mounting hardware
Plastic wire nut
Balance kit (not to scale)
Nuts (preassembled to the mounting bracket)
Washers (preassembled to the mounting bracket)
Blade arm screws (preassembled)
Light kit mounting screws (preassembled)
Metal nut
Glass cap
Decorative nut
Pull chains and Fobs (not to scale)
Extra switch housing cover (not to scale)
Part
Part
Description
Description
16
2
3
1
4
4
11
3
1
1
1
2
1
Quantity
Quantity
NOTE: Hardware shown to actual size.
5 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
AA
DD
HH
LL
MM
KK
II
JJ
EE
FF
GG
BB
CC

PACKAGE CONTENTS
PACKAGE CONTENTS
Part
Part
E
F
G
Description
Description
Motor housing
Light kit
Glass shade
A
B
F
E
G
C
D
Pre-Installation (continued)
6
Part
Part
A
B
C
D
Quantity
Quantity
1
1
5
5
Quantity
Quantity
1
1
1
Description
Description
Mounting bracket
Fan motor assembly
Blades
Blade arms

To hang your fan where there is an existing fixture but no ceiling
joist, you may need an installation hanger bar (OO) (not included)
as shown above.
If your ceiling fan does not have an existing CUL-listed mounting
box, then install one using the following instructions:
□Disconnect the power by removing the fuses or turning off
the circuit breakers.
□Secure the outlet box (NN) (not included) directly to the
building structure. Use appropriate fasteners and materials
(not included). The outlet box and its bracing must be able
to fully support the weight of the moving fan (at least 35
lbs.). Do not use a plastic outlet box.
The illustrations below show two different ways to mount the
outlet box (NN) (not included).
WARNING: To reduce the risk of fire, electric shock, or
personal injury, mount the fan to an outlet box marked
acceptable for fan support using the screws provided with the
outlet box. An outlet box commonly used for the support of
lighting fixtures may not be acceptable for fan support and
may need to be replaced. If in doubt, consult a qualified
electrician.
NN
NN
OO
NN
Installation
MOUNTING OPTIONS
MOUNTING OPTIONS
7 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

Assembly — Hanging the Fan
1Installing the mounting bracket
to the electrical box
Hanging the fan to the
mounting bracket
□Attach the mounting bracket (A) to the outlet box (NN)
(not included) with two screws and washers provided
with the outlet box (NN). Ensure the mounting bracket
(A) is tight and secured.
WARNING: To reduce the risk of fire, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
□Lift the fan into position by hanging the fan motor
assembly (B) onto the hook from the ceiling mounting
bracket (A) allowing it to hang freely.
A
NN
A
B
PP
2
3Installing the safety cable
□Secure the safety cable (PP) to the building structure
using a wood screw (not included).
8

4Making the electrical
connections
WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts (except for the ground wire).
WARNING: Electrical diagrams are for reference only.
Optional use of any light kit shall be CUL listed and marked
suitable for use with this fan.
WARNING: To reduce the risk of fire or electric shock, do
not use this fan with any solid-state speed control device.
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
QQ SS
RR
Assembly — Hanging the Fan (continued)
CC
NN
If you feel you do not have enough electrical wiring
knowledge or experience, have your fan installed by a
licensed electrician.
Follow the steps below to connect the fan to your
household wiring. Use the plastic wire nuts (CC) with your
fan. Secure the wire nuts with electrical tape. Make sure
there are no loose strands or connections.
□Connect the ground conductor (SS) of the 120V
supply (this may be a bare wire or a wire with green
colored insulation) to the green ground lead(s) (VV) of
the fan.
□Connect the fan motor white wire (UU) to the supply
white (neutral) wire (RR) using a wire nut (CC).
□Connect the fan motor black wire (TT) and the blue
wire (WW) to the supply black (hot) wire (QQ) using a
wire nut (CC).
□Turn the wire nut connections upward, spreading
them apart so the green (ground) will be on one side
of the outlet box (NN) and the white (UU), black (TT)
and blue (WW) wires will be on the other side, and
push carefully up into the outlet box (NN).
WW
TT
VV
UU
9 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

Assembly — Hanging the Fan (continued)
B
A
5Finishing the fan
installation
□Move the fan motor assembly (B) into position over
the four mounting bracket (A) studs and secure with
the provided washers (FF) and nuts (EE).
6Attaching the motor housing
to the mounting bracket
□Raise the motor housing (E) up against the mounting
bracket (A). The four supports inside the motor
housing (E) should be placed against the four studs
on the mounting bracket (A). Twist the motor housing
(E) clockwise until snug.
A
B
E
FF
EE
10

