HAMPTON BAY FARRINGTON L-GZ669PST-Z User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this
gazebo. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing Hampton Bay!
Item #1001 025 208
Model #L-GZ669PST-Z
USE AND CARE GUIDE
FARRINGTON HARDTOP GAZEBO 10 X 12
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
WWW.HOMEDEPOT.CA

2 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Table of Contents
Table of Contents....................................................... 2
Safety Information...................................................... 2
Warranty ..................................................................... 2
What is Covered ...................................................................... 2
What is Not Covered................................................................ 2
Pre-Assembly ............................................................. 3
Planning Assembly.................................................................. 3
Hardware Included .................................................................. 3
Package Contents.................................................................... 4
Assembly .................................................................... 7
Care and Cleaning.................................................... 12
1. More than six people are required for this assembly.
2. Some parts may contain sharp edges. Wear protective
gloves.
3. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Please read all
instructions before assembly and usage.
DANGER: This unit is heavy! Do not assemble this item
alone.
WARNING: While this gazebo is manufactured to withstand
winds through only the supplied ground stakes, in areas
subject to frequent severe weather, securing the gazebo to a
deck, concrete patio or footings should be considered.
Snow must be cleared off regularly during snowy days.
Remove the snow at the top when it is thicker than 4 inches.
In order to avoid damage, use a plastic snow rake to remove
excessive snow and ice buildup from roof and keep away
from falling debris.
2 YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the
item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or
workmanship for a period of 2 years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling
the product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit WWW.HOMEDEPOT.CA.
Production Number: 20191812
Safety Information
NOTICE: For outdoor use only.
WARNING: Keep all flame and heat sources away from
this gazebo fabric. This Gazebo is made with fabric that
meets CPAI-84 specifications for flame resistance. It is not
fire proof. The fabric will burn if left in continuous contact
with any flame source. The application of any foreign
substance to the gazebo fabric may render the
flame-resistant properties ineffective.
Warranty
CAUTION: Do not climb on top of the gazebo. Falling off
the gazebo can result in serious injury, possibly even death.

3 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD EE
GG
HH II
JJ KK LL WW
Part
Description
Quantity
Part
Description
Quantity
AA
M6
*
20
Bolt
68
II
M6
*
70
Bolt
2
BB
M6
Flat
was
her
294
JJ
M6
*
75
Bolt
16
CC
M6
*
15
Bolt
112
KK
M
6 * 40 Bolt
56
DD
M6
*
60
Bolt
1
2
LL
Spring
w
asher
72
EE
M6
N
ut
28
WW
Wrench
2
GG
Plastic ring
52
HH
Dia.
8 *
180 Stake
8
ADDITIONAL HARDWARE
Part
Description
Quantity
Part
Description
Quantity
AA
M6
*
20
Bolt
4
HH
Dia.
8
*
180 Stake
0
BB
M6
Flat
w
a
s
her
15
II
M6*
70
Bolt
1
CC
M6
*
15
Bolt
6
JJ
M6
*
75
Bolt
1
DD
M6*60
Bolt
1
KK
M
6 * 40 Bolt
3
EE
M6
N
ut
2
LL
Spring
w
asher
4
GG
Plastic ring
3

4 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
PACKAGE CONTENTS
out
out
out
out
out
A
1
C
D3
D4
E3
E4
F1
G1
G2
H1
B1
I
I2
J4
J6
K
L
M
N
P1
P2
J5

5 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
Q2
R1
R2
R3
R4
S
1
S
2
S
3
Q3
T
7
T
8
U
V
W1
W2
W3
W4
T5
Q1
T
6

6 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
Part
Description
Quantity
A1 Post 4
B1 Stake base 4
C Stake cover 4
D3 Long cross beam (Left) 2
D4 Long cross beam (Right) 2
E3 Short cross beam (Left) 2
E4 Short cross beam (Right) 2
F1 Slanting beam connector 4
G1 Middle beam connector 1 4
G2 Middle beam connector 2 4
H1 Slanting beam 4
I Middle beam 2
I2 Middle beam 2 2
J4 Big top long connector tube 2
J5 Big top short connector tube 2
J6 Big top connector 4
K Small roof support beam 4
L Small roof connector 1
M Small roof cover 1
N Hook 1
P1 Small roof long panel 2
P2 Small roof short panel 2
Q1 Big roof short side upper panel 2
Q2 Big roof short side bottom panel (Left) 2
Q3 Big roof short side bottom panel (Right) 2
R1 Big roof long side upper panel (Left) 2
R2 Big roof long side upper panel (Right) 2
R3 Big roof long side bottom panel (Left) 2
Part
Description
Quantity
R4 Big roof long side bottom panel (Right) 2
S1 Small roof support beam cover 4
S2 Slanting beam cover 4
S3 Middle beam cover 4
T5 Long pipe 1 2
T6 Long pipe 2 2
T7 Short pipe 1 2
T8 Short pipe 2 2
U Curve support 8
V Mosquito netting 1
W1 Big roof long side beam 4
W2 Big roof short side beam 4
W3 Big roof long side lower beam 4
W4 Big roof short side lower beam 4

