HAMPTON BAY BARNSLEY FSS61119RA-ST User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this seating set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank
you for choosing Hampton Bay!
Item #584-475
Model #FSS61119RA-ST
USE AND CARE GUIDE
BARNSLEY 4-PIECE SEATING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday

2
Table of Contents
Table of Contents..........................................................2
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2
Pre-Assembly ................................................................2
Planning Assembly...................................................................2
Hardware Included...................................................................2
Motion Chair Package Contents...............................................3
Loveseat Package Contents.....................................................4
Table Package Contents ..........................................................5
Motion Chair Assembly................................................ 6
Loveseat Assembly....................................................... 9
Table Assembly........................................................... 10
Care and Cleaning ...................................................... 10
Warranty
1 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise if the model in question is no longer in production.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
complete the assembly of this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
A
A
M8x37 Hex bolt 8
BB M8x28 Hex bolt 8
CC M6x18 Bolt 32
DD Metal sheet 4
EE M6 Washe
r
40
FF M8 Washer 24
Part Description Quantity
GG M8 Spring washer 24
8tuN8MHH
8tloB54x6MII
JJ Plastic spacer 16
KK M8 Plastic washer 8
2hcnerWLL
MM Hex wrench 1
AA BB CC DD EE FF GG HH II JJ KK LL MM

MOC.YABNOTPMAH3
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP
Pre-Assembly (continued)
MOTION CHAIR PACKAGE CONTENTS
Part Description Quantity
A 2mrathgiR
2mratfeLB
2kcabriahCC
2ebuttroppuSD
2rabkcaBE
2rotcennocgeLF
2Back cushionP
2Seat cushionQ
A
C
B
E
D
F
Q
P

4
Pre-Assembly (continued)
LOVESEAT PACKAGE CONTENTS
Part Description Quantity
1mrathgiRG
1mratfeLH
1taesriahCI
1kcabriahCJ
1rotcennocgeLK
2Back cushionP
2Seat cushionQ
K
I
J
G
H
Q
P

5 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Assembly (continued)
TABLE PACKAGE CONTENTS
Part Description Quantity
L Glass 1
M Table rim 1
N Table leg 4
O Leg connector 1
O
L
N
M

6
Motion Chair Assembly
1Connecting the chair back to the support tube
□Align two metal sheets (DD) of the support tube (D) over the four holes in the bottom of the chair back (C).
□Attach the bottom of chair back (C) to the support tube (D) by inserting M8X37 hex bolts (AA), M8 washers (FF), and M8 plastic washers
(KK) through the metal sheets (DD), chair back (C), and support tube (D).
□Secure by attaching M8 washers (FF), M8 spring washers (GG), and M8 nuts (HH) to the ends of the M8X37 hex bolts (AA).
NOTE: Loosely tighten all bolts using wrench (LL).
FF
AA
KK
FF
GG
HH
D
C
C
D
DD

MOC.YABNOTPMAH7
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP
Motion Chair Assembly (continued)
2Connecting the support tube and back bar to the right arm
□Place the right arm (A) on a soft surface.
□Attach one end of the support tube (D) to the right arm (A) with M8X28 hex bolts (BB), M8 spring washers (GG), and M8
washers (FF).
□Align the holes of the back bar (E) with the holes in the rear portion of the right arm (A).
□Secure the back bar (E) to the right arm (A) with M6X18 bolts (CC) and M6 washers (EE).
□Repeat step 2 for the left arm (B).
□Stand the assembly upright.
NOTE: Loosely tighten all bolts using wrench (LL) and hex wrench (MM).
CC
EE
BB
GG
GG
FF
E
A

8
Motion Chair Assembly (continued)
3Connecting the leg connector to the chair legs
□Align the holes of the leg connector (F) with the holes located on the inside-bottom of each chair leg.
□Attach the leg connector (F) to the chair legs using M6x18 bolts (CC) and M6 washers (EE).
EE
CC
F
F
B
B
A

9
4Tightening all bolts
□Tighten all of the bolts.
□Check and ensure the chairs are tightly assembled and stable.
□Place the chair back (P) and seat (Q) cushions on the chairs.
P
Q
Motion Chair Assembly (continued)

MOC.YABNOTPMAH10
.ecnatsissarehtrufrof3130-725-778-1tcatnocesaelP
Loveseat Assembly
1
Connecting the chair seat and
chair back to the chair arms 2Connecting the leg connector to the legs
□Place the right arm (G) on a flat surface and place plastic
spacers (JJ) over the holes on the right arm (G).
□Attach the right arm (G) to the chair seat (I) and chair back
(J) by using M6x45 bolts (II), M6 washers (EE) , and
M6 plastic spacers (JJ).
□Repeat step 1 for the left arm (H).
NOTE: Loosely tighten all bolts using hex wrench (MM).
□Attach the leg connector (K) to the chair legs using
M6x18 bolts (CC) and M6 washers (EE).
□Securely tighten all of the bolts on the loveseat using the
hex wrench (MM).
J
K
G
EE
CC
K
JJJJ
JJ JJ
EE
II
H
II
EE
3
Tightening all bolts
□Tighten all of the bolts.
□Ensure the chairs are tightly
assembled and stable before use.
□Place the chair back (P) and seat (Q) cushions on the chairs.
P
Q
J