Assembly — Attaching the Fan Blades
7Attaching the blades to the
blade arms 8Fastening the blade assemblies to the motor
□Attach blades (C) to the blade arms (D) using the
three screws with fiber washers provided with the
blade attachment hardware (AA). Start a screw with
fiber washer (AA) into the blade arm (D), do not
tighten. Repeat for the two remaining screws and
fiber washers (AA).
□Tighten each screw securely starting with the center
screw. Make sure the blade (C) is straight. Repeat
steps for the remaining blades.
WARNING: To reduce the risk of personal injury, do not
bend the blade arms (D) while installing, balancing the blades
(C), or cleaning the fan. Do no insert foreign objects between
rotating fan blades (C).
AA
E
C
□Fasten the blade assemblies to the fan motor
assembly (E) by lining up the slots of the blade arms
(XX) with the tabs on the motor (YY), then tighten the
two screws and lock washers (GG) already installed
in the blade arms (D).
□Repeat this procedure for the remaining blade arms
(D).
D
D
C
XX
GG
YY
11 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

Assembly — Installing the Light Kit
9Attaching the light kit to the
switch housing 10
F
JJ
II
KK
F
Installing the light bulbs
□While holding the light kit (F) under your fan motor
assembly (B), locate two single white and blue wires
in the switch housing labeled "FOR LIGHT". Make the
polarized plug connections:
- White to white
- Blue to black
□Carefully push all wires back into the switch housing.
Install the light kit assembly (F) onto the switch
housing with the three light kit mounting screws (HH)
provided. Be sure to tighten all screws.
HH
B
□Install three 40-watt candelabra bulbs (not included).
□Remove the metal nut (II), glass cap (JJ) and decora-
tive nut (KK) from the light kit (F).
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
12

11 Installing the glass shade
CAUTION: Before starting the installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Assembly — Installing the Light Kit (continued)
II
JJ
KK
LL
G
F
LL
□While holding the glass shade (G), slip the pull chain
(LL) from the switch housing into the outside hole in
the glass shade (G).
□Feed the pull chain (LL) from the light kit stem
through the eyelet in the glass shade (G).
□Place the glass shade (G) over the light kit stem.
Secure the glass shade (G) with the metal nut (II)
(rubber side on the top).
□Fit the glass cap (JJ) onto the light kit stem and then
slip the pull chain from the side hole in the glass
shade (G) through the hole on the side of the glass
cap (JJ).
□Feed the pull chain from the light kit stem through
the decorative nut (KK), and then thread the decora-
tive nut (KK) on securely. Do not overtighten.
13 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

Operation
PULL CHAIN OPERATING INSTRUCTIONS
PULL CHAIN OPERATING INSTRUCTIONS
Install two pull chains and fobs (LL) onto the pull chains located in the
switch housing and light kit (F). Turn on the power and check the
operation of the fan.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such as the
room size, ceiling height, number of fans, and so on.
To turn the light On or Off, pull the chain that is attached to the light
kit (F).
LL
Assembly — Installing the Light Kit (continued)
Assembly — Installing the Light Kit (continued)
12 Installing the fan without the
light kit (Optional)
□Your fan is designed with a light kit (F). If you intend
case you intend to install the fan without the light kit
(F), attach the switch housing cover (MM) to the
switch housing located at the bottom of the motor
assembly (B) with light kit mounting screws (HH)
provided.
HH
MM
14

Operation (continued)
Care and Cleaning
□Check the support connections, brackets, and blade
attachments twice a year. Make sure they are secure.
Because of the fan’s natural movement, some
connections may become loose over time. It is not
necessary to remove the fan from the ceiling.
□Clean your fan periodically. Use only a soft brush or
lint-free cloth to avoid scratching the finish. The plating is
sealed with a lacquer to minimize discoloration or
tarnishing.
□(Optional) Apply a light coat of furniture polish to the wood
blades.
□(Optional) Cover small scratches with a light application of
shoe polish.
Do
Do
□Do not use water when cleaning. Water could damage the
motor, or the wood, or possibly cause an electrical shock.
□Do not apply oil to your fan or motor. The motor has
permanently-lubricated sealed ball bearings.
Do not
Do not
NOTE: Wait for the fan to stop before reversing the direction
of the blade rotation.
REVERSE SWITCH OPERATING INSTRUCTIONS
REVERSE SWITCH OPERATING INSTRUCTIONS
The reverse switch is located on the surface of the switch housing.
This switch controls directions: forward (switch down) or reverse
(switch up).
Warm weather - (Counterclockwise Direction) A downward air flow
creates a cooling effect. This allows you to set your air conditioner
on a higher setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air flow moves
warm air off the ceiling. This allows you to set your heating unit on
a lower setting without affecting your comfort.
15 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

