HAMPTON BAY L-GZ340PST-3I User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Hampton Bay!
Item #1000 000 000
Model #L-GZ340PST-3I
USE AND CARE GUIDE
HARD TOP GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM

2
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................2
What is Covered.........................................................2
What is Not Covered ..................................................2
Pre-Assembly ................................................................ 3
Planning Assembly .................................................... 3
Hardware Included................................................... 3
Package Contents................................................... 4-6
Assembly ................................................................. 7-12
Care and Cleaning ...................................................... 13
Safety Information
1. More than 1 person is required for this assembly.
2. Some parts may contain sharp edges. Wear
protective gloves.
3. When assembling and using this product, basic
safety precautions should always be followed to
reduce the risk of personal injury and damage to
equipment. Please read all instructions before
assembly and usage.
DANGER: This unit is heavy! Do not assemble
this item alone.
WARNING: Do not leave the gazebo where
there is a risk of high wind, as possible
damage will occur to the structure.
WARNING: Do not climb on top of the gazebo.
Falling off the gazebo can result in serious
injury, possibly even death.
NOTICE: For outdoor use only.
Warranty
1 YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your
item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to
be free from defects in material or workmanship for a period of 1 year.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling
or disassembling the product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD
EE FF GG HH II
JJ KK
Part Description Quantit
y
A
A M6*15 screw 140
BB M6 flat washer 346
CC M6*55 screw 20
DD M6 nut 36
EE M6*35 screw 26
FF M6*15 bolt 96
GG M6*65 bolt 16
HH M6*45 bolt 32
II Ring 88
JJ Φ8*250 stake 16
KK M6*wrench 2

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part name Part Quantity Image
Top frame part A1 2
Long beam B1 2
Support beam C1 4
Connector D1 1
Hook E1 1
Cover 1 F1 2
Cover 2 G1 2
Cover board 1 H1 4
Cover board 2 I1 1
Post A2 4
Post connector B2 4
Beam connector C2 8
Stake cover D2 4
Stake flake E2 4
Oblique beam
connector F2 4

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Top post connector G2 4
Lower post connector H2 4
Short beam I2 4
Long beam J2 4
Arc support K2 8
Long netting beam 1 L2a 2
Long netting beam 2 L2b 2
Short netting beam 1 M2a 2
Short netting beam 2 M2b 2
Top beam A3 4
Top post B3 4
Left long cover 1 C3 2
Right long cover 1 D3 2
Left long cover 2 E3 2
Right long cover 2 F3 2
Left long cover 3 G3 2
Right long cover 3 H3 2
Short cover 1 I3 2

6
Left short cover 2 J3 2
Right short cover 2 K3 2
Left short cover 3 L3 2
Right short cover 3 M3 2
Corner cover N3 4
Middle cover O3 4
Short beam（1）W1 2
Short beam（2）W2 2
Middle short beam
（1）W3 2
Middle short beam
（2）W4 2
Long beam （1）W5 2
Long beam （2）W6 2
Top short beam（1）X1 2
Top short beam（2）X2 2
Top middle beam
（1）X3 2
Top middle beam
（2）X4 2
Top long beam（1）X5 2
Top long beam（2）X6 2
Curtain Q 1
Mosquito netting R 1

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1 Assemble the lower frame of
the small top 2Attach the small top frame
□Attach the Top frame part (A1) to the long beam
(B1) using screws (AA) and flat washers (BB).
NOTE: Dangers are reserved for actions that
will cause bodily harm or possible death.
3 Assembling the top beam
□Attach the support beams (C1) to the connectors (D1)
using bolts (CC), nuts (DD), and flat washers (BB) to
secure.
NOTE: Dan
g
ers are reserved for actions that will
cause bodily harm or possible death.
□Attach the support beam (C1) to the connector of
the top frame part (A1) using screws (AA) and flat
washers (BB).
4 Attaching the hook
□Attach the hook (E1) to the connector (D1) as
shown.
NOTE: Dan
g
ers are reserved for actions that will
cause bodily harm or possible death.

8
Assembly (continued)
5 Assembling the post
connectors and beam
connectors 6 Attaching the oblique beam
connector
□Assemble the post connectors (B2) to the beam
connectors (C2) using bolts (FF) and flat washers
(BB).
□Attaching the oblique beam connector (F2) to the post
connector (B2) using bolts (FF) and flat washers (BB).
NOTE: Dan
g
ers are reserved for actions that will
cause bodily harm or possible death.
7 Assembling the short and
long beams 8 Assembling the top beam and
top posts
□Attach the top post connector (G2) and lower post
connector (H2) to the short beams (I2) and long
beams (J2)) using bolts (GG), flat washers (BB) and
nuts (DD).
□Attach the assembled short beam (I2) and long beam
(J2) to the connecting flap of the beam connectors
(C2) and secure using screws (FF) and flat washers
(BB).
□Attach the top beam (A3) and top posts (B3) to the top
frame part (A1) and secure together using screws (FF)
and flat washers (BB).
□Attach the top beam (A3) to the oblique beam
connector (F2) and top post connector (G2). Secure
them together using bolts (GG), flat washers (BB) and
nuts (DD).

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
9 Attaching the cover and the
oblique beam connector 10 Attaching the cover board
□
A
ttach the cover 1 (F1) and oblique beam connector
(F2) to the support beam (C1) and secure them using
screws (AA) and flat washers (BB). Repeat for the
remaining covers (F1 and G1).
□Attaching the cover board 1(H1) to support beam (C1)
and secure using screws (EE) and flat washers (BB).
Repeat for the remaining cover boards (H1) and support
beams (C1).Then attach cover board 2 (I1) to the
connector (D1) and secure using screws (EE) and flat
washers (BB). Repeat for the remaining cover boards
(I1).
11
Attaching the top beam 12 Attaching the top long beams
to the top post
□Attach the top long beams (X6, X5, W5 and W6) to the
top beams (A3) using screws (AA) and flat washers (BB). □Attach the top long beams (X1 - X6 and W1-W6) to the top posts (B3) using screws (AA) and flat washers (BB).

10
Assembly (continued)
13 Attaching the netting beams 14 Secure the netting beam
□Attaching the top middle beams (X1-X4, and W1-W4) to
the top beams (A3) using screws (AA) and flat washers
(BB).
□Secure one end of long netting beam 1 (L2a) and long
netting beam 2 (L2b) to the top post (B3) using screws
(AA) and flat washers (BB). Repeat for the short netting
beams (M2a and M2b).
□Secure the other ends of the long netting beams 1 (L2a)
and long netting beams 2 (L2b) to the top beams (A3)
using screws (AA) and flat washers (BB). Repeat for the
short netting beams (M2a and M2b).
15 Attaching the long and short
beams 16 Attaching the corner covers
□Attaching the left long cover 1(C3) and left long cover 2
(E3) to the roof assembly using screws (AA) and flat
washers (BB). Repeat this step for the remaining long and
short covers (D3, F3, G3, H3, I3,J3,K3, L3, M3) from top
to bottom way.
□Insert the corner covers (N3) to the holes of the support
beams (C1).
□Secure the corner covers (N3) to the top oblique beam an
d
secure the middle covers (O3) to the top middle beams (X
3
and X4) using screws (EE) and flat washers (BB).