HAMPTON BAY GFM00469A User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this pergola. We strive to continually create.
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item #
Model # GFM00469A
USE AND CARE GUIDE
ARCHED PERGOLA
Questions, problems, missing parts? Before returning to the store
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
1001 414 646

2
Table of Contents
Table of Contents..........................................................2
Warranty ........................................................................2
What is Covered ...................................................................... 2
What is Not Covered ................................................................ 2
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Warranty
1 YEAR FRAME AND 1 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
Safety Information
PRODUCT CAUTION
This pergola wasmade for the explicit purpose of providing outdoor functions and isnot to be used as a toy. This productisintended for
normal outdoor use; however, the manufacturerrecommends storing and / or covering this pergola when any formidable / severe weather is
he product.
Children under the age of 10 near this product, should be supervised by a competent adult at all times. This productis NOT intended for
commercial use and will void the warranty.
SAFETY WARNINGS
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty. We
reserve the right to make substitutionswith similar merchandise, if the model in question is no longer in production.
Ass . . . ...................ylbme ................................................. 5
Package Cont stne .................................................................... 4
Safety Information .......................................................2
Product Caution .................................................................... 2
WARNING: Please keep children out of the assembly area
before assembly. CAUTION: Do not locate the product near any heat source.
CAUTION: When not inuse, secure the product ina
!
!
Safety Warnings ..................................................................... 2
Care and Cleaning............................ .... .. ......................
17
Maintenance..................................................................18
cool and coveredlocation.
WARNING: This pergola unit is heavy, and may require three
to four adults for safe assembly.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble iton a soft, non-abrasivesurface such as carpet or cardboard.
NOTE: Three to four adults are required to assmeble
this product.
Part Description Quantity
BB M6x18 countersunk bolt 8+1
49+1
HARDWARE INCLUDED
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
CC M6x35 combination bolt 4+1
DD
0 combination bolt8x6M 26+1
NOTE: Hardware not shown to actual size.
EE
16+1
AA BB CC DD
EE FF
FF
Hex wrench 2
AA M6x15 combination bolt
Ground spike

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Right c or rabtcenno 2
B onnector rabctfeL 2
rabsyawhtgneL 4
e top rabdiS 2
Center lengthways bar
Plastic center fabric wheel
Steel rolling wheel
1
3
1
Part Description Quantity
I 1
J Fabric s edah 1
K Magnet i p etalnor 1
L
L1
End tip
Plastic side fabric wheel
4
8
otective cov rerP
C
D
E
E1
E2
Short shade rod 2
Long shade rod 4
Post 4
F
G
H
Q
Center tip 2
R
Post base plate 4
S
Inner tip 8
H
A
B
A
B
C
D
E
F
G
I
J
K
L
L1
D
SQ
R
F
E1
E2
S
SL1
S

1
l
5
Assembly
Insert the left connector bar (B) into the right connector bar (A) and secure the connector bars (A & B) with
M6x15 combination bolts (AA).
Connecting the connector bar with the magnet iron plate
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: Fully tighten all bolts using the hex wrench (FF).
Attach the magnet iron plate (K) to the assembled connector bars (A & B) using M6x15 combination bolts (AA).
A
B
B
AAB
K
K
AA
AA AA
AB

2
l
6
Assembly (continued)
Connecting the connector bar
NOTE: Fully tightenall bolts using the hex wrench (FF).
Insert the left connector bar (B) into the right connector bar (A), and secure the connector bars (A & B) with
M6x15 combination bolts (AA).
A
B
B
A
AA
AA
A
B

3
l
7
Assembly (continued)
Inserting the tips
Insert the end tips (L) into the side top bar (D). Repeat this step for the other side of the top bar (D).
Insert the center tips (Q) into the center lengthways bar (E).
Insert the inner tip (S) into the lengthways bar (C). Repeat this step for the other three lengthways bars (C).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
C
C
S
S
S
3-1
3-2
3-3
E
Q
Q
Q
E
D
L
L
D
L

4
8
Assembly (continued)
Attaching the crossbars
Attach the center lengthways bar (E) with the upturned holes to the center of the connector bars (A & B) without the magnet iron
plate, using M6x80 bolts (DD).
Attach the lengthways bar (C) to the assembled connector bars (A & B) using M6x15 ombination bolts (AA) and M6x80 bolts (DD).
Repeat this step for the other three lengthways bars (C) and the two side top bars (D).
Once all of the bolts are in place, fully tighten the bolts using the hex wrench (FF).
Attach the other side of the center lengthways bar (E) to the center of the connector bars (A & B) using M6x15 ombination bolts (AA)
and M6 80 bolts (DD).
Place the three upturned holes on the top bars (D) and the center lengthways bar (E) toward
the assembled connector bars (A & B) without magnet iron plate (K) to assemble the
protective cover (I) correctly.
NOTE :
C
D
D
C
C
E
A
B
A
AA
DD
A&B
S
DD
AA
E
A
B
K
Q
B
L
D
DD
AA
DD
AE
Q
Q
B
A
E
Q
E
KB
A
A&B
B
The upturned holes are to
lock the protective cover (I)
A&B without
magnet iron plate

5
9
Attach the post base plates (R) to the four posts (H) using M6x15 combination bolts (AA).
Attaching the post base plates to the posts
Assembly (continued)
NOTE: Fully tighten all bolts using the hex wrench (FF).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
R
H
R
AA
H

6
10
Assembly (continued)
Attaching the posts to the assembled structure
Attach the posts (H) to the assembled structure using M6x15 combination bolts(AA) and M6x80 combination bolts(DD).
NOTE:Suggeset using two ladders to assemble this step.
H
D
D
A
B
D
L
DD
AA
A&B
H