□This unit is equipped with a wattage limiting device. Lamping in excess of 190 watts will disable your
ceiling fan's light kit. To reset your light kit you must turn the power off and relamp, keeping the
wattage under 190 watts. Restore power to your ceiling fan and continue normal operation.
□Check that all blade and blade arm screws are secure.
□Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a
point on the ceiling above the tip of one of the blades. Measure from a point on the center of each blade
to the point on the ceiling. Measure this distance. Rotate the fan until the next blade is positioned for
measurement. Repeat for each blade. Measurements deviation should be within 1/8 in. Run the fan for
10 minutes.
□Use the enclosed blade balancing kit if the blade wobble is still noticeable.
The lights shut off and will
not come back on.
The fan wobbles.
Troubleshooting
Problem
Problem
Solution
Solution
□Check main and branch circuit fuses or breakers.
□Check line wire connections to the fan and switch wire connections in the switch housing.
□Make sure all motor housing screws are snug.
□Make sure the screws that attach the fan blade arm to the motor hub are tight.
□Make sure wire nut connections are not rattling against each other or the interior wall of the switch
housing.
□Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this
time.
□If using the ceiling light kit, make sure the screws securing the glassware are tight. Check that the light
bulb is also secure.
□Make sure there is a short distance from the ceiling to the canopy. It should not touch the ceiling.
□Make sure your ceiling box is secure and rubber isolator pads are used between the mounting bracket
and outlet box.
The fan will not start.
The fan sounds noisy.
WARNING: Make sure the power is off at the electrical
panel box before you attempt any repairs. Refer to the section
“Making the Electrical Connections” on page 9.
16

Service Parts
EAA GG
HH
II
JJ
KK
LL
MM
BB
CC
EE
FF
DD
F
G
A
B
C
D
Part
Part
A
B
C
D
E
F
G
AA
BB
CC
Description
Description
Mounting bracket
Fan motor assembly
5 blades
5 blade arms
Motor housing
Light kit
Glass shade
Blade attachment hardware
Mounting hardware
Plastic wire nut
Part
Part
DD
EE
FF
GG
HH
II
JJ
KK
LL
MM
Description
Description
Balance kit
Nuts (preassembled with the mounting bracket)
Washers (preassembled with the mounting bracket)
Blade arm screws (preassembled)
Light kit mounting screws (preassembled)
Metal nut
Glass cap
Decorative nut
Pull chains and Fobs
Switch housing cover
17 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.
YG204B000001-C
PTS-208138-081312
PTS-207273-072712
PTS-207168-071612

Article n°752-762
GUIDE D'UTILISATION ET D'ENTRETIEN
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appelez
le service à la clientèle Hampton Bay
entre 8 h et 18 h (HNE) du lundi au vendredi au
1-877-527-0313
HAMPTONBAY.COM
VENTILATEUR DE PLAFOND HAWKINS DE 112 CM (44 PO)
Modèle n°YG204-BN-D
MERCI
MERCI
Nous vous remercions d'avoir fait confiance a Hampton Bay en achetant ce ventilateur de plafond. Nous nous efforcons en permanence
de creer des produits de qualite concus pour perfectionner votre maison. Vous pouvez visiter notre site en ligne pour consulter notre
gamme complete de produits pour vos besoins de renovation residentielle.
Merci d'avoir choisi Hampton Bay!

Table des matières
Table des matières ........................................................
Consignes de sécurité...................................................
Garantie ..........................................................................
Pré-installation ..............................................................
Outils requis .............................................................................
Caractéristiques .......................................................................
Quincaillerie comprise .............................................................
Contenu de l’emballage ............................................................
Installation ......................................................................
Assemblage ...................................................................
Suspension du ventilateur .......................................................
Installation des pales du ventilateur .......................................
Installation du luminaire .........................................................
2
3
4
4
4
4
5
6
7
8
8
11
12
Utilisation ......................................................................
Consignes d'utilisation de la chaîne (tirette) ..........................
Consignes d'utilisation de l'interrupteur d'inversion ..............
Entretien et nettoyage .................................................
Dépannage ....................................................................
Pièces de rechange .....................................................
14
14
15
15
16
17
2