7 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1
Attaching the Stake Bases 2 Attaching the Slanting Beam
Connectors
q
Slide
the
S
take
covers
(C)
over
the
P
osts (A
1
). Attach the
Stake bases (B1) to the Posts (A1) using Bolts (CC) and Flat
washers (BB).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach the
S
lanting beam connector
s
(F
1
) to the
t
op of the
P
osts
(A1) using Bolts (AA) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
3
Connecting the Cross Beams 4 Attaching the Cross Beams
q
Attach the
Middle beam connector
s
1
(G1&G2)
on the
Cross
beams (D3&D4, E3&E4) using Bolts (JJ), Flat washers (BB),
Spring washers (LL), and Nuts (EE). Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach the assembled
C
ross beams (D3&D4, E3&E4) to the Posts
(A1) using Bolts (AA), Flat washers (BB) and Spring washers (LL).
Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.

8 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
5
Attaching the Curve Supports
6
Connecting the Big Roof
q
Attach the Curve supports (U) to the Post
s
(
A1) an
d Cross
beams (D3&D4, E3&E4) using Bolts (KK), Flat washers (BB)
and Spring washers (LL). Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Assemble the
Big t
op connector
tube
s
(J
4
&J
5
) with the Big
top connectors (J6) using Bolts (CC) and Flat washers (BB).
Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
7 Attaching the Slanting Beams 8 Attaching the Middle Beams
q
C
onnect
the
top of
the
Slanting
b
eams
(H1) with the Big
top connectors (J6) using Bolts (AA) and Flat washers (BB).
qConnect the bottom of the Slanting beams (H1) with the
Slanting beam connectors (F1) using Bolts (AA) and Flat
washers (BB). Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Connect
the
top of
the
Middle beam 2
(I
2)
with the
Big
top long connector tubes (J4) using Bolts (AA) and Flat
washers (BB). Install the Middle beam (I) in the same
way.
qConnect the bottom of the Middle beam 2 (I2) with the
Middle beam connector 1 (G1) using Bolts (DD), Flat
washers (BB) and Nuts (EE). Install the Middle beam (I)
in the same way.
NOTE
:
To avoid destroying the finish, do not put the
parts on the ground directly.

9 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
9
Attaching the Hook
10
Attaching the Small Roof
Support Beams
q
Insert and screw the
H
ook (N) tightly into the corresponding
hole on the Small roof connector (L).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach
the
S
mall roof support beam
s
(K) to
the S
mall
roof connector (L) using Bolts (DD), Flat washers (BB)
and Nuts (EE).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
11
Attaching the Small Roof 12 Attaching the Big Roof Beams
q
Attach
the
S
mall roof support beam
s
(K) to
the
Big Top
Connector (J6) using Bolts (CC) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach the
Big roof short side beam
s
(W2
) to the
top of
the Middle beams (I) and Slanting beams (H1) using
Bolts (CC) and Flat washers (BB). Tighten the bolts.
qAttach the Big roof long side beams (W1) to the top of
Middle beams 2 (I2) and Slanting beams (H1) using
Bolts (CC) and Flat washers (BB). Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.

10 WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
13
Attaching the Big Roof Lower
Beams
14
Attaching the Pipes
q
Attach the
Big roof short side lower beam
s
(W4
) to the
bottom of the Middle beams (I) and Slanting beams (H1)
using Bolts (CC) and Flat washers (BB).
qAttach the Big roof short side lower beams (W4) to the
bottom of the Middle beams 2 (I2) and Slanting beams (H1)
using Bolts (CC) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach the
P
ipe
s
(T5&T6&T7&T8)
to the
Middle
beam
s
(I&I2) and Slanting beams (H1) using Bolts (CC) and Flat
washers (BB).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
15
Attaching the Small Roof Panels 16
Attaching the Small Roof Support
Beam Covers
q
Attach
the S
mall roof long panel
s
(P1) and
S
mall roof
s
hort
panels (P2) to the Small roof frame using Bolts (CC) and
Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach
the S
mall roof support beam cover
s
(S1) to
the
Small roof frame using Bolts (FF) and Flat washers
(BB). Then place the Small roof covers (M) in the Small
roof connector and secure using Bolts (II) (KK) and Flat
washers (BB).
NOTE: To avoid destroying the finish, do not put the parts
on the ground directly.